Here is a nice 9″ smooth plane by Buck Brothers, for your workbench! The plane has been used once or twice and is in excellent condition. Included is the original box & direction pamphlet.
Archives
Orig. Box for Lie-Nielsen #66 Iron Beading Tool LN-66 Iron – Unused
New box for a Lie-Nielsen 66 beading tool. Includes packing material as shown.
Lie-Nielsen Bronze Scraping Plane No. 212 with BLADE SET
DON’T KNOW IF IT HAS BEEN USED, LITING AS USED.
New Lie-Nielsen Large Shoulder Plane No. 073, includes new extra blade.
Box opened only to photograph contents. Manufactured in May of 2016. Blade is cryogenically treated and double tempered; 25° bevel. A professional-quality shoulder plane with the heft, machining accuracy, and adjustability Lie-Nielsen is known for.
Lie Nielsen USA No. 4 1/2 – 10.25″ x 2.9″ x 5.5″ – 5 lbs. 12 oz
Condition: Pre-Owned. Box was toast, so I threw it out. There was a little bit of rust that I did clean off. Light wear consistent with age and normal use.
Made in USA Modern STANLEY No. 4 Smooth Plane H1204(12-204E)
No. 4 Smooth Plane H1204(12-204E). Made in USA. Buying more than one item?.
Stanley SB4 wood plane
Bed behind frog is marked SB4 with no country of mfg. Tote & knob are nylon or hard plastic. Finish is 100%, new, never used.
Stanley planes, No. 220 & SB4
Marked SB4 Stanley on cap iron full decal & England SB4 on bed behind frog & Stanley on toe. Japanning & composition handles are very good. I have tried this plane in “as acquired” condition & seems to do a nice job as is.
nice Stanley SB 4 wood plane w/ dual blade adjusters made in England
You are bidding on one Stanley Number SB 4 wood plane as pictured.It is marked “STANLEY” on the front end, “ENGLAND SB 4” in front of the rear handle, and “STANLEY SB 4″ on the decal on the cap. The iron is not marked. The body is about 9-3/4″ in length including the tail under the rear handle. The iron is about 2″ in width, and is about 3-11/16” in length. The plane features the simple dual adjusters for the iron, similar to the Stanley 151 spokeshave. They allow the iron to be adjusted laterally. The front knob and rear handle are a black plastic. Condition is very good, and the plane appears to have seen very little use. The bottom and sides still have the original machining marks, and are bright and clean with a few bits of faint patina (color) and some scratches mostly in the sole. The black finish or japanning is bright and shiny, and nearly all intact. The front knob and rear handle have some small scratches and scuffs. The iron still has most of its original lacquer finish other than near the sharp edge where it has been cleaned off. The cap is also bright and shiny, and the decal is intact. Except as noted, there are no cracks or chips or chunks missing from any of the castings, and everything operates properly. SHIPPING: 4 pounds when boxed, shipped USPS Ground Advantage, insurance is included. No International shipping. l sell what I enjoy, and I collect antique woodworking tools and I enjoy photography! The queue is overflowing with tools right now, as they seem to be finding me faster than I can list them. So please keep watching my postings as I have LOTS more to list!Searching my listings: I have lots to see! Some of you will undoubtedly enjoy browsing through everything, but if you want to hone in on something specific, I suggest you click on the “Visit Store” link in Seller Information section in the upper right of this listing. That will lead you to my extensive system of categories. How to subscribe to my eBay newsletter? Every Friday eBay sends out my newsletter featuring 10 of my most interesting new listings. To subscribe, click the VISIT STORE to go to my eBay store and then click on the heart symbol that is labeled SAVE SELLER. That will automatically get you on the mailing list for the newsletters. They are free, and you can unsubscribe at any time. ETHICS IN DESCRIPTIONS: I also buy for my collecting on eBay, and I have been burned too many times by misleading (duh did I forget to mention …….) descriptions, and auctions with pictures only of the left side because the right side was trashed. Life is much simpler for me if I disclose what I know or see about an item before you bid, and especially before you receive it in the mail. I come from the handshake school of doing business, and hopefully you are like me and understand what that means. What goes around, comes around.RETURN POLICY: I believe that if you give honest descriptions, and include enough pictures, you shouldn’t need a return policy. However, that doesn’t mean that I won’t make an occasional mistake. Please bid with the assurance that if I have made an error in my listing, I WILL take care of you. And if you have made