Orig. 2 1/8″ Cutting Iron for Ohio Tool Co. No. O27 Transitional – mjdtoolparts

An ORIGINAL 2 1/8″ WIDTH CUTTING IRON for an Ohio Tool Company No. O27 jack plane by the Ohio Tool Company, Columbus, Ohio. This early iron is marked with the early Ohio Tool Company early arch form trademark. It is in excellent condition and could be put directly to use. Length = 7.38 Inches (Ref. Id No.: 462077) [Free Shipping]

Orig. 1 3/4″ Width Transitional Plane Frog for Ohio No. O21 Plane – mjdtoolparts

An ORIGINAL TRANSITIONAL PLANE BODY for an Ohio Tool No. O22 transitional plane by the Ohio Tool Company, Columbus, Ohio. This clean and ready to use plane body includes the frog mechanism. It is in excellent condition, retaining some 90% of its original black japan and lacquer finishes. Length = 8.00 Inches (Ref. Id No.: 379132) [Free Shipping]

Original Ohio Tool Two-Inch Width “Toothing” Iron for Veneer Work – mjdtoolparts

An EXTRA CLEAN TWO-INCH WIDTH “TOOTHING” CUTTING IRON FOR A WOODEN PLANE by the Ohio Tool Company, Columbus, Ohio. This iron has the serrated facing on the lower portion that allows the blade to be used to roughen a wooden surface prior to the application of wood veneer. This iron has been boldly struck with the Ohio Tool Company imprint and it looks to have been very little if ever used. Length = 6.38 Inches (Ref. Id No.: 420977) [Free Shipping]

Orig. 2″ Black Japan Finish Frog for Ohio Tool No. 035 Plane – mjdtoolparts

An ORIGINAL TWO-INCH WIDTH FROG MECHANISM for an Ohio Tool Company No. O26 transitional plane jack plane or No. O35 handled transitional smoothing plane by the Ohio Tool Company, Columbus, Ohio. The original fixing screws to secure the frog to the plane body are included with the frog. Length = 5.25 Inches (Ref. Id No.: 431652) [Free Shipping]

Orig. 2 1/8″ Chip Brkr./Screw for Ohio Tool No. O10 Rabbet Plane – mjdtoolparts

An ORIGINAL CHIP BREAKER AND FIXING SCREW for an Ohio Tool Company No. O3 eight-inch length, 1 3/4″ width smoothing plane by the Ohio Tool Company, Columbus, Ohio. The original screw to secure the chip breaker to the cutting iron is included as well. This chip breaker will also work with the Ohio Tool No. O5 1/4 “Jr. Jack” plane, which also uses a 1 3/4″ width cutting iron. Length = 5.25 Inches (Ref. Id No.: 393368) [Free Shipping]

Orig. 2 3/8″ Frog Mechanaism for Ohio Tool No. O4 1/2, O6 & O7 – mjdtoolparts

An ORIGINAL FROG MECHANISM for an Ohio Tool Company No. O 4 1/2 heavy smoothing plane, No. O6 fore plane or No. O7 jointer plane by the Ohio Tool Company, Columbus, Ohio. Fully 95% of the original black japan finish remains on this 2 3/8 inch width frog mechanism. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 382360) [Free Shipping]

Orig. Grain Painted Hdl./Knob for Ohio No. O4 1/4 Bench Plane -mjdtoolparts

An ORIGINAL GRAIN PAINTED FRONT KNOB AND REAR HANDLE for an Ohio Tool No. O4 1/4 or O4 1/4 C heavy smoothing plane by the Ohio Tool Company, Columbus, Ohio. These handles are in superb condition, noting that the original owner, one “Leo Nugent” stamped his name on the left side of the handle. A superb set of handles that retain nearly all of their original grain painted finish. Length = 4.25 Inches (Ref. Id No.: 388111) [Free Shipping]

Founder’s Grade Frog for Ohio Tool No. O4 1/2, O6, O7 Bench Plane – mjdtoolparts

A FOUNDER’S GRADE FROG MECHANISM for an Ohio Tool Company No. O 4 1/2 heavy smoothing plane, No. O6 fore plane or No. O7 jointer plane by the Ohio Tool Company, Columbus, Ohio. Fully 95% of the original black japan finish remains on this 2 3/8″ width frog mechanism. The original screws and washers to secure the frog mechanism to the plane body are included as well. As good as they get. Length = 7.00 Inches (Ref. Id No.: 473523) [Free Shipping]

