Fiery Furnace Blacksmith – Firepot 10×12-inch For Blacksmithing Forge – USA MADE

Alaska, Hawaii and Puerto Rico Customers,Please see shipping note below! THE FABRICATED BLACKSMITH’S FIREPOT My firepots have been a huge success over the last 5 years that we’ve been offering them for sale. There are literally thousands currently in use from coast to coast, border to border, in the U.S. and World Wide! If you need a new firepot to replace your old cast iron one, if you’re fixing up an old forge, building a new one, or building your first ever forge, this could be the heart and soul of your forge and you will love it! This is the same style and size firepot that I’ve used in my own shop, full time. I have been using it for about 6-7 years now, and love it. In my years of blacksmithing I have used a number of shapes, sizes, and styles of firepots. I have always fabricated my own instead of buying the expensive cast iron pots. Those firepots are running between $300 and $400 nowadays PLUS shipping. Fabricated firepots DO NOT require ANY lining like cast iron forges/pots. Fabricated steel is not susceptible to cracking during temperature changes like cast iron is. So here, for your consideration, is my own fabricated steel firepot. They are made right here in Columbia, Kentucky by me and my helpers in my shop. Here are the specs. The inside dimensions of the pot are approximately 10-inches x 12-inches x 3.5-inches.The firepot is made entirely from 1/2-inch thick, plasma cut plate steel, and is welded inside and out. The lip is 1/4-inch plate steelThis firepot will fit in a forge with a minimum 10.5-inch x 12.25-inch rectangular hole in it. The hole in your forge doesn’t need to be any larger than 11.75-inches x 13.75-inches. My firepots come complete and ready to use with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump / air pipe system is one-piece and bolts on to the firepot. (The firepot will come disassembled and will require you to attach the ash dump and clinker breaker with a 9/16-inch socket / wrench.) The ash dump is 11-inches long and 3.5-inches square. It has two tabs on it, which hold the two 3/8-inch bolts to fasten it to the firepot. (Bolts ARE included) It has a weighted ash dump door that permits you to dump coal ashes that are fed through the clinker breaker. The air inlet pipe is 3-inches round (outside diameter,) and is 4.5-inches long. The clinker breaker is made with a piece of 1/2-inch thick plate steel, the same as the firepot, and a 1/2-inch round steel handle. It fits in a slot in the ash dump. The round hole in the bottom of the fire pot is 3-inches in diameter, and the clinker breaker is 2.5 inches in diameter, which leaves a 1/4-inch slot all the way around for air to come into the firepot from your blower. This works quite well. The assembled firepot weighs about 40 pounds. I have used these pots on a daily basis to forge the hammers, punches, and tongs that I sell here on my eBay store. They will give you many years of good service when taken care of properly. The in-use pictures are of my own coal forge in my own shop. The hot billet shown on the anvil is a 2.25-inch diameter, 4.25-inch long, 4.75 pound hammer billet heated up to full forging temperature from 35 degrees in 9 minutes. I am personally using a Dayton 1TDP7 blower and air gate control. Alaska, Hawaii and Puerto Rico Customers need to contact me for an accurate shipping quote BEFORE ordering, otherwise a surcharge of $100 extra shipping will be automatically included. ________________________________________________________________ Check out the rest of my store! https://www.ebay.com/str/fieryfurnaceforge SHIPPING NOTE: I currently have a 5-business day handling time on this product. Business days are Monday-Friday! I work hard to get products shipped as fast as possible. Our regular shipping days are Tuesday and Friday! As always, if you have any questions feel free to contact me and I will be happy to assist any way I can! (Remember, business days are Monday-Friday. If you send me a message Friday evening, it may take us until Monday evening to respond.) Thanks for supporting the forge! Dave CusterFiery Furnace Forge Blacksmith Company

