Atlas Craftsman 10″ & 12″ Lathe 24 and 20 tooth reverse tumbler Nylon gear set 1/2″ bore no bushing required! This fine FMD Nylon gear set has improved design for better durability and performance Nylon is a first choice gear material – it is naturally slippery, no lubrication required! Made out of Nylon – tough and flexible plasticNylon gear set runs quieter and smoother Reduces wear on meshing gears Only Nylons should be used for gears where a slippery surface is desired. All other materials (PLA, ABS, PET, etc.) will grind creating a plastic dust and eventually fail! For details, please review all pictures May fit other 1/2″ bore lathes as well. 24t gear outer diameter: 1.625″20t gear outer diameter: 1.375″ Gear hub 0.5″, toothed face width: “0.43” 1/2 Overall Center bore: 1/2″ (0.5″) DP: 16 Do not waste your money on ABS or PLA plastic gear that may strip or even melt! Introductory price – please share installed images and review.
Archives
LA-1213A LP-1014 40 tooth Nylon gear .375″ bore box LB-210 LA-1240-2 Logan lathe
Nylon gear LA-1213A / LP-1014 for Logan 820 lathe, LB gear boxes L-B210 and LA-1240-2 40 tooth gear OD: 2.1″ (53.35mm)40 tooth gear face width: (0.375 3/8) Overall width at hub: 0.375″ (3/8″) Center bore 0.375 (3/8″)Diametrical Pitch (DP): 20 This gear FDM made out of Nylon – tough and flexible plastic No lubrication requiredRuns quieter and smoother than Zamak Only Nylons should be used for gears where a slippery surface is desired. All other materials (PLA, ABC, PET, etc.) will grind creating a plastic dust and eventually fail!For details, please review all pictures and compare to OEM gear shown Do not waste your money for ABS, PLA plastic gear that may strip or melt Thank you.
Atlas 618 Craftman 101 6″ Lathe Change Gear M6-101-56 56 tooth Nylon 100%, new
Atlas 618 Craftsman 101 6″ Lathe 56 Tooth Nylon Gear, OEM Part # M6-101-56This fine Nylon gear has improved design for better durability and performance compare to OEM and superior to other replacements Made in US out of Nylon – tough and flexible plasticNylon naturally slippery, no lubrication required!Runs quieter and smoother Only Nylons should be used for gears where a slippery surface is desired. All other materials (PLA, ABS, PET, etc.) will grind creating a plastic dust and eventually fail! For details, please review all pictures DP: 24 O.D. : 2.42″ (61.37mm) Gear face width: “3/8″ (0.375″) Center keyed bore: 1/2″ (0.5″) May fit other 1/2” bore lathes as well. Do not waste your money on ABS or PLA plastic gear that may strip or even melt! Introductory price – please share installed images and review.
Atlas 618 Craftman 101 6″ Lathe Change Gear M6-101-48 48 tooth Nylon 100%, new
Atlas 618 Craftsman 101 6″ Lathe 48 Tooth Nylon Gear, OEM Part # M6-101-48This fine Nylon gear has improved design for better durability and performance compare to OEM and superior to other replacements Made in US out of Nylon – tough and flexible plasticNylon naturally slippery, no lubrication required!Runs quieter and smoother Only Nylons should be used for gears where a slippery surface is desired. All other materials (PLA, ABS, PET, etc.) will grind creating a plastic dust and eventually fail! For details, please review all pictures DP: 24 O.D. : 2.08″ (2-1/32″) Gear face width: “3/8″ (0.375″) Center bore: 1/2″ (0.5”) with 2 keyways Do not waste your money on ABS or PLA plastic gear that may strip or even melt! Introductory price – please share installed images and review.
Atlas 618 Craftman 101 6″ Lathe Change Gear M6-101-64 64 tooth Nylon 100%, new
Atlas 618 Craftsman 101 6″ Lathe 64 Tooth Nylon Gear, OEM Part # M6-101-64This fine Nylon gear has improved design for better durability and performance compare to OEM and it is superior to other replacements Made in US out of Nylon – tough and flexible plasticNylon naturally slippery, no lubrication required!Runs quieter and smoother Only Nylons should be used for gears where a slippery surface is desired. All other materials (PLA, ABS, PET, etc.) will grind creating a plastic dust and eventually fail! For details, please review all pictures DP: 24 O.D. : 2-3/4″ (2.75″) Gear face width: “3/8″ (0.375″) Center keyed bore: 1/2″ (0.5″) May fit other 1/2” bore lathes as well. Do not waste your money on ABS or PLA plastic gear that may strip or even melt! Introductory price – please share installed images and review.
Atlas 618 Craftsman 101 6″ Lathe 20 and 24 tooth 2 gear set Nylon 100% 1/2″ bore
Atlas Craftsman 6″ Lathe 101, 618 20 and 24 Tooth 2 Gear setpart number M6-59 and M6-60 These fine Nylon gears have improved design for better durability and performance compare to OEM and superior to other replacements US made out of Nylon – tough and flexible plasticNylon naturally slippery, no lubrication required!Runs quieter and smoother Only Nylons should be used for gears where a slippery surface is desired. All other materials (PLA, ABS, PET, etc.) will grind creating a plastic dust and eventually fail! For details, please review all pictures May fit other 1/2″ bore lathes as well. 20 tooth gear O.D. : 15/16″ (23.5mm)24 tooth gear O.D. : 1.083″ (27.5mm) Gear face width: “3/8″ (9.6mm) Center bore: 1/2″ (0.5”) Do not waste your money on ABS or PLA plastic gear that may strip or even melt! Introductory price – please share installed images and review.