Vtg EAGLE Lock Company Key 22U6 Steamer Trunk Footlocker Chest Cabinet Antique

This listing is for ONE (1) Antique, factory cut KEY, as follows: Manufacturer: Eagle Lock Company of Terryville, CT Key Code: 22U6 (22-U6, 22U-6) Designed for: Eagle Lock Company locks – Various Trunks, Cabinets, Chests, Footlockers. Material: Steel Size: Length: 1.72″, Bow Width: .80″, Blade Width: .36″, Blade Thickness: .075″ This is an original, antique key designed for use with various Eagle locks. The keys are from a collection of NEW, UNUSED old key stock that was stored away decades ago. Although the keys have never been used they do have general surface wear and minor rust spotting from long term storage. They also have quite a few scratches on the reverse side from the cutting process. Please view the photos for a better look at this nice, collectible key. We have several of these available, all in comparable condition to the one shown. Our current inventory is shown in the last two photos. You will receive one of these keys, no surprises! Also be sure to view our other listings, since we may have something else that interests you. We do have other key lots currently listed, so be sure to take a look! Normal 0 false false false EN-US X-NONE X-NONE *This key will only work on locks that have the same key code. The code is often located on the actual lock case or hardware near the lock and magnification may be required. If you are looking for a spare key, you can carefully compare the design, size and cuts of the key being offered with the key in your possession.

2 Original EXCELSIOR Flat Key 5989 Antique Trunk Chest Vtg Footlocker Locks

This listing is for 2 (two) Vintage, factory cut KEYS, as follows: Manufacturer: Excelsior Hardware Company of Stamford, CT Key Code: 5989 Designed for: Excelsior locks – Various Trunks, Cabinets, Chests, Footlockers, Lock Box. Material: Steel Size: Length: 1.65″, Bow Width: .90″, Blade Width: .33″, Blade Thickness: .05″ *These original pieces were produced by Excelsior Hardware Co before they went our of business and are stamped as such. They will be the original match for your old Excelsior 5989 lock. The keys are NEW, UNUSED stock produced many years ago. They are in excellent, clean condition overall and were taken from a recently opened factory box. They may have a minor scuff or scratch but no filth, rust, pitting or ugliness! Please review the photos for a better look at this nice, collectible pair. Also be sure to view our other listings, since we may have something else that interests you. We do have other key lots currently listed, so be sure to take a look! Normal 0 false false false EN-US X-NONE X-NONE *This key will only work on locks that have the same key code. The code is often located on the actual lock case or hardware near the lock and magnification may be required. If you are looking for a spare key, you can carefully compare the design, size and cuts of the key being offered with the key in your possession.

Vtg EAGLE Lock Company Key 56V1 Steamer Trunk Footlocker Chest Cabinet Antique

This listing is for ONE (1) Antique, factory cut KEY, as follows: Manufacturer: Eagle Lock Company of Terryville, CT Key Code: 56V-1 Designed for: Eagle Lock Company locks – Various Trunks, Cabinets, Chests, Footlockers. Material: Brass plated steel (magnetic) Size: Length: 1.74″, Bow Width: .80″, Blade Width: .36″, Blade Thickness: .075″ This is an original, antique key designed for use with various Eagle locks. The keys are from a collection of NEW, UNUSED old key stock that was stored away decades ago. Although the keys have never been used they do have general surface wear and blemishes from long term storage. We have several of these available, all in comparable condition to the one shown here. Be sure to view our other listings, since we may have something else that interests you. We do have other key lots currently listed, so be sure to take a look! *We have hundreds of keys and blanks that are not currently listed. We do have others in the Eagle 56V Series so if you are looking for a particular key code, please send us a message and we will check our inventory! Normal 0 false false false EN-US X-NONE X-NONE *This key will only work on locks that have the same key code. The code is often located on the actual lock case or hardware near the lock and magnification may be required. If you are looking for a spare key, you can carefully compare the design, size and cuts of the key being offered with the key in your possession.

Vtg EAGLE Lock Company Key 22U5 Steamer Trunk Footlocker Chest Cabinet Antique

This listing is for ONE (1) Antique, factory cut KEY, as follows: Manufacturer: Eagle Lock Company of Terryville, CT Key Code: 22U5 (22-U5, 22U-5) Designed for: Eagle Lock Company locks – Various Trunks, Cabinets, Chests, Footlockers. Material: Steel Size: Length: 1.72″, Bow Width: .80″, Blade Width: .36″, Blade Thickness: .075″ This is an original, antique key designed for use with various Eagle locks. The keys are from a collection of NEW, UNUSED old key stock that was stored away decades ago. Although the keys have never been used they do have general surface wear and minor rust spotting from long term storage. They also have quite a few scratches on the reverse side from the cutting process. Please view the photos for a better look at this nice, collectible key. We have several of these available, all in comparable condition to the one shown. Our current inventory is shown in the last two photos. You will receive one of these keys, no surprises! Also be sure to view our other listings, since we may have something else that interests you. We do have other key lots currently listed, so be sure to take a look! Normal 0 false false false EN-US X-NONE X-NONE *This key will only work on locks that have the same key code. The code is often located on the actual lock case or hardware near the lock and magnification may be required. If you are looking for a spare key, you can carefully compare the design, size and cuts of the key being offered with the key in your possession.

