Orig. Lever Cap for Sears Dunlap No. 3726 Smooth Plane – Black – mjdtooparts

An ORIGINAL NICKEL PLATED CAM LOCK LEVER CAP for a Sears “Dunlap” brand No. 3726 smooth plane by Sears, Roebuck & Company, Chicago, Illinois. This cap, which is designed for use with a 1 3/4″ width cutting iron, is in top condition, with an oval recess in the center filled with the “Dunlap” name retaining its original black japan infill. Length = 5.25 Inches (Ref. Id No.: 466794) [Free Shipping]

Orig. Front Knob/Screw for Sears Craftsman No. 5264 Smooth Plane – mjdtoolparts

An ORIGINAL FRONT KNOB AND FIXING SCREW for a Sears “Craftsman” brand No. 5246 smoothing plane by Sears, Roebuck & Company, Chicago, Illinois. This knob has a few scuffs and scratches, but it is otherwise in excellent condition and could be put directly to use. Length = 2.75 Inches (Ref. Id No.: 441962) [Free Shipping]

Orig. Plane Body for Sears Craftsman #3741 Plane – Gray Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY AND FROG MECHANISM for a Sears Craftrsman No. 3741 smooth plane, the equivalent of the Stanley No. 3, by Sears, Roebuck & Company, Chicago, Illinois. Fully 98% of the original black and red japan finishes remains on this plane body, which was designed to use a 1 3/4″ width cutting iron. this later type plane was produced for Sears by the Millers Falls Company. Length = 9.50 Inches (Ref. Id No.: 439316) [Free Shipping]

Orig. Plane Body for Sears Craftsman #3741 Plane – Gray Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Sears Craftrsman No. 3741 smooth plane, the equivalent of the Stanley No. 3, by Sears, Roebuck & Company, Chicago, Illinois. Fully 98% of the original gray japan finish remains on this plane body, which was designed to use a 1 3/4″ width cutting iron. this later type plane was produced for Sears by the Millers Falls Company. Length = 9.50 Inches (Ref. Id No.: 361635) [Free Shipping]

Orig. Early Type Cutting Iron for Sears No. 3730 Rabbet Plane – mjdtoolparts

An ORIGINAL CUTTING IRON for a Sears “Craftsman” brand filletster plane, No. 3730, by Sears, Roebuck & Company, Chicago, Illinois. This cutter, which is marked with the early oval form logo, is in excellent condition and could be put directly to use. Length = 3.75 Inches (Ref. Id No.: 450174) [Free Shipping]

Orig. Lever Cap for Sears “Craftsman” NO. 3730 Rabbet Plane – mjdtoolparts

An ORIGINAL LATER TYPE SCREW LOCK CAP for a Sears Craftsman brand rabbet and filletster plane, No. 3720, by Sears, Roebuck & Company, Chicago, Illinois. This ca. 1950’s cap retains approximately 90% of its original black japan finish. The original tension screw to secure the cutting iron to the plane is included as well. Length = 3.00 Inches (Ref. Id No.: 374703) [Free Shipping]

Later Type Screw Lock Cap Iron for Craftsman No. 3720 Rabbet Plane -mjdtoolparts

An ORIGINAL LATER TYPE SCREW LOCK CAP for a Sears Craftsman brand rabbet and filletster plane, No. 3720, by Sears, Roebuck & Company, Chicago, Illinois. This ca. 1950’s cap retains approximately 90% of its original black japan finish. The original tension screw to secure the cutting iron to the plane is included as well. Length = 3.00 Inches (Ref. Id No.: 359097) [Free Shipping]

Founder’s Grade Blade for Sears Craftsman No. 3730 Rabbet Plane -mjdtoolparts

A FOUNDER’S GRADE ORIGINAL CUTTING IRON FOR A SEARS CRAFTSMAN RABBET AND FILLETSTER PLANE by Sears, Roebuck & Company, Chicago, Illinois. This 1 1/2 inch width cutter is in unused condition. It is marked with the Craftsman logo and the number designation. As good as they get. Length = 3.75 Inches (Ref. Id No.: 386589) [Free Shipping]

Orig. Cutter for Sears “Craftsman” No. 3730 Rabbet Plane – mjdtoolparts

An ORIGINAL CUTTING IRON FOR A SEARS CRAFTSMAN RABBET AND FILLETSTER PLANE by Sears, Roebuck & Company, Chicago, Illinois. This 1 1/2 inch width cutter is in excellent working condition. It is marked with the Craftsman logo and the designation “BL” at the top of the iron. Length = 3.75 Inches (Ref. Id No.: 449288) [Free Shipping]

