Orig. Crank Handle & Screw for Goodell-Pratt No. 1515 Hand Drill – mjdtoolparts

An ORIGINAL CRANK HANDLE AND FIXING SCREW for a Goodell-Pratt No. 1515 hand drill by the Goodell-Pratt Company, Greenfield, Massachusetts. The original screw to secure the handle to the gear wheel on the Goodell-Pratt No. 1515 aluminum body hand drill is included as well. Length = 2.00 Inches (Ref. Id No.: 384590) [Free Shipping]

Orig. Body, Shaft & Gears for Goodell-Pratt No. 56 Breast Drill- mjdtoolparts

An ORIGINAL BREAST DRILL BODY, SHAFT AND AUXILIARY SIDE HANDLE for a Goodell-Pratt No. 56 breast drill by the Goodell-Pratt Company, Greenfield, Massachusetts. This ready to use drill component retains its original dual gears and could be put directly to use restoring a No. 56 breast drill having damaged gears or a bent shaft. Length = 13.00 Inches (Ref. Id No.: 452897) [Free Shipping]

Orig. Handle/Gear Wheel for Goodell-Pratt No. 20 Breast Drill – mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Goodell-Pratt No. 20 breast drill by the Goodell-Pratt Company, Greenfield, Massachusetts. Much of the original red japan finish remains on this gear wheel, but has been obscured by a buildup of grime. This gear wheel is attached to the body of the drill by a spring mechanism that allows a fitting to engage the recess in the shaft to hold it in place. Length = 2.00 Inches (Ref. Id No.: 457281) [Free Shipping]

Orig. Breast Pad & Screw for Goodell-Pratt No. 245 Breast Drill- mjdtoolparts

An ORIGINAL CAST IRON BREAST PAD for a Goodell-Pratt No. 245 breast drill by the Goodell Pratt Company, Greenfield, Massachusetts. This frequently damaged, degraded or missing drill component retains its original fixing screw to secure the head to the drill body. Approximately 90% of the original black japan finish remains. Length = 4.88 Inches (Ref. Id No.: 462821) [Free Shipping]

Orig. 3 Jaw Chuck for Goodell-Pratt No. 245 Breast Drill – Screw – mjdtoolparts

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Goodell-Pratt No. 245 breast drill by the Goodell-Pratt Company, Greenfield, Massachusetts. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Goodell-Pratt No. 245 breast drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 2.50 Inches (Ref. Id No.: 462819) [Free Shipping]

Orig. Gear Wheel/Crank Hdl. for Goodell-Pratt No. 245 Breast Drill- mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Goodell-Pratt No. 245 breast drill by the Goodell-Pratt Company, Greenfield, Massachusetts. Most of the original Goodell-Pratt decal remains on this gear wheel. The original screw to secure the crank handle to the body of the drill is included as well. Goodell-Pratt drills had their gear wheel secured to the drill body by a screw in the main frame of the drill that fits into a recess on the shaft. Length = 2.00 Inches (Ref. Id No.: 403904) [Free Shipping]

Orig. Handle/Gear Wheel for Goodell-Pratt No. 245 Breast Drill – mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Goodell-Pratt No. 245 breast drill by the Goodell-Pratt Company, Greenfield, Massachusetts. Most of the original Goodell-Pratt decal remains on this gear wheel. Goodell-Pratt drills had their gear wheel secured to the drill body by a screw in the main frame of the drill that fits into a recess on the shaft. Length = 2.00 Inches (Ref. Id No.: 449541) [Free Shipping]

Orig. Gear Guard/Screw for Goodell-Pratt No. 245 Breast Drill – mjdtoolparts

An ORIGINAL GEAR GUARD PLATE for a Goodell-Pratt No. 245 breast drill by the Goodell Pratt Company, Greenfield, Massachusetts. Drills by the Millers Falls Company were secured to the body using a screw through the center of the gear wheel that connected to the drill body. Goodell-Pratt drills had a shaft with a recessed end that inserted in an opening in the body. A screw from the frame would secure the gear wheel in the body and this guard plate would ensure that the wheel was properly aligned. The original screw to secure the guard plate to the body is included as well. Length = 0.38 Inches (Ref. Id No.: 403910) [Free Shipping]

Orig. Side Handle for Goodell-Pratt No. 245 Breast Drill – mjdtoolparts

An ORIGINAL AUXILIARY SIDE HANDLE for a Millers Falls No. 245 breast drill by the Goodell Pratt Company, Greenfield, Massachusetts. This frequently missing, damaged or degraded stained hardwood handle is in excellent condition and could be put directly to use. Length = 4.25 Inches (Ref. Id No.: 462820) [Free Shipping]

Orig. 3 Jaw Chuck for Goodell-Pratt No. 05 Hand Drill – Excellent – mjdtoolparts

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Goodell-Pratt No. 05 hand drill by the Goodell-Pratt Company, Greenfield, Massachusetts. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Goodell-Pratt No. 05 hand drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 2.00 Inches (Ref. Id No.: 462813) [Free Shipping]

Orig. Body, Shaft & Gears for Goodell-Pratt No. 246 Breast Drill- mjdtoolparts

An ORIGINAL CAST IRON BODY, SHAFT AND GEARING MECHANISM for a Goodell-Pratt No. 246 breast drill by the Goodell Pratt Company, Greenfield, Massachusetts. This body, which retains nealy all of its original black japan finish, has the spring lock mechanism for the gear wheel. The dual original gears are in excellent condition. If you have a Goodell-Pratt No. 246 breast drill having a damaged or degraded body or drive mechanism, this extra clean body will put you directly back in business. Length = 15.00 Inches (Ref. Id No.: 457297) [Free Shipping]

