A RARE “SCRUB” PLANE CUTTING IRON for a “Hickory” brand No. Z40 Zenith scrub plane by the Marshall Wells Hdwe Company, Duluth, Minnesota. This 1 1/4″ width cutter would have been produced for this company by the Stanley Rule & Level Company. The cutting edge is not rounded on the end in the manner of a Standard Stanley scrub plane iron, but is is otherwise in excellent condition. Length = 5.75 Inches (Ref. Id No.: 472307) [Free Shipping]
Archives
Founder’s Grade Body for Marshall-Wells “Zenith” No Z608 Plane – mjdtoolparts
A FOUNDER’S GRADE CAST IRON BODY for a “Zenith” brand No. Z608 jointer plane by the Marshall Wells Hdwe Company, Duluth, Minnesota. This plane, which is designed for use with a 2 5/8″ width cutting iron, measures 24″ plane length. It was produced for the Marshall Wells Hardware Company by Sargent & Company of New Haven Connecticut and it is cast to receive the “Shaw Patent” type Frog. It is in unused condition and fully 95% of the original black japan finish remains. As good as they get. Length = 22.00 Inches (Ref. Id No.: 456398) [Free Shipping]
Orig. Cutting Iron & Chip Breaker for Zenith No. 2 or 2 C Plane – mjdtoolparts
A rare 1 5/8 inch width ZENITH BRAND 1 5/8 INCH WIDTH CUTTING IRON AND CHIP BREAKER for a Zenith No. Z2 or Z2 C plane by the Marshall Wells Hdwe Company, Duluth, Minnesota. The cutter and chip breaker have some very minor pitting at the top, but both are otherwise in excellent condition. The original screw to secure the chip breaker to the iron is included as well. Length = 7.00 Inches (Ref. Id No.: 357011) [Free Shipping]
Orig. Cast Iron Body for Marshall-Wells “Zenith” No 607 Plane -95%- mjdtoolparts
An original cast iron plane body for a Zenith brand No. Z607 jointer plane by the Marshall Wells Hardware Company, Duluth, Minnesota. The Zenith 600 series planes were made for them by Sargent and they are identical to the Shaw Patent series, in this case, the Sargent No. 22. The front of the plane has been milled where the Sargent markings were cast in the body, but the Shaw Patent information remains in the base behind the frog mechanism. This plane was designed for use with a cutting iron measuring 2 3/8″ in width. It is in excellent condition, retaining fully 95% of its original black japan finish. If you have a Z607 having a damaged or degraded body, this extra clean body will put you directly back in business. Length = 22.00 Inches (Ref. Id No.: 379096) [Free Shipping]