Orig. Cutter for Sears Craftsman No. 3730 Rabbet Plane – Unmarked -mjdtoolparts

An ORIGINAL CUTTING IRON for a Sears “Craftsman” brand rabbet and filletster plane by Sears, Roebuck & Company, Chicago, Illinois. This unused condition cutter is not marked in any way. It will also work in the Millers Falls No. 85 rabbet plane as the plane was made for Sears by Millers Falls using the same plane body as used on the Millers Falls planes. Length = 3.75 Inches (Ref. Id No.: 388354) [Free Shipping]

Orig. Handles for Sears Dunlap No. 3726 Smooth Plane – w/ Screws – mjdtoolparts

An ORIGINAL STAINED HARDWOOD FRONT KNOB AND REAR HANDLE for a Sears “Dunlap” brand No. 3726 smoothing plane by Sears, Roebuck & Company, Chicago, Illinois. These handles are in essentially unused condition. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.38 Inches (Ref. Id No.: 466796) [Free Shipping]

Black Japan Body for Sears Craftsman No. 3720 Rabbet Plane -mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Sears craftsman brand rabbet and filletster plane, No. 3730, by Sears, Roebuck & Company, Chicago, Illinois. This ca. 1930’s era plane would have been produced for Sears by the Millers Falls Company and this body is interchangeable with parts from the Millers Falls No. 85 rabbet and filletste plane. This plane retains fully 98% of its original black japan finish and is in unused condition. Length = 10.00 Inches (Ref. Id No.: 353536) [Free Shipping]

Unused Sears “Craftsman” Trammel Points in Original Box, No. 4061 – mjdtoolparts

A SET OF UNUSED “CRAFTSMAN” BRAND PRECISION TRAMMEL POINTS, No. 4016, by Sears, Roebuck & Company, Chicago, Illinois. These trammels have a precision screw adjuster to precisely regulate the positioning of the points. These trammels are in brand new, unused original condition in their original pasteboard box. Length = 5.50 Inches (Ref. Id No.: 472662) [Free Shipping]

Orig. Rosewood Hdl. for Sears Craftsman 5CBB Jack – Glue Repair – mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD REAR HANDLE for a Sears Craftsman brand No. 5CBB two-inch width jack plane by Sears, Roebuck & Company, Chicago, Illinois. Fully 95% of the original finishes and the full, original decal remain on this clean and usable handle, which has an early and nearly imperceptible glue repair to a crack about 1/3 of the way up from the bottom. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.38 Inches (Ref. Id No.: 389578) [Free Shipping]

Orig. Stained Hardwood Handle & Knob for Sears Dunlap No. 4DBB – mjdtoolparts

An ORIGINAL STAINED HARDWOOD FRONT KNOB AND REAR HANDLE for a Sears Dunlap brand No. 4DBB smooth plane by Sears, Roebuck & Company, Chicago, Illinois. Fully 95% of the original lacquer finish remains on these extra clean and ready to use handles. The original threaded rods to secure the handle and knob to the plane body are included as well. Length = 5.38 Inches (Ref. Id No.: 362675) [Free Shipping]

Craftsman Made Storage Box for Sears No. 3730 or Sargent No. 79 -mjdtoolparts

A CRAFTSMAN MADE HINGE-TOP STORAGE BOX for a Sears “Craftsman” brand filletster plane by Sears, Roebuck & Company, Chicago, Illinois. This box, which will also hold a disassembled Sargent No. 79 plane, which was the exact dimensions as the filletster planes produced for Sargent & Company for Sears. It is in excellent condition and could be put directly to use protecting a cast iron filletster plane from dust and exposure to moisture. Length = 11.00 Inches (Ref. Id No.: 473478) [Free Shipping]

Sears Roebuck & Co. Gluing Clamp Tool -No-96674 in Red Original Box 6674 Vintage

The Sears Roebuck & Co. Gluing Clamp Tool -No-96674 in Red Original Box 6674 Vintage is a collectible woodworking tool from the United States. This vintage original piece by Sears, Roebuck & Co. serves as a perfect addition to any woodworking enthusiast’s collection. Its unique design and red original box add to its charm as a piece of history in the world of carpentry and woodworking tools.

Vintage Sears Roebuck Drop Forged Clobbers Hammer (10 1/2″ Long)

The Vintage Sears Roebuck Drop Forged Clobbers Hammer is a rare collectible piece originating from the United States. With a length of 10 1/2 inches, this original vintage hammer from Sears Roebuck is a unique addition to any collection of vintage tools or hardware. Its distinctive brand and craftsmanship make it a valuable piece for woodworking enthusiasts or collectors alike.

Vintage Sears, Roebuck And Co Bench Plane # 9-37164 Made In England

The Vintage Sears, Roebuck and Co Bench Plane # 9-37164 is a rare and sought-after collectible tool made in England. This original vintage piece from the late 19th or early 20th century showcases the craftsmanship and quality of the renowned Sears, Roebuck and Co brand. With its classic design and country of origin, this bench plane is a must-have for woodworking enthusiasts and collectors alike.