WS Tools No. 151 C Spokeshave Birmingham UK Vintage Woodworking Tool Rare

WS Tools No. 151 C Spokeshave is a vintage woodworking tool that was manufactured in Birmingham, England. Rare original spokeshave. Blade was replaced with a Stanley SW blade. Manufactured between 1943 and 1951 until WS Tools was bought out by Woden (1952) and Woden by Record (1960). Recommended: www.wstoolsbirmingham.com for information on this little known tool making company. With its unique design and craftsmanship, this rare collectible piece is a must-have for woodworking enthusiasts and tool collectors alike.

Founder’s Grade A2 Hock Iron for Stanley No. 151 Spokesave – mjdtoolparts

A FOUNDER’S GRADE 2 1/8″ WIDTH REPLACEMENT CUTTING IRON for a Stanley 151 or 152 double adjustable spokeshave by Hock Tools, Mendocino, California. This cutter is boldly marked with the Hock logo and the designation “A2” which denotes the hardness of the iron. An extra clean cutting iron and chip breaker in unused original condition. As good as they get. Length = 2.13 Inches (Ref. Id No.: 470858) [Free Shipping]

White Hanson Postal Scale Vintage 1960’s Stamp-Saver Model No. 151 Jan 1968

The White Hanson Postal Scale Vintage 1960’s Stamp-Saver Model No. 151 1 LB Jan 1968 is a collectible item that harkens back to a bygone era of philately. Made in the United States, this postal scale is a nostalgic piece that would be a cherished addition to any stamp collector’s collection. Its vintage design and functionality make it a unique and sought-after item for enthusiasts of history and craftsmanship alike.

Founder’s Grade Body for Stanley No. 151 English Spokeshave -99% – mjdtoolparts

A FOUNDER’S GRADE UNUSED ORIGINAL BODY for a Stanley No. 151 double adjustable spokeshave by Stanley Tools, Sheffield, England. The two adjusting screws are included with this old hardware stock body, which has the flat, non-radiused sole facing. Fully 99% of the original black japan finish remains on this Instant Upgrade item. If you have a damaged or degraded Stanley No. 151, this unused body will make it infinitely better. As good as they get. Length = 10.00 Inches (Ref. Id No.: 390385) [Free Shipping]

Original Vintage VOLKANO Model No. 151 Flashlight, Not tested

The glass bulb is not sitting properly in the head of the flashlight. It is loose and moves a little. Not sure what the problem is or how this affects the light. Sold as is. Because of this, there may be and probably are small marks, defects, scratches or other issues with them.

Founder’s Grade Cap for Stanley No. 151 Spokeshave – England – mjdparts

A FOUNDER’S GRADE SCREW LOCK CAP AND TENSIONING SCREW for a Stanley No. 151 double adjustable spokeshave by Stanley Tools, Sheffield, England. This cap, which has a polished finish, will also fit U.S.A. made versions of the No. 151. As good as they get. Length = 2.38 Inches (Ref. Id No.: 449971) [Free Shipping]

Founder”s Grade Body for Stanley No. 151 Spokeshave – 98% – mjdtoolparts

A FOUNDER’S GRADE CAST IRON BODY, THREADED RODS AND ADJUSTING NUTS for a Stanley No. 151 spoke shave by STANLEY. This later type body has retains fully 98% original shiny black japan finish. It is in essentially unused condition and could be put to use if you have a No. 151 shave having a damaged or degraded body. As good as they get. Length = 10.00 Inches (Ref. Id No.: 453140) [Free Shipping]

Body for Stanley Spokeshave No. 151 M Malleable Iron-90% Japan- mjdtoolparts

An ORIGINAL MALLEABLE IRON BODY, adjusting nuts and screws for a Stanley No. 151 M malleable iron spoke shave by STANLEY. This uncommon shave is in excellent condition, retaining approximately 90% of the original black japan. The plane is cast on the underside with the “No. 151 M” designation and it is in ready to use condition. If you have dropped and broken your Stanley No. 151 spokeshave, fitting the parts on this malleable iron body will protect your spokeshave from here on out. Length = 10.00 Inches (Ref. Id No.: 469985) [Free Shipping]

Origina Body for Record No. A151 Spokeshave – 98% Japon – mjdtoolparts

An extra clean CAST IRON BODY for a Record No. A151 double adjustable curved sole spoke shave by the Record Tool Works, Sheffield, England. Fully 98% of the original red japan finish remains on this body, which includes both original adjusting screws. Both original Record decals remain on the body. If you have a Record spokeshave having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 437235) [Free Shipping]

Body for Stanley Spokeshave No. 151 or 152- 98% Japan Finish – mjdtoolparts

An ORIGINAL CAST IRON BODY, THREADED RODS AND ADJUSTING NUTS for a Stanley No. 151 spoke shave by STANLEY. This later type body retains nearly all of its original black japan finish. It is in excellent condition, noting a bit of red paint applied by the previous owner to identify it as his. It could be put to use if you have a No. 151 shave having a damaged or degraded body. Length = 10.00 Inches (Ref. Id No.: 396158) [Free Shipping]

Orig. Later Type 2 1/8″ Iron for “Kunz” No. 151 Spokeshave – mjdtoolparts

An ORIGINAL 2 1/8″ WIDTH CUTTING IRON for a “Kunz” brand No. 151 spoke double adjustable spokeshave by Tresselt GmbH, Rossbreitenbach, Germany. This very little used cutting iron is marked at the top with the brand name and it is in ready to use condition. Length = 2.13 Inches (Ref. Id No.: 456751) [Free Shipping]

Founder’s Grade Flat Sole Body for Record No. A151 Spokeshave – mjdtoolparts

An ORIGINAL FLAT SOLE CAST IRON BODY for a Record No. A151 double adjustable spoke shave by the Record Tool Works, Sheffield, England. Fully 98% of the original blue japan finish remains on this body, which includes both original adjusting screws. If you have a Record spokeshave having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 468263) [Free Shipping]