an error, and bought the wrong size, for example, I will still take care of you (but I’ll let you pay the return shipping!).USPS POSTAGE RATE INCREASES: I use the Post Office for everything, and yes, the shipping charges just keep going up and up. The Post Office now has several prices increases during each year, raising a few things but not everything at each increase. And they now raise their rates during the Holidays, which means early October to late January. Their big increases are in January, timed to start at the end of the Holiday rates, and this year is no exception. And it’s not just the postage rates, the insurance charges and the delivery signature charges have also gone up. There is now a surcharge for Priority Mail packages over 20″ long, and another for Priority Mail packages over 30″ long, because those longer packages won’t fit in their automatic machines. And the Post Office has discontinued the Regional Flat Rate boxes, which were often less expensive for certain sizes and weights. I try to pick the best shipping option for each listing, based both on what is the least expensive and on what I think is needed to protect the item. If the value is $250 or over, eBay requires your signature at delivery for the buyer and seller protections to be in effect.SALES TAX: Interstate sales tax is now the reality on all the major selling websites including eBay. If I ship to a state where eBay is required to collect sales tax, eBay will charge you the sales tax for your location. There is lots of information available from eBay that explains it in much more detail. The sales tax is completely out of my hands — I don’t have anything to do with deciding whether to charge tax, I don’t have anything to do with deciding the tax rate, and I never see any of the funds that are collected, they go directly to eBay.SELLING OUTSIDE OF EBAY: Why would I risk my lengthy good standing with eBay to save you a couple of dollars? Especially when you ask on an email that is sent through the eBay email system? Please don’t ask, the answer is no.INTERNATIONAL SHIPPING: I no longer ship Internationally other than Canada. If you are in Canada, ask for what the shipping would cost, but be prepared for it to be $$$$$. AUCTIONS: I won’t end an auction listing early to sell it to you directly. As a bidder, I really dislike going back at the end of an auction to bid, only to discover that the seller had ended the auction early. So I won’t do that for you, or to you.PACKAGING: Please check my feedback — I package well. I figure if you take the time to purchase from me, then I can take the time to package it well, and not just throw it into a cereal box with a scrap of newspaper.I hope someday I will meet some of you as we trudge the happy road of tool collecting!
Nice Stanley SB 4 wood plane w/ dual blade adjusters made in England
Nice condition. G2
Vintage Stanley SB4 Woodworking Plane – Needs Some TLC
The Vintage Stanley SB4 Woodworking Plane is a collectable piece that needs some tender loving care. Made by the renowned brand Stanley in the United Kingdom, this smoothing plane is perfect for woodworking enthusiasts and collectors alike. Despite its vintage charm, this contemporary original plane is still a valuable addition to any carpentry or woodworking collection. Whether you’re looking to restore it to its former glory or simply appreciate its craftsmanship, this Stanley plane is sure to be a unique and functional piece for any woodworking enthusiast. It is in good condition in need of a sharpening.
3.2 Jersey (Warren?) Axe on White Ash
3.2 unmarked, possibly old paper label Jersey pattern axe. Clear and legible “3.2” under poll. Clean eye and good steel. Possibly Warren made, by the shape and eye characteristics. On 28” White Ash. Haft pattern copied from a vintage Saquatchie Indian Fire haft. Wedged with African Padauk and brass aesthetic. Any questions please send a message.
Warren script Undercutter/Chainsaw Axe on Smoked Hickory
Warren script stamp Undercutter/Chainsaw axe on 27” smoked Hickory, wedged with Wenge. Hand fit & hafted. Completely useable as a working axe if desired. Hickory haft was naturally smoked and oil burnished for a smooth feel; no stain on this timber. Head has natural patina with a clean eye. A used, however, nice example of an axe produced for only a few years. Any questions please send a message. Price includes shipping. Advertisement/information in last photo is not included in this listing.
showy 4-1/2″ try square w/ solid brass blade & crisp wood handle
The blade is solid brass, both trifoil escutcheons are brass, the face plate is brass, and the little escutcheon on the back side of the handle is brass. The only things attracted to a magnet are the rivets.