Orig. Lever Cap for Ohio No. O4 1/2, O6, O7 Planes – 2 3/8″- mjdtoolparts

An ORIGINAL LEVER CAP for an Ohio Tool Company No. O4 1/2, O6 or O7 bench plane by the Ohio Tool Company, Columbus, Ohio. This cap, which measures 2 3/8 inches in width, has the keyhole pattern opening for the screw to secure it to the plane body. It is in essentially unused condition. Length = 5.00 Inches (Ref. Id No.: 419933) [Free Shipping]

Orig. 2″ Width Tapred Cutting Iron for Ohio Tool No. O4/O5 Planes – mjdtoolparts

A TWO-INCH WIDTH CUTTING IRON for an Ohio Tool No. O4 smooth plane or No. O5 jack plane by the Ohio Tool Company, Columbus, Ohio. This clean and ready to use cutting iron, which is marked with the Ohio Tool “World” trademark symbol, is in excellent condition and could be put directly to use. Length = 7.38 Inches (Ref. Id No.: 373934) [Free Shipping]

Orig. 2″ Width Frog & Screws Ohio Tool No. O4 or O5 Plane – 75% – mjdtoolparts

An ORIGINAL FROG MECHANISM for an Ohio Tool No. O4 smoothing plane or No. O5 jack plane by the Ohio Tool Company, Columbus, Ohio. Fully 75% of the original black japan finish remains on this two inch width frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 469997) [Free Shipping]

Orig. Cap for Ohio No. O4 1/2 Hvy. Smooth Plane – Minor Chips – mjdtoolparts

An ORIGINAL LEVER CAP for an Ohio Tool 2 3/8″ width No. O4 1/2 heavy smoothing plane, No. O6 fore plane or No. O7 jointer plane by the Ohio Tool Company, Columbus, Ohio. This lever cap has only some pinhead size chips on the leading edge to note as an apology. It is in excellent condition and could be put directly to use. Length = 5.00 Inches (Ref. Id No.: 473788) [Free Shipping]

Orig. Maroon Japan Finish Frog for Ohio Tool No. O4 or O5 Planes – mjdtoolparts

An ORIGINAL FROG MECHANISM for an Ohio Tool No. O4 smoothing plane or No. O5 jack plane by the Ohio Tool Company, Columbus, Ohio. Approximately 85% of the original maroon japan finish remains on this two inch width frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 377895) [Free Shipping]

Orig. Frog Mechanism for Ohio Tool No. O4 or O5 Plane – 95% Japan – mjdtoolparts

An ORIGINAL FROG MECHANISM for an Ohio Tool No. O4 smoothing plane or No. O5 jack plane by the Ohio Tool Company, Columbus, Ohio. Fully 95% of the original black japan finish remains on this two inch width frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 416744) [Free Shipping]

Orig. Early Rosewood Handle for Ohio Tool No. O4 1/2, O6 & O7 -mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD REAR HANDLE for an Ohio Tool No. O4 1/2, O6 or O7 plane by the Ohio Tool Company, Columbus, Ohio. This handle is in excellent condition, noting that the tote “horn” has been reshaped by a previous owner. The original steel rod and brass nut to secure the handle to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 470987) [Free Shipping]

Original Body for Ohio Tool No. O4 Smooth Plane – 85% Japan – mjdtoolparts

An ORIGINAL CAST IRON BODY for an Ohio Tool Company No. O4 nine-inch length smoothing plane by the Ohio Tool Company, Columbus, Ohio. Approximately 60% of the original black japan finish remains on this plane, which is cast with the “O4” number designation on the bed in front of the knob. It is absent any chips, cracks or other apologies and could be put directly to use. Length = 9.00 Inches (Ref. Id No.: 363775) [Free Shipping]

Orig. Forward Fixing Screw for Ohio Tool Bench Planes – mjdtoolparts

An ORIGINAL PLANE HANDLE FORWARD FIXING SCREW for the rear handle on an Ohio Tool Company bench plane by the Ohio Tool Company, Columbus, Ohio. This screw will work with Ohio Tool planes in 04 1/2. O5 1/2, O6, O7 and O8. Length = 0.63 Inches (Ref. Id No.: 474308) [Free Shipping]

Orig. Rosewood Hdl./Screw for Ohio No. O7 Jointer – Glue Repair – mjdtoolparts

An ORIGINAL REAR HANDLE for an Ohio Tool No. O6 or O7 bench plane by the Ohio Tool Company, Columbus, Ohio. This handle is in excellent condition, but it has a nearly seamless glue repair about 1 1/2″ from the base. The original screws to secure the handle to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 451961) [Free Shipping]