Vintage Chas Parker No. 973 Bench Vise Jack Screw Spindle Shaft Handle Assembly. These parts came off of Chas Parker no. 973 vise. Handle looks pretty straight and shaft and threaded hub work smoothly. The pin that holds the hub in place is also included. You will receive only the parts shown in the first 22 pictures the last 2 pictures are for vise model number identification purposes ONLY!! please look at all of the pictures for contents, details and condition and feel free to ask any questions. Other parts from this vise will be listed separately so please check my listing. Thanks
Archives
CHARLES PARKER SWIVEL BASE LOCK RING WEDGE FOR NO. 204 VISE , 9/16-12 TPI
AS SHOWN
CHARLES PARKER VISE SWIVEL BASE LOCK DOWN STUD AND SNAP RING 7/16 For #1 Wrench
Good condition no issues
Chas Charles Parker 474 974 Bench Vise Lock Down #2 Wrench
Chas Charles Parker 974 Bench Vise Lock Down #2 Wrench. I believe it fits a 474 as well. Good detail on the handle. Has some paint, but would clean up real nice with a brass wire wheel.
Chas Charles Parker 974 474 4″ Bench Vise Front Jaw Sliding Section
This appears to have a repair at the front of the rail as seen in the pictures. Worked, aligned, and functioned perfectly.
Charles Parker Vise Parts, No. 434. 1/2, Swivel Base And Bolt, And Pin
parts from a Parker 434. 1/2 needs some cleaning
Chas Charles Parker 474 974 Bench Vise Swivel Base Plate
This is in excellent shape and worked perfectly.
ORIGINAL CHARLES PARKER No. 2 VISE WRENCH
Very nice original Parker No2 wrench.
Chas Charles Parker 474 974 Bench Vise Lock Down Bolt, Snap Ring, 9/16″, 12 TPI
This is in very nice shape and worked perfectly. 9/16″ OD with 12 TPI. Check your bolt’s LENGTH to see if this is the one for you.
Vintage CHARLES PARKER 973-1/2 Vise Swivel Base
Vintage Vise Swivel BaseCharles Parker No. 973-1/2Center bolt is includedGood used condition
Vintage Chas. Parker No. 955 Bench Vise Good Condition
The vise had a few layers of nasty paint on it when I received it so it has been stripped, cleaned and oiled. No cracks, brakes or slop was detected. The vise has been in a dehumidified room on a shelf so it will need grease/oil before use.
Chas Charles Parker 474 974 Bench Vise Lock Down #2 Wrench
This is in very nice shape and worked perfectly.
Chas Charles Parker 474 974 Bench Vise Swivel Base Lock Down Bolt, Snap Ring
This is in very nice shape and worked perfectly. 9/16″ OD with 12 TPI.
ANTIQUE Charles Parker No. 0 ~~ 4″ Jaws Chas Parker Bench VISE Meriden CT Conn
Vintage Parker 104-P The Chas Parker Vise Co. Meriden CT USA
104-P chas. Parker bench vise still opens and closes smoothly Very heavy almost 50lbs
Chas Charles Parker 474 Bench Vise Spindle Nut Jack Screw Retainer Block 449
This is in very nice shape and worked perfectly.
Vintage Parker Vice no.102 The Chas Parker Vise Co. Meriden CT USA
This vice has been repainted and looks pretty clean. It works well and has good jaws.
VTG Charles Parker No. 106 Bench Vise 5” jaws 80+ lbs WORKING CONDITION RARE!!
WORKING CONDITION VINTAGE CHARLES PARKER VISE RARE MODEL: 106 5 INCH JAWS PLEASE SEE ALL PHOTOS CLOSELY FOR BEST CONDITION ASSESSMENT OR FEEL FREE TO ASK ANY QUESTIONS DUE TO WEIGHT OF VISE 80+ LBS. LOCAL PICK-UP PREFERRED