A FOUNDER’S GRADE CAP for a later type Stanley No. SB-4 English made No. 4 size plane by Stanley Tools, Sheffield, England. This cap, which is in unused condition, retains fully 99% of its original black japan finish and the original Stanley label on the top. Length = 5.25 Inches (Ref. Id No.: 473469) [Free Shipping]
Archives
Orig. Plane Body for Stanley, England No. SB 4 Smooth Plane – mjdtoolparts
An ORIGINAL CAST IRON PLANE BODY for a Stanley No. SB4 later type smooth plane by Stanley Tools, Sheffield, England. Fully 98% of the original blue japan finish remains on this unused plane body. As good as they get. Length = 9.25 Inches (Ref. Id No.: 473472) [Free Shipping]
Orig. Composite Handle/Knob for Stanley No. SB4 Smooth Plane – mjdtoolparts
BOTH ORIGINAL COMPOSITE HANDLES for a later type Stanley No. SB4 smooth plane by Stanley Tools, Sheffield, England. The original screws to secure the handle and knob to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 473470) [Free Shipping]
Orig. Plane Body for Stanley No. 13-050 Combination Plane – 98% – mjdtoolparts
An ORIGINAL PLANE BODY for a later type Stanley No. 13-050 combination plane by Stanley Tools, Sheffield, England. This unused plane body, which retains 99% of its original nickel plating, is complete with the original slitting cutters and it is in ready to use condition. Length = 9.00 Inches (Ref. Id No.: 468488) [Free Shipping]
Cutter Beading Stop for Stam;eu No. 13-050 Combination Plane – mjdtoolparts
An ORIGINAL BEADING STOP for a Stanley later type No. 13-050 combination plane by Stanley Tools, Sheffield, England. This frequently missing, damaged or degraded plane component is in essentially unused condition and could be put directly to use. Length = 4.88 Inches (Ref. Id No.: 468489) [Free Shipping]
Stanley Irons for spare parts No. 13-050 Combination Plane
18 x Stanley irons as seen. We are only human but will make every effort to resolve any problem that may arise. Quality used item with a few marks here and there check out the photos for sizes and condition.
Orig. 1 5/8″ Iron for English Stanley H1247 Handyman Block Plane – mjdtoolparts
An ORIGINAL 1 5/8″ WIDTH CUTTING IRON for a Stanley “Handyman” brand No. H1247 block plane by Stanley Tools, Sheffield, England. This cutting iron is in unused, original condition and could be put directly to use restoring a Stanley No. H1247 block plane. Length = 4.00 Inches (Ref. Id No.: 470668) [Free Shipping]
468015Orig. 3/16″ Tongue Iron for Stanley No. 13-050 Plane-Fits #45 – mjdtoolpar
An ORIGINAL 3/16″ SIZE TONGUE CUTTING IRON for a later type Stanley No. 13-050 combination plane by Stanley Tools. This cutter, which is identical to those used in the Stanley No. 45 and No. 55 planes is in unused condition and could be put directly to use. It will also work in the Record No. 405 combination plane and the Large Combination Plane produced by Lee Valley Tools of Ottawa, Ontario, Canada. Length = 3.50 Inches (Ref. Id No.: 468463) [Free Shipping]
Orig. Corrugated Corner Box for Stanley No. 271 Router Plane – mjdtoolparts
An ORIGINAL PASTEBOARD BOX for No. 271 router plane by Stanley Tools, Sheffield, England. The full, original paper label remains on this box as does the original Stanley waxed paper packing material. Length = 3.38 Inches (Ref. Id No.: 397510) [Free Shipping]
Founder’s Grade Body for Stanley No. 151 English Spokeshave -99% – mjdtoolparts
