2 Inch Rear Lift Blocks for Silverado 1500 Sierra 1500, 2″ Rear Leveling Block K

Menu Other Items Feedbacks About Us Contact Us Add To Favorites 2 Inch Rear Lift Blocks for Silverado 1500 Sierra 1500, 2″ Rear Leveling Block Kit Compatible with 2007-2021 Chevy Silverado 1500, GMC Sierra 1500, Lift Block and Square Leaf Spring Ubolt Kit 【Fitment】Fit for 2007-2021 Silverado 1500 2WD 4WD, 2007-2021 Sierra 1500 2WD 4WD【Performance】CNC machined steel, great compression strength. Durable finish block with 63.5mm width to keep enough safety contact with leaf springs, 10.9-12.9 grade bolts with 9/16 thread pitch and thicker washer【High Quality Block】Black Powder Coated, the surface of lift block is coated with black powder for stronger rust resistance, more beautiful and clean【Contents】2 x rear lift blocks, 4 x extended u-bolts and instructions【Brand Promise】2-year with worry-free after-sales service. We also offer “30-DAYs “We hope that dynofit can make your shopping experience enjoyable. Feel free to if you have any problems(missing parts, quality issues, transportation and more) Product Description Read the description carefully for right choice! Guides:measure/choose right lift—go to variations(including front struct spacers)—year and lift chart—installation tips different years and drivetypes have different stock block, so we need to measure vehicle front and rear heigth then go matchno matter with your bodynumdoors or bodytypethe item usually used after front struct spacers installation, you also can buy our front lift kits if needed Measure/Choose Right Lift step 1: Measure the front from ground to the fender well bottom(such as 38.6″) step 2: Measure the rear like step 1(such as 36.5″) step 3: 38.6-36.5=2.1″,(so we need 2″ around rear lift) step 4: follow the year and chart below Dynofit 2” Rear Lift Blocks Kit Dynofit lift blocks use the technology of FORGED, with stronger stability and better driving experience Fitment 2007-2024 Silverado 1500 2WD/4WD2007-2024 Sierra 1500 2WD/4WDNote: For 2019+ Silverado Sierra 1500, not fit “MONO-LEAF” leaf spring, AT4, TrailBoss. Benifits put it to the original stance, no more rear sag,no more squatting in the reargive you nice rake back to your pickupyour truck have reverse rake in winter even put your weight in the back, it makes much better for hauling, etc Specification: Contents:2 x rear lift blocks, 4 x extended u-bolts and instructions Block width: 63.5mm CNC Craft 10.9-12.9 grade bolts 9/16 thread pitch U.S Based Brand Durable Finish Forged 10.9-12.9 grade bolts Instal Easily 1-2 hrs straight forward installationpaper instruction included and look up utube if necessary Tapered Block Direction the “UP” and “DOWN” go match with your rear leaf springtorque specs:90-100 Extended Long U-Bolts and Steel Blocks powder coated heavy steel help prevent corrosionzinc plated thick bolts, we use these same bolts on several kits, so extra length!everything come with the kit, nice hardwarethe bolts is long and not easy to use impact sometimes, so tighten down with a wrench Excess On Some Trucks using a cutoff wheel ,hacksaw or plasma cutter etcmake sure you have cutting tools if DIY yourself1-3″ will be cut on different truckclean the threads a little before installingor cut off the excess with an angle grinder after installation POSITION DIRECTION LENGTH CUTTING Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 162 4.5 out of 5 stars 1,378 4.5 out of 5 stars 1,378 4.5 out of 5 stars 390 4.5 out of 5 stars 390 4.5 out of 5 stars 1,603 Price $32.99$32.99 $55.90$55.90 $45.88$45.88 $109.99$109.99 $124.99$124.99 $54.99$54.99 Brand DYNOFIT DYNOFIT DYNOFIT DYNOFIT DYNOFIT DYNOFIT Color Black Black Black Black Black Black Lift Height 2-4 inch Rear 3 inch front 2 inch front / / / Thread Pitch / / / M14x1.5 M14x1.5 M14x1.5 Content 2 Shock Extenders 2 front spacers 2 front spacers 4PCS 4PCS 32PCS+1Socket Item Specification Item model number 9R202101-20 Maximum Lifting Height 2 Inches Material Carbon Steel Country of Origin China Manufacturer Part Number 9R202101-20 Item Weight 10.45 pounds Exterior Polished Auto Part Position Rear Model Suspension kits Included Components 4x Extra Long U Bolts, 2x 2inch Block, Lug nuts Package Dimensions 10.39 x 7.01 x 6.06 inches Size 2inch rear Dimensions Shipping Returns Additional Info Product Dimensions: 7.01 inches x 10.39 inches x 6.06 inches. Weight: 10.45 lb Fast shipping is very important for us. Our standard shipping service is FREE. Your order will be shipped within 1-3 business days upon full payment received. Most items are delivered within 3-5 business days, however, please allow 3-10 business days. We are shipping only to USA. We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. We offer a 30 day return policy from checkout winning date. Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization. Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem. Return shipping fees are not refundable. We reserve the right to decline any returns if the above guidelines are not followed. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.

