S&H Mfg. Co Clinton, Wisconsin concrete edger cast iron tool. May wish to clean or restore or use for concrete work. Measures about 6″ across length of plate.
Archives
Proto 6-1/2″ Slip Joint Pliers 276-S USA Hose Clamp Slots.
Good used condition with normal signs of use and age. Tips have ground slot for hose clamps.
Armstrong 1236-S Angled 1-5/16″ Angled Open End Service Wrench USA Armaloy
Model: 1236-S ARMALOY. For your consideration is this ARMSTRONG 1-5/16″ Open End Wrench. Open End Service Wrench. Made in the USA. This Tool is in good used working condition.
Founder’s Grade Body for Millers Falls No. 14 Jack Plane-99% Japan- mjdtoolparts
A FOUNDER’S GRADE CAST IRON PLANE BODY for Millers Falls No. 14 jack plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 98% of the original black japan finish remains on this two-inch width plane body from the earliest days of the short-lived Millers Falls plane manufacturing enterprise. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. A great Instant Upgrade item. As good as they get. Length = 14.00 Inches (Ref. Id No.: 404141) [Free Shipping]
STANLEY R & L Vtg Woodworker’s 8″ Long Blade Sliding T Bevel , Pat’d 9-6-04, USA
Made by: Stanley Rule & Level Co..
Orig. Box for L.S. Starrett No. 93D T-Handle Tap Wrench – mjdtoolparts
An EXTRA CLEAN ORIGINAL PASTEBOARD BOX for an L.S. Starrett No. 93 D T-Handle Tap Wrench by the L.S. Starrett Company, Athol, Massachusetts. This box is in top condition, retaining its full, original paper label and having four intact corners on both the top and bottom section of the box. Length = 6.75 Inches (Ref. Id No.: 422493) [Free Shipping]
L.S. Starrett No. 281 American Standard Wire Gauge 0-36 AWG Made In USA
AS SHOWN
Banthrico Chicago USA U.S.A. Key
Banthrico Chicago USA U.S.A. Key
Sargent Hercules No. 1409 Iron Smoothing Hand Plane 1940s As Found As Is
Sargent Hercules No. 1409 Iron Smoothing Hand Plane 1940s. Needs a good cleaning.
Cramer Industrial Supply Hard Bound Catalog Vintage 1970s
Cramer Industrial Supply catalog from the 1970s. See pictures for condition. Thank you for looking.
Founder’s Grade Side Handle for Millers Falls No. 5 Hand Drill – mjdtoolparts
An original AUXILIARY SIDE HANDLE for a Millers Falls No. 5 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. frequently. This frequently missing, damaged or degraded drill component is in excellent condition and could be put directly to use. Length = 2.25 Inches (Ref. Id No.: 452256) [Free Shipping]
Vtg. 10″ Westcott No. 80 S-Curved Adjustable Wrench Keystone Mfg. Buffalo, N.Y.
This tool is a classic piece from the United States and has not been modified. Perfect for both display and practical use, this adjustable wrench is a valuable addition to any tool collection.
Orig. Straight Fence for Stanley No. 66 Scratch Beader – “S” Cast – mjdtoolparts
An ORIGINAL STRAIGHT FENCE FOR A NO. 66 SCRATCH BEADER by STANLEY. This often-missing part is in excellent condition. The inside of the casting is finished with black japanning and it has the early “S” casting mark on the inside of the fence. Length = 1.25 Inches (Ref. Id No.: 441524) [Free Shipping]
CRAFTSMAN GUARANTEED HIGHEST QUALITY TOOL BOX EMBLEM REGISTERED U.S. PAT. OFF.
From a Craftsman Tool Box. Made of aluminum.
2 Vintage Kraeuter Lineman’s Wire & Cable Pliers 8″ # 1380-8 & 7″ 1830-7 USA
IMPORTANT NOTES: >>> I do a lot of deceased persons estates, and can not ask the deceased what their personal habits, lifestyles, etc. were. Yes, I was shot in the face when I was a child.
Vintage Sargent & Co Heavy Duty Hole Punch, Made In The U.S.A. New Haven Conn
Has wear marks from age as seen in pictures.
Vintage SKS Double Cylinder Foot Pump From West Germany 80s. Rare Item
This vintage SKS double cylinder foot pump from West Germany in the 80s is a rare and collectible item. Made of metal, this foot pump is a unique piece of mechanical tool history, manufactured by SKS Germany. Its design and craftsmanship make it a sought-after item for collectors of vintage tools and memorabilia. Its rarity and historical value add to its appeal as a valuable addition to any collection. **not fully tested put my hand over the valve pumped it & the pressure goes up little bit. Half way from 0-1. So with this in mind being sold as spares or repairs**
Founder’s Grade 13/16″ Russell Jennings Auger Bit- Old Hdwe. Stock- mjdtoolparts
A FOUNDER’S GRADE STANLEY “RUSSELL JENNINGS” BRAND 13/16″ SIZE SPIRAL TWIST AUGER BIT by STANLEY. This auger is in original factory condition in its original waxed paper wrapping. It is marked on the shaft with the designation “13/16”. As good as they get. Length = 9.00 Inches (Ref. Id No.: 406783) [Free Shipping]
Vintage Salter Pocket Balance Scale No.3~Brass Face Plate~25lb~England~1930s
1920s antique DENT REFRIGERATOR HARDWARE CATALOG fullerton pa illustrated VGC
Very good condition for age with just light antique wear. Beautiful early reference book.
Vintage M. Klein & Sons Haven’s Cable Grip Puller Porkchop Wire Stretcher Tool
No structural cracks or breaks.
Axe Old Vintage 1950ts Fireman’s Axe 6 Lb Head 35 Inch Handle In Great Shape
The product is a vintage fireman’s axe with a 6 lb head and a 35 inch handle, manufactured in the 1950s by the brand Plumb. Or council this collectible tool is a unique piece for woodworking and carpentry enthusiasts, known for its sturdy quality and historical significance. With a vintage original design, this axe is a valuable addition to any tool collection or for those looking to reenact the craftsmanship of the mid-20th century. Only markings is the 6 lb stamp. This was on the Whitneyville Maine fire department truck. Close to 70 years handles in good shape. However, shipping is three or four times the price with the handle so if you want I will remove it to drop the shipping to $12
VINTAGE 1800S MILLER LOCK CO IRON PADLOCK LOCK
SHOWS USAGE WEAR.
Founder’s Grade Front Knob for Stanley No. 386 Jointer Gauge – mjdtoolparts
A FOUNDER’S GRADE TURNED ROSEWOOD FRONT KNOB AND FIXING SCREW for a Stanley No. 386 jointer gauge by STANLEY. This frequently damaged or degraded part is in absolutely perfect, unused condition and could be put directly to use. Length = 2.00 Inches (Ref. Id No.: 389405) [Free Shipping]
Vintage Akron Brass Style 10 Fireman’s Spanner Wrench 3551/2
Vintage Akron Brass Style 10 Fireman’s Spanner Wrench 3551/2. Condition is Used. Shipped with USPS Ground Advantage.