Founder’s Grade 7/16″ Iron for Stanley Miller Patent No. 41/42/43- mjdtoolparts

A FOUNDER’S GRADE 7/16″ WIDTH CUTTING IRON by Stanley for the Miller Patent series of planes. These distinctive extra thick irons were provided with the Miller Patent planes No. 41, 42, 43 and 44. This example is in essentially unused condition. As good as they get. Length = 3.38 Inches (Ref. Id No.: 474060) [Free Shipping]

Orig. Type 6 Wraparound Fence for Miller Patent Plane – No. 41 – mjdtoolparts

An ORIGINAL CAST IRON “WRAPAROUND” FENCE for a Stanley Miller Patent combination plane, No. 41, by STANLEY. This example, which came from a “Type 6” version of the No. 41, has only a minor pinhead size chip to one of the sleeves for the arm to note as an apology. If you have a Miller Patent No. 41 plane in need of this frequently missing plane component, this extra clean example, which retains approximately 95% of its original black japan finish, will make your plane complete. Length = 10.38 Inches (Ref. Id No.: 371681) [Free Shipping]

Rare Vintage Amidon Patent Pre-Millers Falls Bit Brace Hand Drill (Parts) – B6

B6 is for my inventory reference. Rare Vintage Amidon Patent Pre-Millers Falls Bit Brace Hand Drill (For parts or repair) Early pre-Millers Falls Amidon Patent brace, being sold for parts or repair. Missing the chuck parts like the jaws, and the chuck housing is a bit rough. The frame has pitting, but the top wood handle is solid and in good shape. Good for parts, but the jaws could also be replaced from a donor drill. Pictures are the best description, comes as seen in pics, any questions just ask.

Orig. Filletster Bed for Stanley Miller Patent Plane No. 41 or 42- mjdtoolparts

An ORIGINAL CAST IRON FILLETSTER BED for a Stanley Miller Patent combination plow and filletster plane by STANLEY. This frequently missing, damaged or degraded plane component is in excellent condition, retaining some 95% of its original black japan finish. the original screws to secure the bed to the plane body and the original cutting iron are included as well. Length = 8.25 Inches (Ref. Id No.: 380747) [Free Shipping]

2124 Stanley No. 141 Miller’s Patent 1/4″ Match or Tongue Iron

This is a 1/4″ match or tongue iron for a Stanley No. 141 Miller’s Patent. This is a used part. It may have some rust, scratches, orsome light pitting, but with a little effort it will be usable. Wood parts may have toolbox dings, but are free of checks or repairs, unless otherwise noted. We always give FREE USA shipping; international shipping is at your risk. We invite you to read our feedback.Item can be picked up at The Vintage Tool Shoppe54 Danville RdFremont NH 03044Call or text to make arraignment 603 930 3948

Founder’s Grade 5/16″ Iron for Stanley Miller Patent No. 41/42/43- mjdtoolparts

A FOUNDER’S GRADE 5/16″ WIDTH CUTTING IRON for Stanley’s Miller Patent planes. This extra thick cutting iron was included with the Miller Patent planes No. 41, 42, 43 and 44. It is in essentially unused condition and it is clearly marked on the side with the width of the blade. As good as they get. Length = 3.38 Inches (Ref. Id No.: 461384) [Free Shipping]

Vintage Millers Falls No 12 Bit Brace Hand Drill McCoy Patent – B5

B5 is for my inventory reference. Vintage Millers Falls No 12 Bit Brace Hand Drill McCoy Patent Drill is in working condition. Wood handles both side and top are solid and have normal signs of wear, some scratches in top handle but solid. The drill frame itself has pitting in areas, might have been partially cleaned up by a previous owner. The drill chuck works and operates at it should and has some rust. McCoy Patent chuck and marked No 12 on the frame. Pictures are the best description. Comes as seen in pics, any questions just ask.