P131 Bypass Pruner

The Fiskars® Solid™ Pruner (P131) is a durable, easy-to-use tool for trimming stems and thin branches. Its fully hardened, precision-ground blade stays sharp longer, while a low-friction blade coating resists rust and allows for smoother, easier cuts.

Stanley Plane Frog Assembly For No. 4 or No. 5 – Type 19, 1948-1961

For a complete description and condition grading, please read the full description before purchasing! A nice frog assembly for Stanley’s vintage No. 34 or No., 5 metallic smoothing planes. This one is a type 19, used from 1947 to 1961. It is in Good Plus condition with no damage. There is some minor wear. Nice original replacement for a damaged frog. Includes all parts of the frog shown (complete).See specs above. Visit my store for more antique and vintage tools and tool parts. My items are carefully packaged and shipped out on the same day payment is received, as long as payment is received by 3 pm Central Time (subject to post office hours, holidays, weekends, etc.) I have a lot of common and some hard-to-find tool parts that are not listed in my store. If you are not able to find what you need, feel free to send me a message and I will get back to you as soon as possible. All of my listed items have been inspected and tested to provide the best possible description. In some cases, parts may be brushed off with a soft-bristled brush, such as a paint brush, to remove surface dust or debris for photos. Unless otherwise noted, parts have not been cleaned beyond this. Although most of my items sell very quickly, metal parts may contain a small layer of oil, WD-40, grease, or similar substance to preserve the item and prevent rusting while it is in inventory. ALL inventory is stored in an environment where climate and humidity are controlled to ensure each item is received in the same condition in which it is presented in the listing. Unless otherwise noted in the listing, photos are of the exact item you will receive. Every single item is listed and packaged by myself and I take pride in carefully packaging all items, regardless of purchase amount. Creating a positive experience for you, the buyer, is my top priority. Positive feedback is left for all buyers as soon as payment is received because by paying for an item you have fulfilled your obligation in the agreement.When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below. This is not necessarily an industry standard for grading, and grading vocabulary will vary from collector to collector since there is some subjectivity involved (i.e. “mint” vs. “near mint”). For these reasons, I will also try to list a description of these grades in each listing in order to clarify the grade given to each item. Please refer to the details below and read the “condition” portion of this listing for the condition grading assigned to this item. MINT: 100% of original finish remaining. No signs of wear or rust – probably never used. No problems or issues. EXCELLENT: 95-99% of original finish remaining. Very slight wear with no rust. No problems or issues. GOOD PLUS: 85-95% of original finish remaining. Used but well maintained. Scuffs, light wear, very little rust. GOOD: 65-85% of original finish remaining. Moderate wear and/or rust. Minor deficiencies – owner’s initials, nicks, etc. GOOD MINUS: 50-65% of original finish remaining. Has seen hard use, but remains serviceable. Scratches, nicks, dents, cracks, chips, improper replacement parts. FAIR: 25-50% of original finish remaining. Heavy wear and rust. Some parts are broken, missing, or improper – serious flaws. POOR: 0-25% of original finish remaining. Pitted, abused, heavily worn. Serious damage and missing major parts.

Stanley Plane Frog Assembly For No. 4 or No. 5 – Type 19, 1948-1961

This one is a type 19, used from 1947 to 1961. Includes all parts of the frog shown (complete). When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below.

