Millers Falls Hatchet & sheath

Has 3″ wide bit with good clean edge. Head is clean, rust free with a few minor hits on poll. 14″ long handle looks too clean to be original but could be, is solid & well secured retaining original finish.

Vintage — Millers Falls No. 525 Saw Rotatable Blade – Pistol Grip, Made in USA

Vintage — Millers Falls No. 525 Saw Rotatable Blade – Pistol Grip, Made in USA Vintage, used, may need some cleaning, sold as-is Please Note: Some of our merchandise is used, unless otherwise stated. As with most pre-owned items, some minor wear and signs of age should be expected. All major flaws and damage will be noted as we see them. Please check pictures carefully and message us with any questions. See Pictures for more info. Our pictures are of the actual item listed. Please Note: Some items may come with “Or Best Offers”. We cannot accept best offers on FREE shipping items. This is due to the cost of shipping for us that we gladly pass the savings onto you the customer as in free shipping. Most Importantly: We want you to feel happy about your purchase, And your experience with TopShop’s Unlimited. We love leaving positive 5 star feedback when acceptable to all our customers and we greatly appreciate your positive 5 star feedback in return if your happy. If for some reason you feel that you can’t leave positive feedback please contact us so we may attempt to find a solution and to make it right. EVERY ITEM is and will be shipped directly from our warehouse that is ONSITE. WE DO NOT USE A DROP SHIPPER AND EVERY ITEM IS IN STOCK. We ONLY Ship within the 48 U.S states! We can USUALLY ship to Alaska, Hawaii, and Puerto Rico (ONLY) items less than 20 pounds and/or under 12x12x12 inches for no extra charge; however sometimes a service charge may be required usually ranging for only a couple dollars for each item. We do NOT ship items over 12x12x12 and/or over 20 pounds to Alaska, Hawaii, and Puerto Rico at this time. Other US locations like Guam, Virgin Islands, etc… We DO NOT currently ship to. Packages are usually sent by USPS or FedEx and include tracking and delivery confirmation. Please use the shipping calculator in the ‘Shipping and Payments’ tab for prices and options if any other options are available for this item/s. Please allow up to 1 business day for shipping however most items are shipped out the same day the order is received. With that said once the item leaves our hands we have NO control of late delivery’s. If an item is late or damaged and out of our control (in route) contact your carrier to inquire about the status or open a damage claim with the carrier. Also send us a message. We will try to help in any way we can. All packages come insured and with a tracking number. Once a tracking number is provided it is out of our hands as it has been passed along to the carrier and is on its way. If you have any other shipping questions please let us know. eBay Managed Payments: It is your best protection as a buyer. Item offered as a Buy-It-Now with immediate payment required. All payments are processed through eBay. Sales tax may be applicable by state and is usually collected and remitted through eBay where required by law. Please Note: We strive to accurately photograph and list our items; NEW ITEMS: Returns are generally accepted within 30 days on most NEW items. If you are not satisfied with your purchase, please contact us within two days after receiving the item so we can offer a fair resolution. Buyer is responsible for return shipping charges except for issues due to OUR error. If returned make sure item is in the same condition as sent with the same packaging and contents. We reserve the right to charge a restocking fee and or partial refund to any item returned due to issues with fit, color, opened, or condition seen as pictures are provided in each listing. USED ITEMS: Returns are generally NOT accepted on most USED/Open-Box/Refurbished items. If we made a error please contact us within two days after receiving the item so we can offer a fair resolution. Buyer is responsible for return shipping charges except for issues due to OUR error. If a returned is accepted make sure item is in the same condition as sent with the same packaging and contents. We reserve the right to charge a restocking fee and or partial refund to any item returned due to issues with fit, color, opened, or condition seen as pictures are provided in each listing. THANK YOU FOR SHOPPING WITH US Vintage — Millers Falls No. 525 Saw Rotatable Blade – Pistol Grip, Made in USA TopShops Unlimited © 2018-2021

NEW Millers Falls No. 300 “Buck Rogers” Hack Saw, in box with 10 New Blades

This vintage Millers Falls No. 300 “Buck Rogers” hack saw is a great addition to any collection. The saw comes in its original box with 10 new blades, making it a perfect gift for any tool collector or woodworker. The saw was made in the United States and is a true vintage original. The Millers Falls brand is known for its quality and durability, making this saw a reliable tool for any carpentry or woodworking project. Its unique design and history make it a great conversation piece, while its functionality ensures it will be a practical addition to any tool collection. This saw is a must-have for any serious collector or woodworker.

