The Bridge City Tools AS-24v3 adjustable angle square with 3 cursors is a precision tool designed for carpenters and woodworking enthusiasts. With its adjustable angles and three cursors, it allows for precise measurements and ensures accurate results. Made by Bridge City Tool Works, a reputable brand known for quality tools, this adjustable angle square is a must-have for professionals and hobbyists alike. Its sturdy construction and easy-to-use design make it a valuable addition to any workshop.
Archives
BRIDGE CITY TOOLS AS-14 ADJUSTABLE TRY SQUARE ORIGINAL BOX EXCELLENT CONDITION
This thing don’t look used or abused just taken well care of. All the numbers and lines are almost perfect condition. There are a few scratches on the handle part and little discoloration. Everything moves as it should.
Early Vintage 1984 Bridge City Tool Works AS-24” Adjustable Angle Square in box
This is an early version of Bridge City Tool Works AS-24 Adjustable Angle Square where the Juara wood is attached to the brass faces with epoxy. Later versions used brass screws. The hang hole at the end of the arm is factory original.
Bridge City Toolworks BV-1 Bench Vise (2001) – Mint
The BV-1 was one of the first vises designed by John Economaki for Bridge City Toolworks, produced in limited numbers in 2001. – Model: BV-1 Bench Vise (2001). – BV-1 Bench Vise (complete as shown). – Part of Bridge City’s short-lived “Legendary Tools” series.
Bridge City Tool Works 6” BR-6 Triangle Ruler Zero Glare Metal Precision
Bridge City Tool Works 6” BR-6 Triangle Ruler Zero Glare Metal Precision
Bridge City Tool Works HG-4 Honing Guide Precision Sharpening Guide New
Bridge City Tool Works HG-4 Honing Guide, one of the most precise and versatile sharpening guides available for woodworking chisels and plane irons. Precision honing guide for chisels and plane irons.
Bridge City Tool Works MP-8 Machine Protractor complete & unused in original box
Unused Bridge City Tool Works MP-8 Machine Protractor in original box with instructions. Designed to set angles on drill presses and bandsaws but has many other uses.
Bridge City Tool Works TS-1.5 Try Square with COA and Original Box
Tool shows signs of normal use.
Bridge City Tool Works TS-2 – Master Try Square
Bridge City Tool Works – TS-2 Master Try Square. Has two small holes on the back where it was mounted on a display board. Comes with a nice display tag. see pictures.
Minty BRIDGE CITY TOOL WORKS MS-2 MITER SQUARE 1973 Portland
The MS-2 Master Miter Square is the largest of our family of miter squares and our most popular size. With a substantial 9-1/2″ blade length, it is as inviting to hold as it is to use. MS-2 MASTER MITER SQUARE.
BRIDGE CITY Pantograph PG-27 Signature Series 2001 BASE ONLY
There are 3D pantographs used for creating multiple copies of sculptures and other forms to avoid the tedium of producing work in quantity. Pantographs were used extensively for minting, engraving and other tasks where images needed to be reduced for reproductive purposes.
Bridge City Palm Brace PB-1 Brand New Never Used Bridge City Tool Works 2000
From John Stanley Antique Tools – We recently purchased a collection of Bridge City Tools. We will try to mix them in with our other listings over the next 3-4 months. You may want to check back occasionally to see what we have listed. As you are probably aware, Bridge City Tools was sold to a Chinese company and are now made in China. If you are in the market for Bridge City Tools and you want the originals that were made in Portland, Oregon your only option is to buy pre-owned or used. This listing is for a Bridge City Palm Brace PB-1 Brand New Never Used by Bridge City Tool Works. Signature series 2000. Rosewood and brass. One of the most collectible BCTW tools made. The original owner made custom cabinets to display these tools and did not keep many of the boxes or papers. No box or papers with these unless shown. We will gladly combine items to save on your shipping costs when practical and possible. While here why not visit our ebay store where we have hundreds of items listed. Enter key words in the search bar to find certain items or browse by store category. You may be surprised at what we have listed. Check out our other items! Be sure to add us to your favorites list!
Bridge City Tool Works TS-1 – Jointmaker’s Square
Bridge City Tool Works – TS-1 Jointmaker’s Square. Has two small holes on the back where it was mounted on a display board. Comes with a nice display tag. see pictures.
Bridge City Tool Works Carpenter Marking Gauge MG 1 Original Box – NICE !
Bridge City Tool Works MG 1 Carpenter Marking Gauge Original Box. Lovingly used by a woodworker since the 1980’s. VERY nice condition!
NOS 2007 Bridge City Tools HP-6v2 Plane 0.062″ (1/16″) Dado Sole & Iron, MINT
The sole & iron are designed to plane precise dados for inlay, stringing, or decorative uses. This kit includes Solid brass front & rear plane soles. Scoring cutter mounting screw and 1/16″ Allen wrench.
Bridge City Tool Works PARING GUIDE SET JM-6 JM-18 JM-24 Great Condition 1999 SS
Vintage Bridge City Tool Works Pairing Guide Set. Includes JM-6 JM-18 JM-24 1999 Signature Series Please see ALL pictures and send a message if you want more. Tools appear to have never been used, but I am not a wood worker/carpenter. The Bridge City Tool Works Paring Guide Set includes three antique original guides, the JM-6, JM-18, and JM-24. Made in the United States in 1999, these tools are highly sought after by collectors in the woodworking and carpentry community. With the brand’s reputation for quality craftsmanship, this set is sure to be in great condition and a valuable addition to any collection.
Bridge City Palm Brace PB-1 Never Used Bridge City Tool Works 2000 without box
The Bridge City Palm Brace PB-1 is a vintage original tool produced by Bridge City Tool Works in 2000. Made in the United States, this palm brace is a collectible piece for carpenters and woodworking enthusiasts. This never-used tool is a rare find without its original box, making it a valuable addition to any tool collection. With its sturdy construction and specific Bridge City Tool Item No.: PB-1, this palm brace offers quality and authenticity to its user.
Bridge City Toolworks JS-7 Japanese Adjustable Depth Dozuki Signature Clean
Looks to be never used.
Bridge City Tool Works DS-1 – Dovetail Square
Bridge City Tool Works – DS-1 Dovetail Square. Has two small holes on the back where it was mounted on a display board. Comes with a nice display tag. see pictures.
Bridge City Tool Works MS-1 Joint Maker’s Miter Square
Bridge City tools – MS-1 Joint Maker’s Square Comes with a display tag. There are two small holes on the back. It was mounted on a plaque at one time.
Bridge City Tool Works TS-3 – Double Square
Bridge City Tool Works – TS-3 Double Square. Has three small holes on the back where it was mounted on a display board. Comes with a nice display tag. see pictures.
BRIDGE CITY TOOL WORKS PORTLAND, OREGON TB-1 T-BEVEL SQUARE
Bridge City Tool Works. TB1 T-Bevel. Comes with a display tag. Has two small holes on the back side as it was attached to a display at one time.
Bridge City Tool Works Depth Gauge DG 2 and Height Gauge HG 2 Original Box
Bridge City Tool Works CS-6 Combination Square – Precision 6″ Combination…
Bridge City Tool Works Saddle Square No. SS-2
Bridge City Tool Works SS-2 Saddle Square in nicely used condition. No box, or instructions. Just the good ole tool. We invite you to read our feed back.
12