Stanley Plane Frog Assembly For No. 4, 4C, 5, & 5C Planes, Type 17 WWII-Era

For a complete description and condition grading, please read the full description before purchasing! A solid original replacement frog assembly for Stanley’s No. 4 and No. 5 bench planes. It was donated from a damaged type 17 (WWII-era) plane and the combination of features is only correct for a type 17 Plane. The depth adjusting nut is Bakelite rather than brass – which is a version Stanley switched to during WWII. It does not have the frog adjusting screw, which is a feature that was dropped for a short time during the war. It is in Good Plus condition with no damage. It works perfectly. For specifications, see the “About This Item > Item Specifics” section of this listing. Visit my store for more antique and vintage tools and tool parts. My items are carefully packaged and shipped out on the same day payment is received, as long as payment is received by 3 pm Central Time (subject to post office hours, holidays, weekends, etc.) I have a lot of common and some hard-to-find tool parts that are not listed in my store. If you are not able to find what you need, feel free to send me a message and I will get back to you as soon as possible. All of my listed items have been inspected and tested to provide the best possible description. In some cases, parts may be brushed off with a soft-bristled brush, such as a paint brush, to remove surface dust or debris for photos. Unless otherwise noted, parts have not been cleaned beyond this. Although most of my items sell very quickly, metal parts may contain a small layer of oil, WD-40, grease, or similar substance to preserve the item and prevent rusting while it is in inventory. ALL inventory is stored in an environment where climate and humidity are controlled to ensure each item is received in the same condition in which it is presented in the listing. Unless otherwise noted in the listing, photos are of the exact item you will receive. Every single item is listed and packaged by myself and I take pride in carefully packaging all items, regardless of purchase amount. Creating a positive experience for you, the buyer, is my top priority. Positive feedback is left for all buyers as soon as payment is received because by paying for an item you have fulfilled your obligation in the agreement. When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below. This is not necessarily an industry standard for grading, and grading vocabulary will vary from collector to collector since there is some subjectivity involved (i.e. “mint” vs. “near mint”). For these reasons, I will also try to list a description of these grades in each listing in order to clarify the grade given to each item. Please refer to the details below and read the “condition” portion of this listing for the condition grading assigned to this item. MINT: 100% of original finish remaining. No signs of wear or rust – probably never used. No problems or issues. EXCELLENT: 95-99% of original finish remaining. Very slight wear with no rust. No problems or issues. GOOD PLUS: 85-95% of original finish remaining. Used but well maintained. Scuffs, light wear, very little rust. GOOD: 65-85% of original finish remaining. Moderate wear and/or rust. Minor deficiencies – owner’s initials, nicks, etc. GOOD MINUS: 50-65% of original finish remaining. Has seen hard use, but remains serviceable. Scratches, nicks, dents, cracks, chips, improper replacement parts. FAIR: 25-50% of original finish remaining. Heavy wear and rust. Some parts are broken, missing, or improper – serious flaws. POOR: 0-25% of original finish remaining. Pitted, abused, heavily worn. Serious damage and missing major parts.

Stanley Plane Frog Assembly For No. 4, 4C, 5, & 5C Planes, Type 17 WWII-Era

For a complete description and condition grading, please read the full description before purchasing! A solid original replacement frog assembly for Stanley’s No. 4 and No. 5 bench planes. It was donated from a damaged type 17 (WWII-era) plane and the combination of features is only correct for a type 17 Plane. The depth adjusting nut is steel rather than brass – which Stanley switched to during WWII. It does still have the frog adjusting mechanism, which is a feature that not all type 17 planes have. Therefore, it will work with a type 16, 18, & 19 plane as well (the only difference being the depth adjusting nut is 1″ steel rather than 1.25″ brass). Good Plus condition with no damage. It works perfectly.For specifications, see the “About This Item > Item Specifics” section of this listing. Visit my store for more antique and vintage tools and tool parts. My items are carefully packaged and shipped out on the same day payment is received, as long as payment is received by 3 pm Central Time (subject to post office hours, holidays, weekends, etc.) I have a lot of common and some hard-to-find tool parts that are not listed in my store. If you are not able to find what you need, feel free to send me a message and I will get back to you as soon as possible. All of my listed items have been inspected and tested to provide the best possible description. In some cases, parts may be brushed off with a soft-bristled brush, such as a paint brush, to remove surface dust or debris for photos. Unless otherwise noted, parts have not been cleaned beyond this. Although most of my items sell very quickly, metal parts may contain a small layer of oil, WD-40, grease, or similar substance to preserve the item and prevent rusting while it is in inventory. ALL inventory is stored in an environment where climate and humidity are controlled to ensure each item is received in the same condition in which it is presented in the listing. Unless otherwise noted in the listing, photos are of the exact item you will receive. Every single item is listed and packaged by myself and I take pride in carefully packaging all items, regardless of purchase amount. Creating a positive experience for you, the buyer, is my top priority. Positive feedback is left for all buyers as soon as payment is received because by paying for an item you have fulfilled your obligation in the agreement.When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below. This is not necessarily an industry standard for grading, and grading vocabulary will vary from collector to collector since there is some subjectivity involved (i.e. “mint” vs. “near mint”). For these reasons, I will also try to list a description of these grades in each listing in order to clarify the grade given to each item. Please refer to the details below and read the “condition” portion of this listing for the condition grading assigned to this item. MINT: 100% of original finish remaining. No signs of wear or rust – probably never used. No problems or issues. EXCELLENT: 95-99% of original finish remaining. Very slight wear with no rust. No problems or issues. GOOD PLUS: 85-95% of original finish remaining. Used but well maintained. Scuffs, light wear, very little rust. GOOD: 65-85% of original finish remaining. Moderate wear and/or rust. Minor deficiencies – owner’s initials, nicks, etc. GOOD MINUS: 50-65% of original finish remaining. Has seen hard use, but remains serviceable. Scratches, nicks, dents, cracks, chips, improper replacement parts. FAIR: 25-50% of original finish remaining. Heavy wear and rust. Some parts are broken, missing, or improper – serious flaws. POOR: 0-25% of original finish remaining. Pitted, abused, heavily worn. Serious damage and missing major parts.