10×12 Inch Welded Blacksmith Firepot 2600F Rated Blacksmith’s Welded Coal Forge

Welded Blacksmith Firepot 10×12 Inch 2600F Rated Blacksmith’s Welded Coal Forge for Forging Blacksmith Tools Knife Making Farrier Equipment Wide Application: The firepot is one of the most important tools in a blacksmith’s workshop. Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower. Upgrade Design: The assembled firepot weighs about 40 pounds and uses with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot. Disassembled firepot require a 9/16″ socket/wrench to connect the ash dump and clinker breaker. Firepot: Inside dimensions are approximately 10″ x 12″ x 3.5″. Constructed entirely from 1/2″ thick plasma cut plate steel, welded inside and out. The lip is 1/4-inch plate steel. Ideal for forging where there are at least a 10.5″ x 12.25″ rectangular hole. Ash Dump: 12″ long, 3.5″ square. It has two tabs on it for fixing two 3/8″ bolts to the firepot. (Bolts included) It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker. The air inlet pipe is 3″ round (outer diameter) and 4″ long. Clinker Breaker: Constructed from a piece of 1/2″ thick steel plate with a 1/2″ round steel handle. It fits in a slot in the ash dump. The round hole in the bottom of the firepot is 3″ in diameter and the clinker breaker is 2.5″ in diameter, leaving a 1/4″ slot around it to let air from the blower into the firepot. Welded Blacksmith Firepot The firepot is one of the most important tools in a blacksmith’s workshop. Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower. Firepot: Weigh about 40 pounds Inside dimensions are approximately 10″ x 12″ x 3.5″ Ideal for forging where there are at least a 10.5″ x 12.25″ rectangular hole The round hole in the bottom of the firepot is 3″ in diameter Ash Dump: 12″ long, 3.5″ square It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker Air inlet pipe: 3″ round (outer diameter) and 4″ long Clinker Breaker: With a 1/2″ round steel handle Fit in a slot in the ash dump 2.5″ in diameter, leaving a 1/4″ slot around it to let air from the blower into the firepot Upgrade Design Use with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot. During operation, fuel is placed in or on the hearth and ignited. Move the air source to introduce additional air into the fire through the tuyere. With more air, the fire consumes more fuel and burns hotter. Heavy-Duty Steel Construction Made entirely from 1/2-inch thick, plasma cut plate steel, and is welded inside and out for long-lasting reliability. Best substitute for cast iron firepot, it will not develop any cracking like cast iron when the fabricated firepot is exposed to temperature changes. Payment: Kindly know we accept PayPal payment only. Shipping Policy: Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Normally it takes 2-5 days of shipping for US address, please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities. Return & Warranty: 1.We accept 30 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 30 days of receipt, and we shall be happy to exchange or refund. 2.Leave a message note in returned box quoting your item(s) ID and buyer ID. 3.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns. 4.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit. 5.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return. Contact us: If you have any problem about the products and purchase, please feel free to contact us. We will try our best to solve your problem. WE WILL REPLY YOU ASAP. About Feedback: Please contact us before leaving Netural or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. If you are satisfied with our service, please kindly leave us a 5-star feedback. Thanks!

Forge Coal 25lbs

Nobody ships faster than me. Check my feedback if you have any concerns. Listing is for one, 25lb. box of Bituminous Forge Coal. Crushed and processed, ready to use. Very hot burning! Crushed into 1″ to 3″ chunks. Also works great in coal stoves! Unlimited quantities are available. Also, I sell my coal in boxes instead of bags like some other people are doing, because you can stack a couple thousand pounds of boxed coal into a small corner of a garage very quickly without making a mess and it stays put and does not fall over. The boxes also keep the coal nice and dry. I ship all my boxes of coal with plastic liners in the box to protect the coal from water damage. Also, Check out my other items!! Thanks for looking.

Blacksmithing Coal (15lbs)

I have some Bituminous blacksmithing/stove coal up for sale. Listing is for one, 15lb. box of Coal. Crushed and processed, ready to use. Crushed into 1″ to 3″ chunks. Works great in coal stoves! Unlimited quantities are available. Free Shipping! Also, I sell my coal in boxes instead of bags like some other people are doing, because you can stack a couple thousand pounds of boxed coal into a small corner of a garage very quickly without making a mess and it stays put and does not fall over. The boxes also keep the coal nice and dry. I ship all my boxes of coal with plastic liners in the box to protect the coal from water damage. Feel free to call if you have any questions. Six six zero, two zero zero, six nine eight five. Also, Check out my other items! Thanks for looking.