A FOUNDER’S GRADE UNUSED ORIGINAL BODY for a Stanley No. 151 double adjustable spokeshave by Stanley Tools, Sheffield, England. The two adjusting screws are included with this old hardware stock body, which has the flat, non-radiused sole facing. Fully 99% of the original black japan finish remains on this Instant Upgrade item. If you have a damaged or degraded Stanley No. 151, this unused body will make it infinitely better. As good as they get. Length = 10.00 Inches (Ref. Id No.: 390385) [Free Shipping]
Founder’s Grade Cap for Stanley No. 151 Spokeshave – England – mjdparts
A FOUNDER’S GRADE SCREW LOCK CAP AND TENSIONING SCREW for a Stanley No. 151 double adjustable spokeshave by Stanley Tools, Sheffield, England. This cap, which has a polished finish, will also fit U.S.A. made versions of the No. 151. As good as they get. Length = 2.38 Inches (Ref. Id No.: 449971) [Free Shipping]
Orig. Stanley Spokeshave Iron No. 151 or 152 – Made in England – mjdtoolparts
An ORIGINAL AND UNUSED CUTTING IRON for a Stanley No. 151 or No. 152 spoke shave by Stanley Tools, Sheffield, England. This old hardware stock item is marked with Stanley’s Notched Rectangle trademark. The blade is in unused condition. It measures 2 1/8 inches in width. This blade will fit both early and later models of the No. 151 spokeshave and could be put directly to use. Length = 2.13 Inches (Ref. Id No.: 341564) [Free Shipping]
Founder’s Grade English Stanley No. 12-204 Body/Frog No. 4 Size – mjdtoolparts
A LATER TYPE ENGLISH MADE BODY AND FROG MECHANISM for a Stanley No. 12-204 two-inch width smoothing plane by Stanley Tools, Sheffield, England. Fully 99% of the original finishes remain on this body, which is in unused, original factory condition. Length = 8.50 Inches (Ref. Id No.: 440436) [Free Shipping]
Founder’s Grade Iron/Chip Brkr. for Eng. Stanley No. 12-204 Plane – mjdtoolparts
A FOUNDER’S GRADE 2″ WIDTH CUTTING IRON AND CHIP BREAKER for a Stanley later type smoothing plane, No. 12-204, by Stanley Tools, Sheffield, England. unused condition. The cutter and chip breaker are in unused original condition, retaining fully 99% of their original finish. The original screw to secure the chip breaker to the cutting iron is included as well. As good as they get. Length = 7.50 Inches (Ref. Id No.: 440440) [Free Shipping]
Founder’s Grade Hdls./Screws for English Stanley No. 12-204 Plane – mjdtoolparts
A FOUNDER’S GRADE FRONT KNOB AND REAR HANDLE for a later type Stanley No. 12-204 smoothing plane (No. 4 size equivalent) by Stanley Tools, Sheffield, England. These hard plastic handles are in unused, original condition and include the original screws to secure them to the plane body. Length = 4.50 Inches (Ref. Id No.: 440438) [Free Shipping]
Founders Grade 15/16″ Jennings Auger Bit-Stanley, Sheffield,England-mjdtoolparts
A FOUNDER’S GRADE STANLEY “RUSSELL JENNINGS” BRAND 15/16″ SIZE SPIRAL TWIST AUGER BIT by Stanley Tools, Sheffield, England. This auger is in original unused, hardware store condition. It is marked on the shaft with the designation “15/16” and the “Russell Jennings” name. As good as they get. Length = 9.25 Inches (Ref. Id No.: 402103) [Free Shipping]
Orig. Cutting Iron English Stanley No. 75 Bullnose Plane Fits U.S.-mjdtoolparts
An ORIGINAL CUTTING IRON for a Stanley No. 75 bullnose block plane by Stanley Tools, Sheffield, England. This unused old stock cutting iron was produced in England, but it will work with the American made versions of the No. 75 bullnose block plane as well. It is in unused hardware store condition and could be put directly to use. Length = 3.50 Inches (Ref. Id No.: 358138) [Free Shipping]