Signed “Atha Cast Steel”, it has a 4-5/8″ long head with a 1-1/16″ square face, with a 1-1/8″ wide cross peen end. It is in FAIR overall condition>>>>WITH THE FACE AND PEEN BOTH “TOUCHED UP” POORLY BY A PREVIOUS OWNER, AS PICTURED!
Archives
Atha Top Swage Hammer 7/8” 3 Lbs 8 Oz
Atha top swage hammer 7/8”. 15 1/2” handle and weighs 3 lbs 8 oz in good used condition. See pics
ANTIQUE ATHA BLACKSMITH’S CURVED TONGS 20” NEW JERSEY USA 1881-1913
This is a used antique ATHA Blacksmith’s 20” Tongs. They were made in Newark, New Jersey between 1881-1913. They are engraved on both sides with ATHA Made in USA. Each side has an A inside of a horseshoe and 1/2 below it.
Vtg. Atha Dbl Rounded Shrinking Hammer Horseshoe A Logo Auto body Blacksmith
Rare vintage Atha rounded shrinking Hammer. Used tool but in overall excellent condition. Has the rare A in the horseshoe logo with perfect definitions and deep lines. No gouges or chips to the metal, perfect working surfaces. Hammer head is securely mounted to handle. Hard Hickory handle in good condition with no separated cracks. Please examine photos and message with questions
Vintage Rare Atha Shipwrights Maul Sledge Hammer. 5 lb Size.
This is a good old Atha. Shows some edge chipping but still a good used maul. Actual weight is 5lbs 1.3oz
Vtg ATHA No. 850 Lb. Sledge Hammer 5 3/8″ Wide Twin 1 1/2″ Faces 14 1/2″ Handle
Antique ATHA No. 850 8-sided 3 Lb. Sledgehammer in clean condition. Head measures 5 1/2″ wide, has two 1 1/2″ faces, and has original 14 1/2″ hickory handle. It weighs 3 Lbs. 6.6 Oz. It’s stamped ‘850 3 Made in USA’ and the Atha Horseshoe Logo. Atha stopped making iron tools in the early 1900’s, so this beauty is well over 100 years old! Add it to your hammer collection today! Please look at all the pictures closely as they’re part of the description. Thanks for looking, be sure to check out my hundreds of other Store Items and save me as an eBay Favorite Seller.
Atha 8lb Sledge Hammer Head, Long Nevada Pattern. 100+ Yrs Old
This is a good usable old Atha long Nevada pattern sledge head. The previous owner maintained a nice antique patina finish on this. The actual weight is the full 8lbs
Atha 780 8lb Sledge Hammer Head,6-5/16″ Long,2-1/8″ Oct. Faces,110+ Yrs Old,VGC
For sale is this antique Atha 8lb.
Vintage Atha blacksmiths cross peen chisel ends hammer head
ATHA NO. 1-1/2 Blacksmith 3 Lb Splitting Hammer Head or Railroad Chisel Maul
STANLEY / ATHA – 6oz – BALL PEIN HAMMER WITH THE ORIGINAL HANDLE WITH THE LABEL
All original. Head is very slightly loose on the original handle. Weighs 0lb 11ozs.
Vintage ATHA 6 oz. Ball Peen Hammer – Made in U.S.A.
Atha ball peen hammer OA Weight 6oz.
Small ATHA ball peen hammer with a total weight of 6oz. ATHA logo is visible , but barely, feel free to ask questions
ATHA – 6oz – BALL PEIN HAMMER WITH THE ORIGINAL HANDLE
Head is very slightly loose on the original handle. Weighs 0lb 12ozs.
ATHA 5 Lb Flatter Hammer No. 3 Early Stanley Blacksmith Tool 100+ Years Old
ATHA Tool Co., was founded by Benjamin Atha in Newark, NJ around 1875-1891.
Vintage Atha 6 Pound Peen Hammer Maul Blacksmith USA
Vintage Atha Blacksmith Fuller Hammer Anvil Forge Tool 4 lbs.
It is marked with an A inside of a horseshoe then Atha and 1 3/4.
Vintage ATHA TOOL CO. 2 LB. Double Face Sledge Blacksmith Hammer Head Clean
Antique ATHA TOOL CO. 2 Lb. It has a rounded 1″ face as well as an eight sided flat 1′ face. Head is stamped ‘Atha Tool Co’ inside their horseshoe logo and well as 2 and Cast Steel. Atha stopped making iron tools back in the early 1900’s, so this head is well over 100 years old!
Blacksmith Forging Punch Hammer Lot Of 5 – Atha / Heller Bros / Wooding Verona
Top to bottom Wooding Verona 3/8″ square – very little wear Heller Bros 3/8″ round – slightly bent Heller Bros 5/8″ round – punch end is worn Atha 3/8″ round – very little wear Atha 3/4″ round – no handle All hammers have been used and damage is to be expected. Please see all pictures
Vtg ATHA Tool Co 2# Blacksmith Hammer Sledge Head Cast Steel Horseshoe Logo
Beautiful blacksmith hammer, perfect size for home workshop as well. See photos for details, just needs a little redoing or touchup on the neck of the handle, but otherwise it’s in working order.
Antique Atha Blacksmith’s Forming Hammer,7-3/8″ Head,1-1/16″ Flat & Domed Faces
Overall with handle. The 16-1/4″ long wooden handle is straight, sound, solid, and original. There are no personal markings from previous owners. It’s a rare to find example in any condition, let alone in this excellent condition, so don’t let this one get away.
1890 Atha Tool Company Billhead Blacksmith Swage Fuller Receipt
1890 sales invoice from Atha tool company. Very nice condition. I have quite a few old tool company invoices and related items I will be listing
ATHA Vintage Blacksmith Hammer, 3 Lb. Total Weight including Handle, Made in USA
Head Weight. 14″ Length. This item is in Good Used Working Condition.
Vtg ATHA Sledge Hammer Head 3-1/2 Lbs Cast Steel Horseshow Made In USA TOOL
Includes exactly what is shown in the photos and nothing else. If you see it in the photos it’s included.If you don’t see it in the photos it’s not.
Antique ATHA Tool Co Ball Peen Hammer on AMPCO Handle, 10-1/4″ Long, 10.3oz
For sale is an antique ATHA Tool Co ball peen hammer. The hammer head has the ATHA horseshoe logo which is now hard to see, the hammer looks to have been put on an AMPCO handle, the handle is 10-1/4″ long, the hammer does not have a wedge in the handle and may need one, the hammer weighs a total of 10.3oz, and is in good condition showing normal use, see photos to determine condition (inventory #H493)Check out my store for more vintage tools.