All three{3}chisels, show use and wear, with good edges, which will respond well to honing and sharpening by a experienced hand.
Archives
3 Vntg Bevel Edge Tang Chisels,Incl. 3/4″ & 1/2″ Sears & 3/4″ Stanley Handyman
All three{3} chisels are in very good overall condition, showing normal use and wear, and all will need varying degrees of basic honing and sharpening by a experienced hand. One{1} 3/4″ X 7-1/16″, signed “Stanley Handyman No.
6 Fuller Bevel Edge Tang Chisels,,Incl. 2 Each 1″, 3/4″ & 1/2″,VGC,L@@K! & READ!
All six{6} } chisels will require varying degrees of basic honing and sharpening by a experienced hand.
VTG LUFKIN # X46 and STANLEY # 35-106 Zig Zag Folding Rules 6′ Long VERY NICE
LUFKIN # X46 and STANLEY # 35-106. These models are in great condition and have only been lightly used, with minimal wear on the paint and joints. One is a Lufkin extension rule, while the other is a Stanley without an extension.
3 Stanley No. 60 Bevel Edge Tang Chisels,2″ X 8-3/4″,1″ X 7-3/16 & 1/2″ X 7-1/4″
All three{3} chisels will require varying degrees of basic honing and sharpening by a experienced hand. One{1} 2″ X 8-3/4″, signed “Stanley No. 60 Made In U.S.A.”, with a slightly rough edge, as shown in the 4th-7th pictures.
6 Vntg Wood Handle Tang Chisels,Incl {5} Bevel Edge,Eversharp,Monarch,Corsair,VG
All six{6}}chisels, show use and wear, and all edges will need honing and sharpening by a experienced hand. <<<<< {pictures 7-11}.
4 Stanley Bevel Edge Tang Steel Cap Chisels,No. 60 Type,& BONUS Stanley,L@@K!
All five{5} chisels will require varying degrees of basic honing and sharpening by a experienced hand. One{1} 1″ wide X 8-11/16″ long, with a good edge, with the Stanley information worn off {likely a No. 60 type{??}.
B&C C-Clamp 143 3″ USA, VINTAGE EE
This 3″ C-clamp is a collectible piece for woodworking enthusiasts and professionals alike.
Vintage Brink & Cotton C-Clamp 143 3″ USA
Used