Rosewood | Page 2 | Jon Pohlman

Gage G31 Plane,Blade Adj Assy(ONLY)Wood Bottom type~GD+🤠G6.4.26-L

Blade adj assy (ONLY) for GageNo.G31 Plane,wood bottom~GD+🤠. COMPLETE PLANE (. blade adjuster assy (ONLY)~NO OTHER PARTS ARE INCLUDED. we even miss the boat once in a while. ⭐We strive to be factual & accurate as possible. ).

Hand-Forged Double Blacksmith’s Hammer, 1 kg (2.2 lbs)

The handle is made of rosewood, adding a touch of elegance and comfort to the tool.

Stanley 6,7,8 Plane Handle Assy(ONLY)Rosewood, Stylized,1874-07, GD🤠S7.9.26

Handle/stud/nut assy (ONLY) for Stanley6,7 ,8 Plane,Rosewood~GD+🤠. COMPLETE PLANE (. handle/stud/nut assy (ONLY)~NO OTHER PARTS ARE INCLUDED. handle WAS ON) SHOWN FOR ID & IS NOT INCLUDED. we even miss the boat once in a while.

Orig. Rosewood Handle For Stanley No. 4 or 604 Plane- Orig. Decal – mjdtoolparts

An ORIGINAL ROSEWOOD HANDLE FOR A STANLEY NO. 4, 4 C, 604 OR 604 C SMOOTHING PLANE. This nicely grained Brazilian Rosewood handle is in essentially unused condition. Much of the original decal remains on the handle. Length = 4.38 Inches (Ref. Id No.: 368097) [Free Shipping]

Stanley Bailey BED ROCK NO 604 Rosewood WOOD Tote VINTAGE ORIGINAL PART

PICTURED IS ACTUAL ROSEWOOD TOTE FROM DAMAGED STANLEY NO 604 BED ROCK PLANE WE SHIP SAME DAY PAYMENT CLEARS

Extra Clean Stanley No. 25 Rosewood Handle 8″ “T” Bevel – Nice – mjdtoolparts

An ORIGINAL EIGHT-INCH SIZE ROSEWOOD BODY SLIDING “T” BEVEL, No. 25, by STANLEY. The blade retains nearly all of its original blued finish and nearly all of the original lacquer finish remains on the body of this extra clean and ready to use bevel. Length = 8.00 Inches (Ref. Id No.: 468586) [Free Shipping]

ROSEWOOD AND BRASS SCREW STEM. MORTICE GAUGE

ROSEWOOD AND BRASS SCREW STEM MORTICE GAUGE IN USED, BUT CLEAN CONDITION, CONDITION EXACTLY AS PER PHOTOS

Stanley 45 Round Knob in Rosewood PLA with Hardware

Rosewood PLA contains 15% wood fibers. These knobs are very sturdy 3d printed with 4 walls and 30% infill. Brass slotted barrel nut and 7/32-20 threaded rod included.

32” Rosewood Ax Handle Replacement – Fits Most Camp, Broad, and Single Bit

Dense hardwood (appears to be rosewood). Comfortable flared palm swell.

Stanley 4,5 Plane,Knob Assy(ONLY)Tall,Rosewood,ringbase,1929-41~GD+🤠S8.6.23R

Knob Assy (ONLY) for StanleyNo.4,5 Plane,tall rosewood,1929-41~GD++🤠. fits base ring introduced in 1929. COMPLETE PLANE (. knob WAS ON) SHOWN FOR ID & IS NOT INCLUDED. knob/stud/nut Assy (ONLY)~NO OTHER PARTS ARE INCLUDED.

v nice ROSEWOOD DISSTON MORSS Marking gage gauge woodworking tool

Disston and Morss rosewood marking gauge. Rosewood Marking Gage. Wood in very nice shape. Very clean shape, good mark.

Beautiful G. W. Denison Rosewood & Boxwood Closed Tote Screw Arm Plow Plane+Stnd

No rust or pitting on the skate or Ohio Tool 7/16″ wide iron. This plane also features a beautifully grained rosewood wedge and molded rosewood fence. Rosewood grain is eyepopping and the boxwood is equally stunning.

Stanley Bed Rock No. 605½ Bench Plane – Original Rosewood – Excellent Condition

This plane retains its original Stanley Bed Rock lever cap, original Stanley cutter marked “STANLEY PAT. AP’L. 1892,” and rosewood front knob and rear tote. The body is clearly cast “No. 605½” at the toe, with the “PAT’D APR. 2-95” patent casting behind the front knob.

early 4″ Stanley No 1 or No 10 try square rosewood infill pre Handy Grips ref B

Condition is very good, especially for a tool that is at least 125 years old! Just a tiny hint of pitting. The infill wood has a few scratches and dings, and one chip in an upper corner. The blade is reasonably straight if you sight down the upper edge.

Sanderson Mini 3 Piece Rosewood Marking Set Made In England W/Box

All plugs are US Standard plugs and may not work in other countries.

E.I. Rosewood Tote & Knob For Stanley No 3, 4, 603, 604 Hand Plane w/ Low Knob

Hand Made East Indian Rosewood Stanley Plane Tote & Knob For No 3, 4, 4, 5 1/4 603, 604, and 605 1/4. Shipped with USPS Priority Mail. The original Stanley’s were made from Brazilian rosewood which is cites 1 listed and prohibitively hard to get and extremely expensive. East Indian rosewood is, while still expensive, is a close alternative. It is just as hard and the color is a close match, in my opinion. I hand make these from solid wood. The photos are a representation and not the exact pieces. These fit type 10 or newer planes. if you need for a 9 or earlier please let me know and I will make one to fit your plane. To insure proper fit please send me the lengths of the threaded rods for your tote and knob.

LARGE ROSEWOOD SLICK CHISEL HANDLE OLD TOOLS FOR TIMBER FRAMING CHISEL

FOR TIMBER FRAMING CHISEL & RESTORATION OF OLD TOOLS. LARGE ROSEWOOD SLICK CHISEL HANDLE.

Crown Tools Marking Gauge, Rosewood And 6” Rosewood Marking Knife

Both in very good condition + hardly used

Awesome JOHN HEINZ Brass & Rosewood Goat Head Hammer

early 12″ Stanley No 1 or No 10 try square rosewood infill pre Handy Grips

Condition is generally very good, especially for a tool that is at least 125 years old! There is almost no pitting. The blade is reasonably straight with a slight bow if you sight down the upper edge.

Orig. Rosewood Fence for Sandusky No. 102 Handled Plow Plane – mjdtoolparts

An ORIGINAL ROSEWOOD FENCE FOR A SANDUSKY NO. 102 HANDLED ROSEWOOD PLOW PLANE by the Sandusky Tool Company, Sandusky, Ohio. This Brazilian Rosewood fence is in excellent condition and could be put directly to use. It came from a No. 102 plow, but would likely alfo work with other Sandusky plow planes. Length = 9.25 Inches (Ref. Id No.: 464587) [Free Shipping]

Jon Pohlman