Archives

An ORIGINAL HINGED OAK STORAGE BOX for Irwin spiral twist auger bits by the Irwin Auger Bit Company, Wilmington, Ohio. The original spring clips to hold the bits are present and in perfect original condition. Each of the clips is marked with the diameter of the bit. The original paper label remains on the outside of this extra clean and well preserved box. Length = 10.38 Inches (Ref. Id No.: 470659) [Free Shipping]

A FOUNDER’S GRADE STANLEY “RUSSELL JENNINGS” BRAND 13/16″ SIZE SPIRAL TWIST AUGER BIT by STANLEY. This auger is in original unused, hardware store condition. It is marked on the shaft with the designation “13/16” and the “Russell Jennings” name. As good as they get. Length = 9.75 Inches (Ref. Id No.: 440007) [Free Shipping]

An EXTRA CLEAN 5/16″ DIAMETER, 18″ LENGTH, SHIP TYPE AUGER BIT by the Snell Manufacturing Company, Fiskdale, Massachusetts. This bit has a small lead screw and is without spurs on the outside of the leading face. It has a tapered shank designed to accommodate the jaws of a ratchet bit brace. This essentially unused condition auger bit could be put directly to use. Length = 22.50 Inches (Ref. Id No.: 397953) [Free Shipping]

An EXTRA CLEAN 3/8″ LONG DOUBLE SPUR AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This 18″ length bit has dual lead spurs and it is in excellent working condition. Ready to use. Length = 18.00 Inches (Ref. Id No.: 397952) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 11/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “11” for 11/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 406794) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 7/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “7” for 7/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 436578) [Free Shipping]

A FOUNDER’S GRADE 5/8″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “10” for 10/16 of an inch. It is in unused condition and could be put diretly to use. As good as they get. Length = 9.50 Inches (Ref. Id No.: 470653) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 15/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “15” for 15/16 of an inch. Length = 9.25 Inches (Ref. Id No.: 440005) [Free Shipping]

SIX ORIGINAL BOXES FOR SPIRAL AUGER BITS, all by the Irwin Auger Bit Company, Wilmington, Ohio. Boxes for bits numbered 5 (5/16″), 6 (3/8″), 7 (7/16″) , 8 (1/2″) , 11 (11/16″) and 14 (7/8″). All are in excellent condition. Length = 8.50 Inches (Ref. Id No.: 406801) [Free Shipping]

A FOUNDER’S GRADE 1/2″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “8” for 8/16 of an inch. It is in unused condition and could be put diretly to use. As good as they get. Length = 9.50 Inches (Ref. Id No.: 425260) [Free Shipping]

A FOUNDER’S GRADE 7/8″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “14” for 14/16 of an inch. It is in unused condition and could be put diretly to use. As good as they get. Length = 9.75 Inches (Ref. Id No.: 406785) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 13/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “13” for 13/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 436575) [Free Shipping]

A FOUNDER’S GRADE 5/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “5” for 5/16 of an inch. It is in unused condition and could be put diretly to use. As good as they get. Length = 8.25 Inches (Ref. Id No.: 470646) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 5/8″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “10” for 10/16″. Length = 8.50 Inches (Ref. Id No.: 419134) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 5/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “5” for 5/16 of an inch. Length = 6.50 Inches (Ref. Id No.: 436571) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 1/4″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “4” for 4/16 of an inch. Length = 6.50 Inches (Ref. Id No.: 419140) [Free Shipping]

A FOUNDER’S GRADE 1/2″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “8” for 8/16 of an inch. It is in unused condition and could be put diretly to use. As good as they get. Length = 8.25 Inches (Ref. Id No.: 419710) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 7/8″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “14” for 14/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 464535) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 3/8″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “6” for 6/16 of an inch. Length = 8.00 Inches (Ref. Id No.: 413540) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 3/4″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “12” for 12/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 436576) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 9/16″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “9” for 9/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 413537) [Free Shipping]

An ORIGINAL AND EXTRA CLEAN 1/2″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “8” for 8/16 of an inch. Length = 8.50 Inches (Ref. Id No.: 399095) [Free Shipping]

A FOUNDER’S GRADE 7/8″ SIZE DOUBLE SPUR SPIRAL AUGER BIT, No. 14, by the Russell Jennings Manufacturing Company, Chester, Connecticut. This pristine bit is marked on the lower shaft with the “Russell Jennings” designation and with the number “14” imprinted on the tang. Factory new. As good as they get. Length = 9.75 Inches (Ref. Id No.: 474415) [Free Shipping]

A FOUNDER’S GRADE 3/4″ SIZE DOUBLE SPUR TWIST AUGER BIT by the Irwin Auger Bit Company, Wilmington, Ohio. This tapered shank bit, which is designed for use in a bit brace, is marked with the maker name and working location on the shaft. The tapered tang is marked with the designation “12” for 12/16 of an inch. This bit retains its original protective soft red plastic cover and it is in unused, original factory condition. As good as they get. Length = 8.50 Inches (Ref. Id No.: 406920) [Free Shipping]