Archives

This is our small blacksmith, knifemaking forge with 12×12 cm (approx. 5×5″) opening without the bottom plate, and length 30 cm (approx. 12″) with Sliding support. It comes with 2/3″ gas/propane burner. The burner comes pre-assembled, however we recommend you should check the fittings for leakage before firing. Burncraft brand burner comes with precision cast steel head, which draws a lot of air due to precise proportions to create a very efficient Venturi effect. The burner burns so efficiently that it does not require forced air supply. The gas control valve and air control wheel allow you to accurately dial the desired mixture of air and gas and achieve the desired temperature results. Our burner is so efficient that it needs very little gas / propane to achieve very high temperatures. Suitable for melting soft metals, general blacksmithing, forging Damascus steel, hardening blades, etc. The burner is designed so that all the components are removable and replaceable. Spare parts are available upon request. Burner is the size of 13,8 inch(approx.350mm) burner’s nozzle diameter is 2 inch (approx.48.5mm) that part of the burner where the air enters has a size of 2.3 inch (approx. 58mm) The hose comes with 8 mm internal opening. We do not provide Gas pressure regulator due to different country standards. It is much easier to provide your own that fits your country’s standards than having to deal with the trouble to find the right adapter. We consider it much better, for you to work with the pressure regulators you are accustom to and familiar with in your own country. Just make sure to get the high pressure type of regulator.Features of the forge:- Easy to remove and attach burner.- 30 cm (12″) deep forge body.- 12×12 cm opening without the bottom plate, about 12×10 cm with the plate.- 2.5 см (1″) high-temp ceramic insulation (holds up to 1500 C).- Sliding support for long stock, extends up to 35 cm (14″) in front of the opening.- 38 cm (15″) high-temp bottom stone plate that extends past the forge to support optional fireproof bricks at both ends of the forge for reaching higher temperatures when needed.- Less than one minute from firing to metal in red-hot temperatures (depends on the thickness of the stock).- All burner parts replaceable and serviceable. Please remember to always check your fittings for leaks at each fire up, especially before the first firing. Working with burners and forges is literally playing with fire, so please stay safe and take all necessary safety measures. Should you have any questions we would be happy to answer them. Please use the eBay messaging system. Please note that we are in the European Union, therefore no additional fees and taxes for countries within the EU. All other countries may require custom fees and other taxes. They are your sole responsibility. Please note that delivery to the islands and remote areas is discussed separately in each case.

This is our small blacksmith, knifemaking forge with 12×12 cm (approx. 5×5″) opening without the bottom plate. and length 41 cm (approx. 16,1″) with DOUBLE Burner. Burners are the size of 13,8 inch(approx.350mm) burner’s nozzle diameter is 2 inch (approx.48.5mm) that part of the burner where the air enters has a size of 2.3 inch (approx. 58mm) The burner is designed so that all the components are removable and replaceable. Spare parts are available upon request. The hose comes with 8 mm internal opening. We do not provide Gas pressure regulator due to different country standards. It is much easier to provide your own that fits your country’s standards than having to deal with the trouble to find the right adapter. We consider it much better, for you to work with the pressure regulators you are accustom to and familiar with in your own country. Just make sure to get the high pressure type of regulator. Should you have any questions we would be happy to answer them. Please use the eBay messaging system. Please note that we are in the European Union, therefore no additional fees and taxes for countries within the EU. All other countries may require custom fees and other taxes. They are your sole responsibility. Please note that delivery to the islands and remote areas is discussed separately in each case.

This burner for forges and smelters is the size of 13,8 inch(approx.350mm) burner’s nozzle diameter is 2 inch (approx.48.5mm) that part of the burner where the air enters has a size of 2.3 inch (approx. 58mm)The Burncraft burner comes with a precision cast steel head that draws in a lot of air thanks to precise proportions to create a very effective venturi effect. The burner burns so efficiently that it does not require forced air supply.The gas control valve and air control wheel allow you to accurately dial the desired mixture of air and gas and achieve the desired temperature results. Our burner is so efficient that it requires very little gas / propane to reach very high temperatures. Suitable for smelting soft metals, general blacksmithing, forging damask steel, hardening blades, etc. The burner is designed so that all components are removable and replaceable. Spare parts are available upon request. The hose has an internal hole of 8 mm. We do not provide gas pressure regulators due to different country standards. It is much easier to provide your own, which meets the standards of your country, than to deal with finding the right adapter. We believe that you are better off working with pressure regulators that you are used to and familiar with in your country. Just make sure you get a high pressure regulator.The burner is supplied pre-assembled, but it comes in two parts to provide a more suitable size for transport.You can watch the video how the burner works and is regulated, on the YouTube hosting, on request in the search “burncraft gas burner” Please remember to always check fittings for leaks every time you turn them on, especially before the first start. Work with burners and forges literally plays with fire, so please be careful and take all necessary safety measures. If you have any questions, we will be happy to answer them. Please use the eBay messaging system or call us at +359 887815140. We are located in Bulgaria, so please make sure that you select the correct time within the GMT +2 time zone. We speak English, Bulgarian and Russian. Please note that we are located in the European Union, therefore no additional fees and taxes for countries within the EU. All other countries may require customs duties and other taxes. This is your sole responsibility.Please note that delivery to the islands and remote areas is discussed separately in each case.