VTG MILLERS FALLS NO.185C YANKEE PUSH DRILL 8Pc DRILL POINT BITS SET NOS SCARCE

VINTAGE MILLERS FALLS NO.185C YANKEE PUSH DRILL 8Pc DRILL POINT BITS RARE NEW OLD STOCK A REAL GEM NEW OLD STOCK CARPENTER / CABINETMAKER TOOL! SEE DETAILED PICTURES  Here is a Vintage  MILLERS FALLS NO.185C YANKEE PUSH DRILL 8Pc DRILL POINT BITS RARE NOS PERFECT MINT A REAL GEM NEW OLD STOCK CARPENTER / CABINETMAKER TOOL! This push drill is clean straight out of a time capsule! If you collect this sort of tool look closely at my pictures below! A scarce find in mint condition! THEY ARE THE STANDARD SET OF 8 BITS FROM 1/16″- 11/64″ AND ALL FIT INSIDE THE HANDLE FOR EASY ACCESS. YOU WILL BE HARD PRESSED TO FIND ANOTHER LIKE IT. Good luck and remember it may be the last one you will see in this New Old Stock Condition. ANY QUESTIONS JUST ASK GOOD LUCK AND HAPPY BIDDING

USED Millers Falls 100 Tape 3100 Nice Case , the first 10′ of tape broken off

USED Millers Falls 100′ Tape (with Damage)No. 3100 Note: The first 10′ of tape broken offNice CaseNOTE: The first 10′ of the tape was broken off and someone riveted the hook back on. The measuring starts at approximately the 10′ mark. REVIEW ALL PHOTOS and determine if the damage of the missing 10′ of the tape is acceptable Combined shipping available. Add all items to the “eBay Cart” before paying. Shipping will calculate based on total shipping weight of items. Inventory # 1222-3100 DAmaged 90555 Closet Wall

(1) Millers Falls Langdon Acme Mitre Box Leg & Screws 72C-75C rounded

1 leg from a vintage miller falls miter box comes with original screws and square nut for fastening note, this is the leg with rounded steel, some legs are flat steel depending on age of box, so make sure this is what you need pretty good paint on legs, see pictures for condition Legs are about 8-7/16″ long x 2-3/5″ tall x 1″ wide x 3-16″ thick. The hole spacing for mounting the legs onto the mitre box frame is 2-5/8″.

Millers Falls Langdon Acme Mitre Box Length Gauge Bracket Screw 1-1/4″ Long

For a complete description and condition grading, please read the full description before purchasing! This is a nice original replacement length stop screw for Millers Falls’ Langdon Acme mitre boxes. This screw is used to attach the length stop rod to the length stop bracket. It can also be used to attach the length stop bracket to the mitre box frame. Nice replacement with some wear but no damage.Unboxed specifications:1-1/4″ long with 1/4″-20 threads and weighs .8 ounces Visit my store for more antique and vintage tools and tool parts. My items are carefully packaged and shipped out on the same day payment is received, as long as payment is received by 3 pm Central Time (subject to post office hours, holidays, weekends, etc.) I have a lot of common and some hard-to-find tool parts that are not listed in my store. If you are not able to find what you need, feel free to send me a message and I will get back to you as soon as possible. All of my listed items have been inspected and tested to provide the best possible description. In some cases, parts may be brushed off with a soft-bristled brush, such as a paint brush, to remove surface dust or debris for photos. Unless otherwise noted, parts have not been cleaned beyond this. Although most of my items sell very quickly, metal parts may contain a small layer of oil, WD-40, grease, or similar substance to preserve the item and prevent rusting while it is in inventory. ALL inventory is stored in an environment where climate and humidity are controlled to ensure each item is received in the same condition in which it is presented in the listing. Unless otherwise noted in the listing, photos are of the exact item you will receive. Every single item is listed and packaged by myself and I take pride in carefully packaging all items, regardless of purchase amount. Creating a positive experience for you, the buyer, is my top priority. Positive feedback is left for all buyers as soon as payment is received because by paying for an item you have fulfilled your obligation in the agreement.When applicable, I try to grade the condition of every tool and part objectively using John Walter’s grading system from his “Antique & Collectible Stanley Tools” price guide as described below. This is not necessarily an industry standard for grading, and grading vocabulary will vary from collector to collector since there is some subjectivity involved (i.e. “mint” vs. “near mint”). For these reasons, I will also try to list a description of these grades in each listing in order to clarify the grade given to each item. Please refer to the details below and read the “condition” portion of this listing for the condition grading assigned to this item. MINT: 100% of original finish remaining. No signs of wear or rust – probably never used. No problems or issues. EXCELLENT: 95-99% of original finish remaining. Very slight wear with no rust. No problems or issues. GOOD PLUS: 85-95% of original finish remaining. Used but well maintained. Scuffs, light wear, very little rust. GOOD: 65-85% of original finish remaining. Moderate wear and/or rust. Minor deficiencies – owner’s initials, nicks, etc. GOOD MINUS: 50-65% of original finish remaining. Has seen hard use, but remains serviceable. Scratches, nicks, dents, cracks, chips, improper replacement parts. FAIR: 25-50% of original finish remaining. Heavy wear and rust. Some parts are broken, missing, or improper – serious flaws. POOR: 0-25% of original finish remaining. Pitted, abused, heavily worn. Serious damage and missing major parts.