Railroad Rail | Page 2

Steel Railroad Train Track 12” Anvil / Display

This unique and historical piece would be a great addition to any collection of tools, hardware, or locks, especially for those interested in blacksmithing.

Vintage Blacksmith Shop Anvil Railroad Track Anvil Door Stop 9 Lbs 6 Inch Tool

2” Steel Railroad Rail Train track Anvil Collectible Blacksmith Craft – Rusted

Weighs 3.4 pounds. Rust on the piece

Steel Section of Railroad Train Track Anvil Etc. Great for Crafts, Leather Work

Used, rough shape but entirely solid and completely usable.

Steel Railroad Train Track ( Approximately 7 Lbs ) Small Anvil / Display

It can serve as a small anvil or display piece for collectors and enthusiasts of tools, hardware, and blacksmithing.

Steel Railroad Train Track { Approximately 21 Lbs } Anvil / Display

This anvil is designed to withstand the toughest blows and Serve as a striking tool for various forging techniques.

Steel Railroad Train Track ( Approximately 39 Lbs ) Anvil Etc.

Rare Steel Railroad Rail Train track Anvil Collectible Blacksmithing

Rare Steel Railroad Rail Train track Anvil Collectible Blacksmith. Average item pictured that you will receive. Section is cut 1 inch to 1 1/8 long. Cuts could be up to 1/8″ off from being square. Rust on surface and pitting from age. Great section for decorative views or for repurpose. Please review all photos Before purchasing thank you. Take a look at our great feedback from all of our satisfied customers.

Vintage Steel Railroad Rail Track Anvil Collectible for Blacksmithing or Decor

Vintage Steel Railroad Rail Track Anvil Collectible for Blacksmithing or Decor Found this Vintage Railroad Rail Track Anvil Can be used for Blacksmithing, Jewelry Work or as Decoration like Bookends Check Pictures for Physical Measurments of the Anvil. Shipping to the 48 Continental United States Only

2 vtg anvils small jewlers hobbyist railroad track

Steel Railroad Train Track { Approximately 37 Lbs } Anvil / Etc.

Vintage Railroad Track Anvil 15 lb 8 oz

This stands about 5″ tall and a little shy of 7″ long.

Anvil, Vtg. 15 lb. Home Made Railroad Rail Anvil 13-1/4″ Long, 4-3/4″ Wide, USA

And use the large flat surface as the Anvil. 13-1/4″ Long, 4-3/4″ Wide at Base x 4-3/4″ Tall. Weighs 15 lbs. This Tool is in good used working Condition.

Anvil, Vtg Railroad Rail Anvil, 22 lbs. 8 oz., 9″ Long, 5-1/2″ Wide, 5-3/4″ Tall

And use the large flat surface as the Anvil. 9″ Long, 5-1/2″ Wide, 5-3/4″ Tall. Weighs 22 lbs. This Tool is in used working Condition.

Antique Late 1800s Railroad Track/ Sawmill Lumber Roller-Double Unit- Rare Piece

The functional design and sturdy construction suggest its practical use in transporting lumber or other heavy materials. I cannot do anything about the price, it’s a large heavy item. This is from the late 1800s.

11 ” Steel Railroad Rail Train track Anvil Collectible Blacksmith 28 Pounds VTG

See photos for condition this lot sold as is

Anvil, Railroad Rail Anvil 15 lbs.6 oz., 8″ Long 4-3/4″ Wide at Base 4-3/8″ Tall

And use the large flat surface as the Anvil. 8″ Long, 4-3/4″ Wide at Base x 4-3/8″ Tall. Weighs 15 lbs. This Tool is in good used working Condition.

Anvil, Vtg Railroad Rail Anvil, 22 lbs. 11 oz., 13.75″ Long Hand Made 5830

I believe this could be hand made from a railroad trackweight 22 lbs 11 ozmeasures about 13.75″ long x 6″ tall x 2.5″ wide with a base that can be mounted 7.25″ long and 5.5″ widesold as shown will ship with care This is a used item so minor signs of wear should be expected. Any additional notes specific to this item are listed above. This will be packed with care for safe travels. If shipping costs look a bit off please message me for a more accurate shipping cost. Reasonable offers are considered. Local Pick Up – Message me for details

Jon Pohlman