Orig. 1 1/4″ Cutting Iron for “Keen Kutter” No. KK240 “Scrub” Plane-mjdtoolparts

An ORIGINAL 1 1/4″ WIDTH CUTTING IRON for a “Keen Kutter” No. 240 “scrub” plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This frequently missing, damaged or degraded cutting iron is marked at the top with the Keen Kutter logo and it retains its original convex form grinding on the leading edge. It is in excellent condition and could be put directly to use. Length = 6.25 Inches (Ref. Id No.: 451951) [Free Shipping]

Orig. 2″ Width Frog for Simmons “Keen Kutter” No. KK 4 or KK 5 – mjdtoolparts

An ORIGINAL FROG MECHANISM for an E.C. Simmons Keen Kutter KK 4 smooth plane or KK 5 jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. The KK designation planes were produced for Simmons by the Ohio Tool Company of Columbus, Ohio. This example is in clean, sound and ready to use condition, retaining some 85% of its original black japan finish. It could be put directly to use on an appropriate size plane. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 447888) [Free Shipping]

Orig. Iron for Keen Kutter No. KK 120 Lever Adjust Block Plane – mjdtoolparts

An ORIGINAL 1 5/8″ WIDTH CUTTING IRON for an E.C. Simmons “Keen Kutter” No. KK 120 lever-adjust block plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This iron, which would have been produced for Simmons by the Ohio Tool Company, is in essentially unused condition. It has a gear rack affixed to the rear of this top bevel grind iron to engage the depth of cut mechanism on the No. KK 120. Length = 5.00 Inches (Ref. Id No.: 379397) [Free Shipping]

Founder’s Grade “Keen Kutter” No. KK 78 Rabbet & Filletster Plane – mjdtoolparts

A FOUNDER’S GRADE “KEEN KUTTER” RABBET PLANE, No. KK 78, by the E.C. Simmons Hardware Company, St. Louis, Missouri. Fully 99% of the original black japan finish remains on this essentially unused example, which was produced for the E.C. Simmons Company by the Ohio Tool Company of Columbus, Ohio. It is complete with all original parts, including the depth stop, fixing screw, fence, rod and screw. The cutting iron is marked with the Keen Kutter logo. As good as they get. Length = 10.00 Inches (Ref. Id No.: 429172) [MediumFlatRate]

Orig. 1 3/4″ Plane Body for KK 3 Smoothing Plane- 75% Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons “Keen Kutter” No. KK 3 smoothing plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This body, which is designed for use with a cutting iron measuring 1 3/4 inches in width, retains approximately 75% of its original black japan finish. There is some very light pitting on the sole, but this body is otherwise in excellent condition and could be put directly to use. Length = 8.00 Inches (Ref. Id No.: 379152) [Free Shipping]

Orig. Plane Body for KK 5 1/2 Jack Plane- 2 1/4″ – 95% Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for “Keen Kutter” No. KK 5 1/2 heavy jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane body, which is designed for use with a cutting iron measuring 2 1/4″ in width, retains fully 95% of its original black japan finish. The plane, which is cast with the KK 5 1/2 number designation on the top of the toe, was produced for Simmons by the Ohio Tool Company. A great Instant Upgrade item. Length = 15.00 Inches (Ref. Id No.: 390073) [Free Shipping]

Orig. Frog Mechanism. for Keen Kutter KK 3 or KK 3 C Planes – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Keen Kutter No. KK 3 smoothing plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane component is in top condition and could be put to use replacing a damaged or degraded frog on a Keen Kutter 1 3/4 inch width smoothing plane. The original fixing screws and washers to secure the frog to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 455306) [Free Shipping]

Orig. Chip Brkr./Screw for E.C. Simmons KK4 and KK5 Planes – mjdtoolparts

An ORIGINAL CHIP BREAKER AND FIXING SCREW for a No. KK 4 “Keen Kutter” smooth plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This chip breaker, which was produced for Simmons by the Ohio Tool Company of Columbus, Ohio, includes the with original fixing screw to secure the chip breaker to the cutting iron. This two-inch width chip breaker will work with both the KK 4 and KK 5 planes as well as their corrugated sole equivalents. Length = 5.13 Inches (Ref. Id No.: 448738) [Free Shipping]

Orig. Plane Body for KK 4 Smooth Plane- Two Inch – 85% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons Keen Kutter No. KK 4 smooth plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane designed for use with a two inch width cutting iron. Approximately 85% of the original black japan finish remains. Length = 9.00 Inches (Ref. Id No.: 352536) [Free Shipping]

Orig. Plane Body for KK 4 Smoothing Plane-Two Inch – 90% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Keen Kutter KK 4 smoothing plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This body, which is designed for use with a two-inch width cutting iron, is in excellent condition, retaining a full 90% of its original black japan finish. Length = 9.00 Inches (Ref. Id No.: 343274) [Free Shipping]

Orig. Plane Body for KK 5 Jack Plane- Two Inch – 95% Japan Finish – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons Keen Kutter No. KK 5 jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. Fully 95 of the original black japan finish remains and this plane appears to have been very little used. It is absent any chips, cracks or other apologies and could be put directly to use. Length = 14.00 Inches (Ref. Id No.: 424496) [Free Shipping]