Welded Blacksmithing Firepot 10×12-inch For Blacksmith Forge Knife Welded Coal

Welded Blacksmith Firepot 10×12 Inch 2600F Rated Blacksmith’s Welded Coal Forge for Forging Blacksmith Tools Knife Making Farrier Equipment Wide Application: The firepot is one of the most important tools in a blacksmith’s workshop. Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower. Upgrade Design: The assembled firepot weighs about 40 pounds and uses with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot. Disassembled firepot require a 9/16″ socket/wrench to connect the ash dump and clinker breaker. Firepot: Inside dimensions are approximately 10″ x 12″ x 3.5″. Constructed entirely from 1/2″ thick plasma cut plate steel, welded inside and out. The lip is 1/4-inch plate steel. Ideal for forging where there are at least a 10.5″ x 12.25″ rectangular hole. Ash Dump: 12″ long, 3.5″ square. It has two tabs on it for fixing two 3/8″ bolts to the firepot. (Bolts included) It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker. The air inlet pipe is 3″ round (outer diameter) and 4″ long. Clinker Breaker: Constructed from a piece of 1/2″ thick steel plate with a 1/2″ round steel handle. It fits in a slot in the ash dump. The round hole in the bottom of the firepot is 3″ in diameter and the clinker breaker is 2.5″ in diameter, leaving a 1/4″ slot around it to let air from the blower into the firepot. Welded Blacksmith Firepot The firepot is one of the most important tools in a blacksmith’s workshop. Ideal for forging hammers, punches, tongs and other metalworking jobs with the help of a hand crank blower. Firepot: Weigh about 40 pounds Inside dimensions are approximately 10″ x 12″ x 3.5″ Ideal for forging where there are at least a 10.5″ x 12.25″ rectangular hole The round hole in the bottom of the firepot is 3″ in diameter Ash Dump: 12″ long, 3.5″ square It has a weighted ash dump door that allows you to dump coal ash fed through the clinker breaker Air inlet pipe: 3″ round (outer diameter) and 4″ long Clinker Breaker: With a 1/2″ round steel handle Fit in a slot in the ash dump 2.5″ in diameter, leaving a 1/4″ slot around it to let air from the blower into the firepot Upgrade Design Use with a clinker breaker, weighted ash dump, and air-inlet pipe. The ash dump/air pipe system is one piece and bolted to the firepot. During operation, fuel is placed in or on the hearth and ignited. Move the air source to introduce additional air into the fire through the tuyere. With more air, the fire consumes more fuel and burns hotter. Heavy-Duty Steel Construction Made entirely from 1/2-inch thick, plasma cut plate steel, and is welded inside and out for long-lasting reliability. Best substitute for cast iron firepot, it will not develop any cracking like cast iron when the fabricated firepot is exposed to temperature changes. Payment: Kindly know we accept PayPal payment only. Shipping Policy: Orders will be ship out within 1-2 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Normally it takes 2-5 days of shipping for US address, please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities. Return & Warranty: 1.We accept 30 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 30 days of receipt, and we shall be happy to exchange or refund. 2.Leave a message note in returned box quoting your item(s) ID and buyer ID. 3.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns. 4.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit. 5.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return. Contact us: If you have any problem about the products and purchase, please feel free to contact us. We will try our best to solve your problem. WE WILL REPLY YOU ASAP. About Feedback: Please contact us before leaving Netural or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. If you are satisfied with our service, please kindly leave us a 5-star feedback. Thanks!

COAL FOR CHRISTMAS

KENTUCKY BITUMINOUS COAL APP. 1/2 INCHESCOAL 1 PIECE SHAPE AND SIZE OF COAL VARIES

COAL (REAL)

KENTUCKY BITUMINOUS COAL. COAL 1 PIECE. SHAPE AND SIZE OF COAL VARIES.

BITUMINOUS BLACKSMITH COAL 50lbs

Listing is for two, 25lb. boxes of Bituminous Coal for a total of 50lbs of Coal. Crushed and processed, ready to use. Very hot burning! Crushed into 1″ to 3″ chunks. Also works great in coal stoves! Unlimited quantities are available. Also, I sell my coal in boxes instead of bags like some other people are doing, because you can stack a couple thousand pounds of boxed coal into a small corner of a garage very quickly without making a mess and it stays put and does not fall over. The boxes also keep the coal nice and dry. I ship all my boxes of coal with plastic liners in the box to protect the coal from water damage. Feel free to call if you have any questions. Six six zero, two zero zero, six nine eight five. Also, Check out my Check out my other items!! Thanks for looking.