An ORIGINAL CAST IRON PLANE BODY AND FRONT KNOB for a Fulton No. 227 double end block plane by the Fulton Tool Company, New York, New York. Fully 90% of the original paint remains on this plane, which is absent any chips, cracks or other apologies. The body was produced for Fulton by Sargent & Company of New Haven, Connecticut and the body is identical to the Sargent No. 227 double end block plane. Length = 8.00 Inches (Ref. Id No.: 406146) [Free Shipping]
Archives
Orig. 2″ Width Cutting Iron for Fulton No. 4 or 5 Size Plane – mjdtoolparts
a TWO INCH WIDTH FULTON BRAND CUTTING IRON for a No. 4 or No. 5 size plane by the Fulton Tool Company, New York, New York. This blade, which will also work in Stanley planes No. 4 and No. 5, is in clean, sound and ready to use condition. Length = 7.25 Inches (Ref. Id No.: 434407) [Free Shipping]
Orig. Mahogany Handle & Knob for Sargent 8 Inch No. 409 Plane – mjdtoolparts
An ORIGINAL STAINED HARDWOOD FRONT AND REAR HANDLE for a Fulton No. 409 nine-inch length smoothing planeby the Fulton Tool Company, New York, New York. The rear handle retains its original Fulton decal and both the handle and knob are in top condition. The original screws to secure the handle and knob to the plane body are included as well. Length = 4.38 Inches (Ref. Id No.: 422329) [Free Shipping]
Orig. Body & Frog for Fulton No. 409 9″ Smooth Plane – 95% Paint – mjdtoolparts
An ORIGINAL CAST IRON PLANE BODY AND FROG MECHANISM for a Fulton No. 3409 smoothing plane by the Fulton Tool Company, New York, New York. Fully 95% of the original black japan finish remains on this uncommon “No. 3” size plane. Length = 8.25 Inches (Ref. Id No.: 422332) [Free Shipping]
Orig. Handle & Front Knob for Fulton No. 35 Transitional Plane – mjdtoolparts
An ORIGINAL STAINED HARDWOOD REAR HANDLE AND FRONT KNOB for “No. 3” smoothing size plane by the Fulton Tool Company, New York, New York with original screws. Part of the original decal remains on the handle of this working pair. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 446841) [Free Shipping]
Orig. Handle for Fulton No. 3709 (No. 3) Plane – Orig. Decal- mjdtoolparts
An ORIGINAL REAR HANDLE for a Fulton No. 3 size 9″ length smoothing plane by the Fulton Tool Company, New York, New York. Fully 98% of the original lacquer finish remains on this plane, which retains its full, original Fulton decal on the handle. The original threaded rod and brass nut to secure the handle to the plane body are included as well. Length = 4.50 Inches (Ref. Id No.: 379111) [Free Shipping]
Orig. Pasteboard Box for Fulton No. 5329 Combination Plane – mjdtoolparts
An ORIGINAL PASTEBOARD BOX for a Fulton No. 5329 combination plane by the Fulton Tool Company, New York, New York. This box has four sound corners on the upper and lower sections and it stands ready to provide a dust-free storage location for a Fulton No. 5329 combination plane. Length = 12.00 Inches (Ref. Id No.: 475207) [Free Shipping]
Orig. Plane Body for Fulton No. 3 Size 9″ Plane – 98% Japan – mjdtoolparts
An ORIGINAL CAST IRON PLANE BODY for a Fulton No. 3709 nine-inch length smooth plane by the Fulton Tool Company, New York, New York. Fully 98% of the original black japan finish remains on this body, which was produced for Fulton by Sargent & Company of New Haven, Connecticut. Length = 9.25 Inches (Ref. Id No.: 368429) [Free Shipping]
Original Cutting Iron for Fulton No. 6 or 7 Size Plane – 2 3/8″ – mjdtoolparts
An ORIGINAL 2 3/8″ WIDTH CUTTING IRON for a Fulton No. 6 or No. 7 size bench plane by the Fulton Tool Company, New York, New York. This cutter, which is marked at the top with the “Fulton” name, is in excellent condition and could be put directly to use. Length = 7.75 Inches (Ref. Id No.: 467323) [Free Shipping]