Orig. Knob/Hdl. for V. & B. No. 805 “Lincoln” Brand Jack Plane – mjdtoolparts

An ORIGINAL WALNUT FRONT KNOB AND REAR HANDLE for a Vaughn & Bushnell No. 805 “Lincoln” jack plane by the Vaughn & Bushnell Company, Chicago, Illinois. These handles are in top condition and could be put directly to use restoring a “Lincoln” Series V. & B. plane. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 390174) [Free Shipping]

Orig. Body for V. & B. No. 805 “Lincoln” Brand Jack Plane – 2″ – mjdtoolparts

An ORIGINAL FORGED IRON BODY for a Vaughn & Bushnell “Lincoln” No. 805 jack plane by the Vaughn & Bushnell Company, Chicago, Illinois. This plane body, which is designed for use with a 2″ width cutting iron, is in top condition, retaining fully 95% of its original black japan finish. It is absent any chips, cracks or other apologies. Length = 13.63 Inches (Ref. Id No.: 390176) [Free Shipping]

Founder’s Grade Frog for V. & B. “Lincoln” No. 805 Jack Plane – mjdtoolparts

A FOUNDER’S GRADE FROG MECHANISM for a Vaughn & Bushnell No. 805 “Lincoln” brand jack plane by the Vaughn & Bushnell Company, Chicago, Illinois. The V. & B. planes used a frog mechanism nearly identical to that used on Stanley’s “Bedrock” planes. This example for the middle grade “Lincoln” line of V. & B. planes is in unused condition, retaining fully 98% of its original black japan finish. The original screws and washers to secure the frog mechanism to the plane body are included as well. As good as they get. Length = 7.25 Inches (Ref. Id No.: 390175) [Free Shipping]

Orig. Lever Cap for V. & B. Vanadium No. 805 “Lincoln” Jack Plane – mjdtoolparts

An ORIGINAL LEVER CAP for a Vaughn & Bushell No. 805 “Uncle Sam” brand jack plane by the Vaughn & Bushnell Company, Chicago, Illinois. This extra clean two-inch width lever cap has a smooth finish on the face as was the standard for early versions of the No. 805. It is in excellent condition and could be put directly to use. Length = 5.13 Inches (Ref. Id No.: 390177) [Free Shipping]

Orig. Forged Iron Body for V. & B. “Uncle Sam” No. 704 Plane – mjdtoolparts

An ORIGINAL FORGED IRON PLANE BODY for Vaughn & Bushnell No. 703 “Uncle Sam” brand smooth plane by the Vaughn & Bushnell Company, Chicago, Illinois. This most unusual plane body is in excellent collector quality condition, retaining 95% of its original black japan finish. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 390520) [Free Shipping]

Orig. Frog Mechanism for V. & B. Vanadium No. 908 Plane – Screws – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Vaughn & Bushnell No. 908 “Vanadium” twenty-four inch length jointer plane by the Vaughn & Bushnell Company, Chicago, Illinois. This frog, which is similar to Stanley’s early Bedrock frog, is in top condition and could be put directly to use. It is designed for use with a cutting iron measuring 2 5/8″ in width. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.25 Inches (Ref. Id No.: 383370) [Free Shipping]

Orig. Front Knob & Rear Handle for V. & B. No. 908 Jointer Plane – mjdtoolparts

An ORIGINAL WALNUT FRONT KNOB AND REAR HANDLE for a Vaughn & Bushnell No. 908 “Vanadium” jointer plane by the Vaughn & Bushnell Company, Chicago, Illinois. These handles are in top condition, noting a sliver of wood missing from one side of the tote “horn” and could be put directly to use restoring a top of the line V. & B. plane. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 383371) [Free Shipping]

Orig. Front Knob & Rear Handle for V. & B. No. 907 Jointer Plane – mjdtoolparts

An ORIGINAL WALNUT FRONT KNOB AND REAR HANDLE for a Vaughn & Bushnell No. 907 “Vanadium” jointer plane by the Vaughn & Bushnell Company, Chicago, Illinois. These handles are in top condition and could be put directly to use restoring a top of the line V. & B. plane. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 388465) [Free Shipping]

Founder’s Grade Frog for V. & B. Vanadium No. 907 Plane – Screws – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Vaughn & Bushnell No. 906 “Vanadium” fore plane by the Vaughn & Bushnell Company, Chicago, Illinois. This 2 3/8″ width frog, which is similar to Stanley’s early Bedrock frog, is in top condition and could be put directly to use. It will also work with the V. & B. No. 907 jointer plane. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.25 Inches (Ref. Id No.: 388463) [Free Shipping]

Orig. Walnut Hdl./Knob for V. & B. No. 703 “Uncle Sam” Smooth Plane-mjdtoolparts

An ORIGINAL WALNUT FRONT KNOB AND REAR HANDLE for a Vaughn & Bushnell No. 703 “Uncle Sam” brand smoothing plane by the Vaughn & Bushnell Company, Chicago, Illinois. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.25 Inches (Ref. Id No.: 431811) [Free Shipping]

Orig. 2″ Cutting Iron & Chip Breaker for V. & B. Vanadium No. 905- mjdtoolparts

An ORIGINAL TWO INCH WIDTH CUTTING IRON AND CHIP BREAKER for a Vaughn & Bushnell No. 904 Vanadium brand smooth plane by the Vaughn & Bushnell Company, Chicago, Illinois. Both are in excellent condition and could be put directly to use. This iron and chip breaker will also fit the V. & B. No. 905 Vanadium jack plane as well as Stanley, Sargent and Millers Falls planes that require a two inch cutting iron. The Vanadium line featured cutting irons formed from pure Vanadium steel. Length = 7.50 Inches (Ref. Id No.: 376509) [Free Shipping]

Vaughan SBP5 5 oz. Magnetic Tack Hammer Bill Poster’s Hickory Handle

The Vaughan SBP5 5 oz. Magnetic Tack Hammer is a high-quality tool designed for carpenters, woodworkers, and bill posters. With a hickory handle for durability and a magnetic tack to easily drive tacks into various materials, this hammer is a reliable choice for professionals and DIY enthusiasts alike. The Vaughan brand ensures a tradition of craftsmanship and quality, making this hammer a valuable addition to any toolbox.

VAUGHAN “SPRING EYE” HICKORY 13″ FRAMING CLAW HAMMER ~ No. 999 ~ original

The product is a vintage Vaughan “Spring Eye” hickory 13.25″ framing claw hammer, specifically model number 999. Made in the United States, this original piece is a collectible tool perfect for woodworking and carpentry enthusiasts. With its high-quality construction and rich history, this hammer is a valuable addition to any toolbox or collection.

(2)-Vaughan 19″ Curved Hickory Wood California Framing Hammer Handle 65182

(2)-Vaughan 19″ Curved Hickory California Framing Hammer Handle 65182 Vaughan Hammer HandleWood replacement handle for California Framing hammers.SpecificationDescriptionTypeFraming HammerLength19 In.Handle TypeCurvedMaterialHickoryEye Size23/32 In. x 1-1/2 In.Purchase is for (2)-Vaughan 19″ Curved Hickory California Framing Hammer Handle.All items listed have shipping for the Continental United States. For AK, HI, PR, APO/AFO and other Countries please check with us about the cost of shipping before ordering. We do our best to ensure the accuracy of every listings. Unfortunately, do to our high volume, mistakes sometimes occur. If you receive an item that is not as described in our listing, please contact us directly via phone or email within three (3) days of receiving the item and we will work to correct the issue.