Org. Gear Wheel/Crank Hdl. for Goodell-Pratt No. 5 1/2B Hand Drill- mjdtoolparts

An ORIGINAL GEAR WHEEL AND CRANK HANDLE for a Goodell-Pratt No. 5 1/2 B hand drill by the Goodell-Pratt Company, Greenfield, Massachusetts. This early drill component retains its original turned cocobolo knob. Approximately 90% of the original red japan finish remains. This gear wheel assembly is secured to the drill body by a small screw in the casting that fits in the milled slot on the central shaft of the gear wheel. Length = 6.00 Inches (Ref. Id No.: 456340) [Free Shipping]

Orig. Gear Wheel Fixing Screw for Goodell-Pratt No. 5 1/2 Drill – mjdtoolparts

An ORIGINAL DRIVE GEAR FIXING SCREW for a Goodell-Pratt hand drill by the Goodell-Pratt Company, Greenfield, Massachusetts. The gear wheel for early Goodell-Pratt drills has a milled recess in the shaft that fits into the body of the drill. This screw is designed to pass through a threaded hole in the drill body and fit in the slot to hold the gear wheel precisely in place. This screw came from a Goodell-Pratt No. 5 1/2 hand drill, but it should work for other Goodell-Pratt drills that use the same fixing mechanism to hold the gear wheel in place. Length = 0.25 Inches (Ref. Id No.: 457163) [Free Shipping]

Orig. Gear Guard & Screw for Goodell-Pratt No. 1515 Hand Drill – mjdtoolparts

An ORIGINAL GEAR GUARD PLATE for a Goodell-Pratt No. 1515 hand drill by the Goodell Pratt Company, Greenfield, Massachusetts. Drills by the Millers Falls Company were secured to the body using a screw through the body. Goodell-Pratt drills had a shaft with a recessed end that inserted in an opening in the body. A screw from the frame would secure the gear wheel in the body and this guard plate would ensure that the wheel was properly aligned. The original screw to secure the guard plate to the body is included as well. Length = 0.38 Inches (Ref. Id No.: 462826) [Free Shipping]

Orig. Three Jaw Chuck for Goodell-Pratt No. 49 Hand Drill – mjdtoolparts

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Goodell-Pratt No. 49 hand drill by the Goodell-Pratt Company, Greenfield, Massachusetts. This chuck retains its original springs and jaws and it is in excellent working condition. If you have a Goodell-Pratt No. 49 drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 1.50 Inches (Ref. Id No.: 452835) [Free Shipping]

Orig. Goodell-Pratt Co. General Line Catalog No. 10- 304 Pgs – mjdtoolparts

An ORIGINAL GENERAL LINE CATALOGUE OF TOOLS, No. 10, by the Goodell-Pratt Company, Greenfield, Massachusetts. This 1911 Edition of 304 pages measures 5 5/8″ tall by 3 3/4″ in width. It illustrates and describes the full and expanding line of tools then being offered by this innovative Connecticut Valley manufacturer. Length = 5.50 Inches (Ref. Id No.: 123575) [Free Shipping]

Orig. Goodell-Pratt Co. General Line Catalogue, No. 15 – 1922 Ed. – mjdtoolparts

An ORIGINAL GENERAL LINE CATALOGUE, No. 15, by the Goodell-Pratt Company, Greenfield, Massachusetts. This 1922 edition of 448 pages illustrates the full Goodell-Pratt product line as it then existed. A wide range of specialized tools that were produced to the highest levels of quality are included in this immediate post-World War I book, which has a torn coveer, but is otherwise in excellent condition. Length = 5.75 Inches (Ref. Id No.: 447689) [Free Shipping]

Orig. Goodell-Pratt Co. 1926 Catalogue of Tools – 400 Pages – mjdtoolparts

An ORIGINAL GENERAL LINE CATALOGUE, No. 16, by the Goodell-Pratt Company, Greenfield, Massachusetts. This 1926 Edition of 400 pages illustrates the full Goodell-Pratt product line as it then existed. A wide range of specialized tools that were produced to the highest levels of quality are included in this great immediate pre-Roosevelt Depression book. Length = 5.75 Inches (Ref. Id No.: 380237) [Free Shipping]

Orig. Goodell-Pratt Co. 1924 Catalogue of Tools – 462 Pages – mjdtoolparts

A GENERAL LINE GOODELL-PRATT “POCKET” CATALOGUE OF TOOLS, No. 14, by the Goodell-Pratt Company, Greenfield, Massachusetts. This ca. 1920Edition of 462 pages documents the full and extensive line of tools offered by this prominent early Twentieth Century maker. A wide range of innovative and arfully finished tools, including drills, braces, levels, machinists’ tools and more are illustrated and described in this 5 5/8″ tall by 3 3/4″ wide volume, which is in excellent collector quality condition. Length = 5.50 Inches (Ref. Id No.: 123607) [Free Shipping]

Orig. 460 Page 1917 Goodell-Pratt Co. Catalogue of Tools – mjdtoolparts

A GENERAL LINE GOODELL-PRATT “POCKET” CATALOGUE OF TOOLS, No. 13, by the Goodell-Pratt Company, Greenfield, Massachusetts. This ca. 1917 Edition of 460 pages documents the full and extensive line of tools offered by this prominent early Twentieth Century maker. A wide range of innovative and arfully finished tools, including drills, braces, levels, machinists’ tools and more are illustrated and described in this 5 1/2″ tall by 4 1/4″ wide volume, which has only a few small folds in the cover to note as an apology. Length = 5.50 Inches (Ref. Id No.: 473312) [Free Shipping]