Founder’s Grade 1 1/2″ Iron/Chip Breaker – Berg “Shark” – Unused- mjdtoolparts

A FOUNDER’S GRADE 1 1/2″ WIDTH TAPERED CUTTING IRON, CHIP BREAKER AND FIXING SCREW by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron and chip breaker, which were rescued from a Connecticut hardware store many years ago are in unused condition and could be put directly to use. The cutting iron is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock tapered cutting iron, is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 7.88 Inches (Ref. Id No.: 386122) [Free Shipping]

Orig. 1 3/8″ Width Cutting for Stanley No. 60 or 60 1/2 -Berg Shark-mjdtoolparts

A FOUNDER’S GRADE 1 3/8″ WIDTH “SHARK” BRAND CUTTING IRON for a Stanley No. 60, 60 1/2 or 203 plane by Erik Berg, Eskilstuna, Sweden. The milled grooves on the underside are designed to match the depth of cut adjustment for the Stanley No. 60 1/2 on this pristine high quality cutting iron. As good as they get. Length = 4.25 Inches (Ref. Id No.: 386139) [Free Shipping]

Extra Clean E.A. Berg Shark Brand 3/4″ Plow Plane Cutting Iron – mjdtoolparts

A rare and exceptionally well preserved 3/4″ WIDTH PLOW PLANE CUTTING IRON by Erik Anton Berg, Eskilstuna, Sweden. This extra clean and ready to use iron is marked with Berg name at the top of the bit. It is in excellent condition and could be put directly to use. Length = 8.88 Inches (Ref. Id No.: 399116) [Free Shipping]

Original Chip Breaker for Erik Anton Berg 1 3/4″ Plane Iron – mjdtoolparts

An ORIGINAL 1 3/4″ CHIP BREAKER AND FIXING SCREW for a wooden plane iron by Erik Anton Berg, Eskilstuna, Sweden. This pristine cap is marked with Berg’s distinctive shark logo as well as a number of circular symbols that may represent awards won at trade exhibitions. It is in essentially unused condition and could be put directly to use. Length = 4.38 Inches (Ref. Id No.: 464265) [Free Shipping]

E.A. Berg, Sweden 1 5/8 Inch Blade – For No. 2 Size – Excellent – mjdtoolparts

An ORIGINAL 1 5/8″ WIDTH CUTTING IRON by Erik Berg, Eskilstuna, Sweden. This cutting iron from a highly respected Swedish maker is in essentially unused condition. It will fit the Stanley No. 2 size planes as well as similarly configured No. 2 size planes by other makers. Length = 7.00 Inches (Ref. Id No.: 326932) [Free Shipping]

Founder’s Grade 1 1/2″ Parallel Cutting Iron- Berg “Shark”- Unused- mjdtoolparts

A FOUNDER’S GRADE 1 1/2″ WIDTH PARALLEL CUTTING IRON by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron, which was rescued from a Connecticut hardware store many years ago is in unused condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock parallel cutting iron, which measures a uniform 5/32″ in thickness, is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 7.25 Inches (Ref. Id No.: 386125) [Free Shipping]

E.A. Berg, Sweden 2 1/4″ Parallel Cutting Iron – 5/32″ Thickness – mjdtoolparts

A FOUNDER’S GRADE 2 1/4″ WIDTH PARALLEL CUTTING IRON by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron, which was rescued from a Connecticut hardware store many years ago is in unused condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock parallel cutting iron, which measures a uniform 5/32″ in thickness, is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 8.25 Inches (Ref. Id No.: 456364) [Free Shipping]

Orig. Two inch Cutting for Stanley No. 4 or 5- E.A. Berg Shark- mjdtoolparts

A TWO-INCH WIDTH SHARK BRAND CUTTING IRON, by Erik Anton Berg, Eskilstuna, Sweden. This plane iron was designed to fit the Stanley No. 4 or 5 planes or planes by other makers that have a two-inch width iron. This example is marked with the Shark logo and it is in top condition. Ready to use. Length = 7.00 Inches (Ref. Id No.: 340968) [Free Shipping]