Vtg Unique Double Bit Stamped Steel Key No 1156 For Old Padlock Trunk Oddity

Size:Length: 1.80″, Bow Width.97″, Blade Width.56″, Blade Thickness.08-.10″. Designed for:Trunk locks, footlockers, lock boxes, Padlocks, various other uses. Material:Stamped Steel. We have five of these available, all in comparable condition to the one shown.You will receive a key from the group captured in the last photo, no surprises.

Vtg Key D60 LONG Mfg Company Atkinson Long EVERLASTING Trunk Footlocker D-60

This listing is for ONE (1) Vintage, factory cut KEY, as follows: Manufacturer: Long Manufacturing Company of Petersburg, VirginiaKey Code: D60, D-60 Designed for: Atkinson & Long, Long Mfg Co “Everlasting” Trunk locks, footlockers, lock boxes, various other uses. Material: Stamped Steel with FLAT Blade. Size: Length: 1 11/16″, Bow Width: 1″, Blade Width: 3/8″, Blade Thickness: .06″ These are original, vintage keys designed for use with various Atkinson & Long (A&L) locks. The keys are from a collection of UNUSED old key stock produced many decades ago. They do have some light scratches and surface blemishes from age and storage. The stamping is not uniform but they are original, factory keys. The last photo shows our inventory at the time of listing. You will receive a key from this group, no surprises! Please review the photos for a better look at this nice, collectible key. Also be sure to view our other listings, since we may have something else that interests you. We do have other key lots currently listed so be sure to take a look! Normal 0 false false false EN-US X-NONE X-NONE *This key will only work on locks that have the same key code. The code is often located on the actual lock case or hardware near the lock and magnification may be required. If you are looking for a spare key, you can carefully compare the design, size and cuts of the key being offered with the key in your possession.

2 Vtg C-11 Keys Atkinson & Long Mfg – LONG Lock Co For EVERLASTING Trunk Locks

This listing is for a lot of TWO (2) Vintage, factory cut KEYS, as follows: Manufacturer: Atkinson & Long Manufacturing Company of Petersburg, VirginiaKey Number: C-11Key Code: C-11 Designed for: Atkinson & Long, Everlasting Trunk locks Material: Nickel Silver Size: Length: 2 1/16″, Bow Width: 7/8″, Blade Width: 1/4″, Blade Thickness: 5/64″ These are old, vintage keys designed for use with various Atkinson & Long (A&L) Everlasting Trunk locks. They are in nice, clean condition overall. They are in nice, clean condition overall. They have a few spots and a darkened, natural patina but no ugly corrosion, pitting, etc. They will polish up nicely is you choose to clean them up! All of the keys being offered are in comparable condition and the last photo shows our inventory. You will receive keys from this group, no surprises. *We also have a brass version of this key available (ILCO brand). Please check our other listings for current availability. Please review the photos for a better look at these nice, collectible keys. Also be sure to view our other listings, since we may have something else that interests you. We do have other key lots currently listed so be sure to take a look! Normal 0 false false false EN-US X-NONE X-NONE *This key will only work on locks that have the same key code. The code is often located on the actual lock case or hardware near the lock and magnification may be required. If you are looking for a spare key, you can carefully compare the design, size and cuts of the key being offered with the key in your possession.

Vintage Yale Metal Trunk Lock TS 249 Army Green W/ Keys & Rivets NOS

New old stock with original box which does have some damage there is also a little bit of rust on the back of the lock plate. See pictures for details of condition. Comes with everything seen in pictures the rivets are in the envelope Thanks for looking to check out my page or follow for more related content

Vintage Yale Metal Trunk Lock TS 249 Army Green W/ Keys & Rivets NOS

The Vintage Yale Metal Trunk Lock TS 249 in Army Green is a rare find from the United States, featuring the original keys and rivets. This collectible lock is a unique piece of history that adds character to any vintage or antique collection. With its sturdy construction and authentic design, this trunk lock is a valuable addition to any lock enthusiast’s collection.