Stanley Plane Frog Assembly For No. 4, 4C, 5, & 5C Planes, Type 17 WWII-Era

The depth adjusting nut is steel rather than brass – which is one of 2 versions Stanley switched to during WWII. It works perfectly. When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below.

Stanley Plane Frog Assembly For No. 4, 4C, 5, & 5C Planes, Type 17 WWII-Era

For a complete description and condition grading, please read the full description before purchasing! A solid original replacement frog assembly for Stanley’s No. 4 and No. 5 bench planes. It was donated from a damaged type 17 (WWII-era) plane and the combination of features is only correct for a type 17 Plane. The depth adjusting nut is steel rather than brass – which Stanley switched to during WWII. It does not have the frog adjusting screw, which is a feature that was dropped for a short time during the war. Good Plus condition with no damage. It works perfectly.For specifications, see the “About This Item > Item Specifics” section of this listing. Visit my store for more antique and vintage tools and tool parts. My items are carefully packaged and shipped out on the same day payment is received, as long as payment is received by 3 pm Central Time (subject to post office hours, holidays, weekends, etc.) I have a lot of common and some hard-to-find tool parts that are not listed in my store. If you are not able to find what you need, feel free to send me a message and I will get back to you as soon as possible. All of my listed items have been inspected and tested to provide the best possible description. In some cases, parts may be brushed off with a soft-bristled brush, such as a paint brush, to remove surface dust or debris for photos. Unless otherwise noted, parts have not been cleaned beyond this. Although most of my items sell very quickly, metal parts may contain a small layer of oil, WD-40, grease, or similar substance to preserve the item and prevent rusting while it is in inventory. ALL inventory is stored in an environment where climate and humidity are controlled to ensure each item is received in the same condition in which it is presented in the listing. Unless otherwise noted in the listing, photos are of the exact item you will receive. Every single item is listed and packaged by myself and I take pride in carefully packaging all items, regardless of purchase amount. Creating a positive experience for you, the buyer, is my top priority. Positive feedback is left for all buyers as soon as payment is received because by paying for an item you have fulfilled your obligation in the agreement.When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below. This is not necessarily an industry standard for grading, and grading vocabulary will vary from collector to collector since there is some subjectivity involved (i.e. “mint” vs. “near mint”). For these reasons, I will also try to list a description of these grades in each listing in order to clarify the grade given to each item. Please refer to the details below and read the “condition” portion of this listing for the condition grading assigned to this item. MINT: 100% of original finish remaining. No signs of wear or rust – probably never used. No problems or issues. EXCELLENT: 95-99% of original finish remaining. Very slight wear with no rust. No problems or issues. GOOD PLUS: 85-95% of original finish remaining. Used but well maintained. Scuffs, light wear, very little rust. GOOD: 65-85% of original finish remaining. Moderate wear and/or rust. Minor deficiencies – owner’s initials, nicks, etc. GOOD MINUS: 50-65% of original finish remaining. Has seen hard use, but remains serviceable. Scratches, nicks, dents, cracks, chips, improper replacement parts. FAIR: 25-50% of original finish remaining. Heavy wear and rust. Some parts are broken, missing, or improper – serious flaws. POOR: 0-25% of original finish remaining. Pitted, abused, heavily worn. Serious damage and missing major parts.

AIRAJ Telescoping Anvil Loppers, Heavy Duty Branch Cutter Tree Trimmer with S…

Ideal Garden Tools: AIRAJ loppers are specially designed to upgrade your gardening experience with an ergonomic design, making outdoor trimming easier. (Blade is sharp, keep away from fingers.). Sharp and Durable: Sharp SK5 steel blade with Teflon coating ensures smooth, clean cuts, rust resistance and long-lasting sharpness for heavy-duty use.

INNOVA OBD2 Scanner Code eader Cable

Model Number: INNOVA OBD2. OBD2 25Pin male to female extension cable. Suitable for 25 Pin OBD-II Car Diagnostic Auto Interface Scanner. Our goal is simple: quality products, clear communication, and a smooth buying experience from start to finish.

Head Up Display, Car HUD P8, OBDII & GPS Dual System, The 1st obd2 Gauge P8

MORE EASY—Easy to install, set up is no more complex than connecting to USB power. 2 KINDS INSTALL—Install on A-Pillar trim or put on dashboard, more easy for use. Simply displays directly to you at whatever angle you set it up is possible, no need to make effort or look down that would create distractions, best assistant to help ensure your driving safety.