Orig. Plane Body for KK 5 1/2 Jack Plane- 2 1/4″ -Enhanced Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for “Keen Kutter” No. KK 5 1/2 C heavy jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane body, which is designed for use with a cutting iron measuring 2 1/4″ in width, has had its black japan finish “enhanced” by a previous owner. The plane, which is cast with the KK 5 1/2 number designation on the top of the toe, was produced for Simmons by the Ohio Tool Company. Length = 15.00 Inches (Ref. Id No.: 388126) [Free Shipping]

Orig. Cap for Keen Kutter KK 5 1/2 Plane – 2 1/4″ – Excellent – mjdtoolparts

An ORIGINAL LEVER CAP for for an E.C. Simmons “Keen Kutter” No. KK 5 1/2 or KK 5 1/2 C heavy jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This chip breaker, which is designed for use with a cutting iron measuring 2 1/4″ in width, is in excellent condition, noting some very minor roughage to the leading edge, and could be put directly to use. Length = 5.25 Inches (Ref. Id No.: 390069) [Free Shipping]

Orig. Beech Handle & Front Knob for Keen Kutter KK 31 Plane – mjdtoolparts

An ORIGINAL BEECH FRONT KNOB AND REAR HANDLE for an E.C. Simmons “Keen Kutter” No. KK 31 transitional jointer plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. These handles, which were included on the planes produced for Simmons by the Ohio Tool Company, are in super condition, and could be put directly to use restoring a an early type Keen Kutter fore or jointer plane. The original screws to secure the handle and knob to the plane body are included as well. Length = 4.50 Inches (Ref. Id No.: 401643) [Free Shipping]

Orig. Later Type Body for Keen Kutter No. K 5 Plane – 95% – mjdtoolparts

An ORIGINAL LATER TYPE CAST IRON PLANE BODY for a “Keen Kuter” No. K 5 jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This body was produced for Simmons by Stanley. However, unlike the earlier versions of the No. K 5, this plane does not have the “Bedrock” type frog and it was not produced with a provision for a frog adjusting screw. It is in top condition, retaining fully 95% of its original black japan finish. Length = 14.00 Inches (Ref. Id No.: 386429) [Free Shipping]

Orig. Frog Mechanism – Keen Kutter KK 8 or 8 C Planes- 2 5/8 Inch – mjdtoolparts

An ORIGINAL FROG MECHANISM for an E.C. Simmons Keen Kutter No. KK8 or KK 8 C jointer plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This frog, which is designed to accomodate a 2 5/8 inch width cutting iron, is in excellent condition and could be put directly to use. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 467824) [Free Shipping]

Orig. Plane Body for KK 5 C Jack Plane- Two Inch – 90% Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons Keen Kutter No. KK 5 C jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. Fully 95 of the original black japan finish remains and this plane appears to have been very little used. It is absent any chips, cracks or other apologies and could be put directly to use. Length = 14.00 Inches (Ref. Id No.: 448741) [Free Shipping]

Orig Frog Mechanism for Keen Kutter KK 5 1/2 Plane – 2 1/4 Inch – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Keen Kutter KK 5 1/2 or KK 5 1/2 C bench plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This 2 1/4 inch width frog is complete with its original fixing screws to secure the frog to the plane body and it is in excellent working condition. Length = 7.00 Inches (Ref. Id No.: 390071) [Free Shipping]

Orig. Cutting Iron & Chip Breaker for Oak Leaf No. 4 or 5 Plane – mjdtoolparts

An ORIGINAL OAK LEAF BRAND TWO INCH WIDTH CUTTING IRON AND CHIP BREAKER for a Oak Leaf brand No. 4 or No. 5 size bench planes by the E.C. Simmons Hardware Company, St. Louis, Missouri. This tapered cutter would have been produced for Simmons by the Ohio Tool Company and the blade has a tapered profile to the body. Length = 7.25 Inches (Ref. Id No.: 343058) [Free Shipping]

Orig. Nicker Spur/Screw for Simmons K190, K190, K192 Planes – mjdtoolparts

An ORIGINAL THREE-PRONG NICKER SPUR AND FIXING SCREW for an E.C. Simmons “Keen Kutter” No. K190, K191 K192 or K 78 rabbet plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This frequently missing, damaged or degraded plane component is in excellent condition and could be put directly to use. Length = 0.88 Inches (Ref. Id No.: 405841) [Free Shipping]

Orig. 2 3/8″ “Oak Leaf” Brand Iron for No. 28 Transitional Plane – mjdtoolparts

An ORIGINAL 2 3/8″ WIDTH CUTTING IRON for an E.C. Simmons “Oak Leaf” brand transitional plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This “Oak Leaf” brand iron will work with Oak Leaf transitional planes Nos. E28 , E29 , E30 and E31. It is in excellent condition and could be put directly to use. Length = 8.00 Inches (Ref. Id No.: 415559) [Free Shipping]