Archives

Nice replacement part.

Original 2 1/8″ Lever Lock Cap for Chaplin’s Improved Patent No. 1207 Plane In good solid condition, hasn’t been cleaned. It has some patina and rust. A decent amount of nickel plating still intact. 2-1/8” wide. Will make a great replacement part Please see photos as they are a part of the description. If you have any questions do not hesitate to ask. Thank you for looking! I will combine shipping on multiple purchases, so look through my listings and see if there is anything else you want or need.

An ORIGINAL BEECH REAR HANDLE for a Chaplin’s Patent transitional plane, No. 81, by Tower & Lyon, New York, New York. This handle has a sliver missing from the side of the tote “horn”, but it is otherwise in excellent condition. The original threaded rod and brass nut to secure the handle to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 424105) [Free Shipping]

An ORIGINAL TURNED BEECH FRONT KNOB for a Chaplin’s Patent No. 75 transitional smoothing plane by Tower & Lyon, New York, New York. The original wood screw secure the knob to the plane body is included as well. Length = 1.75 Inches (Ref. Id No.: 428460) [Free Shipping]

An ORIGINAL 2″ WIDTH CUTTING IRON for a Chaplin’s Patent No. 74 or No. 75 transitional plane by Tower & Lyon, New York, New York. This clean and ready to use iron is clearly marked with patent information and the Tower & Lyon name at the top. Length = 7.00 Inches (Ref. Id No.: 473104) [Free Shipping]

An ORIGINAL TWO INCH WIDTH CUTTING IRON AND CHIP BREAKER for a Chaplin’s Patent No. 74 or No. 75 handled transitional smoothing plane by Tower & Lyon, New York, New York. The original chip breaker and the screw to secure the chip braker to the plane iron are included as well. Length = 6.50 Inches (Ref. Id No.: 380270) [Free Shipping]

An ORIGINAL SCREW LOCK CAP for a Chaplin’s Patent No. 74 or No. 75 transitional plane by Tower & Lyon, New York, New York. This two-inch width cap is in excellent condition, retaining much of its original nickel plating, which has dulled over time. The underside is cast with the designation “92”. A tough part to find in this condition. Length = 5.50 Inches (Ref. Id No.: 380271) [Free Shipping]

An ORIGINAL CAST IRON FRAME AND FROG MECHANISM for a Chaplin’s Patent No. 81 transitional plane by Tower & Lyon, New York, New York. Fully 90% of the original black japan finish remains on this frequently damaged or degraded plane component. The original screws to secure the frame and frog to the plane body are included as well. Length = 13.50 Inches (Ref. Id No.: 424103) [Free Shipping]

An ORIGINAL BEECH REAR HANDLE for a Chaplin’s Patent transitional plane, No. 75, by Tower & Lyon, New York, New York. This handle has a large chip missing from the side of the tote spur and a chip from the base. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.25 Inches (Ref. Id No.: 473106) [Free Shipping]

An ORIGINAL SCREW LOCK CAP for a No. 15 Chaplin’s Patent block plane by Tower & Lyon, New York, New York. This cap is designed for use with the No. 15 plane, which uses a 1 5/8 inch cutting iron. Most of the paint is missing, but the part is sound and intact and is offered for restoration. Length = 4.00 Inches (Ref. Id No.: 473973) [Free Shipping]

An ORIGINAL TURNED BEECH FRONT KNOB for a Chaplin’s Patent No. 81 transitional smooth plane by Tower & Lyon, New York, New York. Most of the original lacquer finish remains on this knob. The original wood screw to secure this knob to the plane body is included with the knob. Length = 1.75 Inches (Ref. Id No.: 424104) [Free Shipping]