Stanley No 3 & 4 Through Type 11 Hand Plane Low Knob Template
Crosscut Saw Handles For J. Sells, Disston, Atkins, Simmonds, Loop Handles etc.
For saws that take a tapered handle we have an 11-3/4″ overall handle. The taper is 5-3/16″ long. at the top of the taper is 1-1/8″ while the small end is 15/16″. With a little fitting work this fine handle will get your old favorite up and going again.
Yamamoto Japanese Small Hand Plane Kanna 36mm Blue Steel #1 Souhou New
Model: Souhou – 双峰. Blacksmith: Yamamoto Kensuke – 山本健介. Blade width : 36mm / 1.4″. -Flattening of the body. [Set includes]. Condition:New. We are located in Japan.
Komori Japanese Smoothing Hand Plane Kanna 48mm Blue Steel #1 Unused
Blade width : Approx. Blade material : Blue Steel #1 / Aogami #1 – 青紙鋼一号. [Set includes]. Blades may be chipped.
Mizuno Seisuke Kanna Japanese Hand Plane 65mm Blue Steel Salvaged Bridge Iron
It is made from iron taken from an old iron bridge that withstood over 100 years of wind and weather before being dismantled. Type: Kanna (Japanese Hand Plane). Blade width: Approx. 65mm / 2.6 in. (100-year-old dismantled bridge).
Azuma Saburo Sunroku Roku Kanna Plane Used Slight Rust Ready to Use Now
Japanese iron hammer made by the famous blacksmith (Susa) 225g
Japanese Vintage Carpenter Tool Woodworking DIY Description Shipping costs can be reduced by bundling with other items.We also sell a variety of other items. Please check from See other items. Japanese iron hammer made by the famous blacksmith 須佐 (Susa ) 225g It is made of iron, but the surface is coated with copper.The hammers are engraved with dragons and tigers . (100g is about 0.22lbs / 1 inch is about 25.4mm)Weight / 225ghead length / 78mmcaliber / 21×24mmWe also have the following weights in stock, although the selling price will change.Please contact us if you wish to purchase. 225g.300g.375g.450g.570g.670g.750g we also sell a variety of other items. Please check from See other items.please check the image for the condition. If you have any questions, please ask before purchasing.ShippingBundled shipping and Post-purchase layaway Is possible.Please contact us after it makes a successful bid and before paying for the item.We will calculate the shipping fee and contact you. We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status. Depending on your location, a remote area pickup/delivery fee may be added.(especially in Canada and Australia).Please let us know your zip code before you buy. If you are concerned about this, please let us know your postal code before purchasing.About Importer’s ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding. Copyright (c) 2022 Fine Cycle LLC. All Rights Reserved.
Vintage E-Z Mark 4″ Butt Gauge McBurney Hollywood Door Hinge Gauge
The Vintage E-Z Mark 4″ Butt Gauge by McBurney is an original tool made in Hollywood, California This door hinge gauge is a collector’s item and a valuable addition to any woodworking enthusiast’s collection. With its brand reputation and unique design, this gauge is sure to be a treasured piece for those interested in carpentry and woodworking tools.
STRYI Soft V Parting Chisel 60 Degree 13mm 0.5″ Asymmetric Wood Carving Gouge
STRYI Profi Soft V-Parting Chisel 60° Degrees – 13mm (0.5″). For carvers seeking incredible flexibility and dynamic effects, theSTRYI Soft V-Parting Chisel (60 Degrees) is the perfect choice. Application: Expertly hand-honed and ready for both soft and hardwood.
Bent Gouges Set 3 pieces for Spoon &Bowl Carving, Gift for Men, STRYI Profi
Set of 3 Bent Gouges for Spoon & Bowl Carving – Deep Hollowing Precision Kit. ✔Large Bent Gouge – 30 mm (1.2 in). ✔Short Bent Gouge sweep #9 – 20 mm (0.8 in). ✔Long Bent Gouge sweep #7 – 20 mm (0.8 in).
Large chisel sweep 7, 30mm 1.2in, Heavy duty gouges STRYI Profi, Sculpture gouge
Upgrade your carving toolkit with the STRYI Large Sculpture Chisel (7 -profile heavy duty gouge ), purpose-built for shaping sculptures, smoothing wooden surfaces, and cleaning large background areas with precision.