This Kennedy tool box has a few dings on the front right side making it a little difficult to latch. Otherwise in good condition.
Archives
Vintage KENNEDY Steel Toolbox USA QUALITY Great Condition All three latches work
The latches do work. This piece is in “as found” condition.
Vintage Kennedy Tool Chest Tool box Top 1 Key Handle Latch Cover
Vintage Kennedy Tool Chest Tool box Top 1 Key Handle Latch Cover
Vintage USA – Kennedy Kits Mechanics Lift Top Toolbox 3-Drawer Chest 40’s-50’s ?
Vintage Rare Kennedy Kits Mechanic’s Chest, Dual Hinged Lift Top with 3 Drawers, Heavy Duty Side Handles, Lock Latch, and Lock Bar. Made in the U.S.A. in the 40’s-50’s ? and made to last, probably good for another 50 years or so. Measures approximately 27 inches long x 12 5/8 inches wide x 15 1/4 inches high. Comes repainted with dents, dings, and missing paint as pictured and as is. Also has nine drill holes on the bottom where the former owner attached another tool cabinet. This is the perfect restoration project for the person with the skill and time or you can clean it up and oil it and put it in your vintage garage or workshop. Please see photos for condition. Drawer 1 3/4″ deep. Drawer 2 1/4″ deep with socket section. Drawer 3 1/2″ deep with corrugated bottom. Lift Top 3 3/4″ deep with 3 compartments. SECT. #1L
Vintage Kennedy Brown Metal CS-19 Cantilever Tray & Latch Mechanics Tool Box
Vintage Brown Metal Tool Box by Kennedy, Van Wert, Ohio, model CS-19 Cantilever Tray & Latch Mechanics Box. This nice Kennedy CS-19 Toolbox measures approximately 19”x7″x7″, good overall condition, has some wear for a tool box of its age, some corrosion as seen in the pictures. Take a look at the pictures, what you see is what you get!!! Thanks!!
Vintage Heavy Duty Kennedy Folding Toolbox Model 1022
Vintage Heavy Duty Kennedy Folding Toolbox Model 1022. Has some obvious wear, no structural damage, surface rust. Trays fold out great, latches all work great, handle excellent, a very solid toolbox-seems to have a reinforced bottom. Sold as is, see photos for details. Shipped mostly through USPS, seller reserves the right to use similar FedEx or UPS service to stay within eBay estimated shipping cost unless expressly declined by buyer and international through eBay International Shipping. Will combine postage-add to cart and request invoice/total before paying.
Vintage Red Kennedy Brand Toolbox with Single Latch and Heavy-Duty Handle
This red Kennedy toolbox is in excellent condition and ready to be used. It is heavy duty and can hold up to any kind of shop use. Dimensions: 18.75” x 7” x 7.5” Tall We have 18 additional Kennedy toolboxes like this one available. Please contact us if you’re looking for more! Please contact us if you have any questions regarding item condition, shipping, or our shop! 24
Vintage Kennedy Cantilever 2 Tier Metal Tool Box Chest Single Latch 16x9x12″
Actual colors may vary due to screen differenciations.
Kennedy 220-426738. Two Drawer Tool Box
Kennedy two drawer tool box. Inside is very clean and has mostly intact paint. The outside has most of the original paint but many spots of rust. The integrity of the metal is intact. No key The drawers latch shut when the toolbox is closed. Handle is intact. Latches are rusted but work appropriately
Vtg. Kennedy Kits 3 Latch Cantilever Tool/Tackle/Machinist Box Style #1018 USA
All work as they should. Handle is cushioned vinyl with steel core for comfortable sturdy grip. 18″ long, 10″ wide (front to back), 12″ tall (from bottom to peak of top).
Vintage Kennedy KK-19 Red Machinist Tool Box w Tray USA
Made in USA. The red finish shows scratches, scuffs, paint wear, stains, small dings, and surface marks throughout. The latch, hinge, and handle are present. The inside is solid and includes the removable tray.
Vintage Kennedy Metal Tool Box/Chest Single Latch 16-1/2 x10x10.5” (161-EW)
Vintage Kennedy Metal Tool Box/Chest Single Latch 16-1/2″ long x 10″ wide x 10.5” TallVery good condition – original gray/green exterior paint has a paint drip on top & front & many spec paint spatters Good interior brown/copper paint with original paper lable – no rust in or out Lift out tote & worn but sound leather carry handlePreowned (161-EW)
KENNEDY 18″ Cantilever Tool Box Chest HIP ROOF Heavy Duty
Hinges, Pins and Latches are Functioning; Some Dents but Still Very Solid Box; One Corner Bead Needs Rivet; Some Pitting on Bottom; Kennedy18″ Cantilever Tool Box Chest HIP ROOF Heavy Duty
Antique Kennedy Kits Metal Box With Handle And 3 Latches
In Useable condition. Has a slot cut in one end as seen in pictures. No key but latches work. Look closely at pictures. Sold as is. This measures 14″ wide 6″ deep and is 6-1/2″ tall
🇺🇸 Vintage Kennedy Kits 2-Tier Brown Metal Tackle Tool Box Latch Fishing Fish
2-Tier Tackle Fishing Box Organizer. Kennedy Kits – USA. There is a small dent along the top edge (see last picture.). Worst is the bottom. The latches and hardware is pretty tarnished, discolored and pitted.
Vintage Kennedy Kits K-20 Machinists Toolbox Single Latch
Vintage USA latch latches for tool box craftsman kennedy gerstner machinist box
They look like Excelsior latches but are not marked. This is a great utility latch that will work in many situations. Installation fasteners are not included.latch can accommodate many styles of fasteners, such as beveled-head screws or normal rivets, including pop rivets.
Vintage USA latch latches for tool box craftsman kennedy gerstner machinist box
They look like Excelsior latches but are not marked. This is a great utility latch that will work in many situations. Installation fasteners are not included.latch can accommodate many styles of fasteners, such as beveled-head screws or normal rivets, including pop rivets.