Orig. E.A. Berg 1 3/4″ “Shark” Iron/Chip Brkr. for Stanley No. 3 – mjdtoolparts

A FOUNDER’S GRADE 1 3/4″ WIDTH PARALLEL CUTTING IRON AND CHIP BREAKER that will fit a Stanley No. 3 or 603 smooth plane by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron, which was rescued from a Connecticut hardware store many years ago is in unused condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock parallel cutting iron, which measures a uniform 5/32″ in thickness , is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 7.38 Inches (Ref. Id No.: 386130) [Free Shipping]

Orig. 1 3/4″ Width Cutting for Stanley No. 3/5 1/4- E.A. Berg Shark-mjdtoolparts

An ORIGINAL1 3/4″ WIDTH PARALLEL CUTTING IRON by Erik Anton Berg, Eskilstuna, Sweden. This clean and very well preserved cutting iron is in excellent condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This parallel cutting iron, which measures a uniform 5/32″ in thickness, is in excellent working condition and could be put directly to use in an appropriate size plane or if you are making your own plane. Length = 7.25 Inches (Ref. Id No.: 394552) [Free Shipping]

Extra Clean 2 1/4 Inch Toothing Cutting Iron – E.A. Berg Shark – mjdtoolparts

An ESSENTIALLY UNUSED 2 1/4 INCH WIDTH TOOTHING CUTTING IRON, by Erik Anton Berg, Eskilstuna, Sweden. This Shark Brand cutter has been boldly struck with the imprint of this highly respected Swedish toolmaker. An uncommon Berg cutting iron in top working condition. Length = 7.00 Inches (Ref. Id No.: 360881) [Free Shipping]

Founder’s Grade E.A. Berg Iron for No. 8/608 Planes – 3/16″ Thick – mjdtoolparts

A FOUNDER’S GRADE 2 5/8″ WIDTH PARALLEL CUTTING IRON that will fit a Stanley No. 8, 8 C, 608, 608 C and transitional planes No. 32, 33 and 34 by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron, which was rescued from a hardware store many years ago is in unused condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock parallel cutting iron, which measures a uniform 3/16″ in thickness, is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 8.75 Inches (Ref. Id No.: 443419) [Free Shipping]

Original Chip Breaker for E.A. Berg 1 15/16 Inch Plane Iron – mjdtoolparts

An ORIGINAL 1 15/16 INCH WIDTH CHIP BREAKER by Erik Berg, Eskilstuna, Sweden. This extra clean chip breaker, which was designed for use with a two-inch width cutting iron, is marked with the Berg imprint and the distinctive shark logo. It is in excellent condition and could be put directly to use. The original screw to secure the chip breaker to the plane iron is included as well. Length = 4.38 Inches (Ref. Id No.: 379488) [Free Shipping]

Founder’s Grade 1 1/4″ Cutting Iron – Berg “Shark” – Unused- mjdtoolparts

A FOUNDER’S GRADE 1 1/4″ WIDTH PARALLEL CUTTING IRON by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron, which was rescued from a Connecticut hardware store many years ago is in unused condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock parallel cutting iron, which measures a uniform 5/32″ in thickness, is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 8.00 Inches (Ref. Id No.: 386133) [Free Shipping]

Orig. 1 3/4″ Width Cutting for Stanley No. 3 or 603 E.A. Berg Shark-mjdtoolparts

A FOUNDER’S GRADE 1 3/4″ WIDTH PARALLEL CUTTING IRON by Erik Anton Berg, Eskilstuna, Sweden. This old hardware stock iron, which was rescued from a Connecticut hardware store many years ago is in unused condition and could be put directly to use. It is marked at the top with the maker name and the distinctive “shark” logo used by this highly respected edge tool maker. This old hardware stock parallel cutting iron, which measures a uniform 5/32″ in thickness, is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. As good as they get. Length = 7.38 Inches (Ref. Id No.: 386112) [Free Shipping]