Greenlee 1-1/4″ Short Power Auger Bit Unispur .435 Hex Shank (will fit 1/2″ chuck) 3-1/2″ Twist Length 6-3/4″ Overall Length Order No. 500 0267.8 NEW USA
Archives
Black & Decker Self Feed Wood Boring Bit 2 1/4in. NOS New In The Box B & D Tool
There is a small amount of surface rust that will clean up good. Black & Decker Self Feed Wood Boring Bit 2 1/4″ New In Box. If there is a problem, let’s talk it out. Most everything can be resolved through communication.
21 Piece Vintage Craftsman Power Wood Boring Bit Set with Wrench 1/4″ to 1-1/4″
Another item from Country Artifacts, Great Northern Liquidation, Springfield, Vermont. 21 Piece Vintage Craftsman Power Wood Boring Bit Set with Wrench 1/4″ to 1-1/4″The complete original set included in this lot has had extra pieces added by the previous owner (they all fit in the case), so that this larger set now includes the following parts:(1) plastic case, yellow with clear cover, branded, scratched as shown(1) booklet inset in underside of the case: How to get the most out of your 10 piece Craftsman Wood Boring Bit Set, note the old logo style introduced in the 1930’s (I think).(1) holding tool(1) wrench(2) 1-1/4″(1) 1-1/8″(2) 1″(2) 7/8″(2) 3/4″(2) 5/8″(2) 1/2″(2) 3/8″(2) 1/4″This set is used with some oxidation from age and sitting idle for years. The parts all look usable. I found that the bits I tested mounted to the tool without any trouble as shown.Unpacked weight & size: 11.5ozPacked weight & size: 15ozPackage Notes & Ref: 1G23, 49.99s:Note: Unless specifically indicated otherwise, the shipping charge quoted is to addresses in the contiguous 48 United States. Please email for a shipping quote to Alaska, Hawaii, US territories, and international destinations. This particularly applies if the shipping charge is zero ($0).:If for any reason you are unsatisfied with your purchase, I offer a money back guarantee. This can be a full or partial refund (depending on the severity of the problem). In many cases you may not even need to return it. Please contact me through eBay’s messaging service with a description of the issue and I will respond as soon as I see it.:Please also note that my liability for product defects is limited to the purchase price plus shipping. I am not responsible for the installation, training in the use of, or operation of any item I sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product.:We appreciate your business. Our Standard Shipping method is our choice of USPS, FedEx or Motor Freight. Unfortunately, because we have very limited space, we cannot store your purchased items for you. For local pickup, we can hold your item for two weeks (or as agreed upon beforehand in writing) from the purchase date, after which we have to charge storage, up to $10 per day, depending on the situation. Once storage fees exceed any moneys paid, we will have to relist the item without refund.
VTG Norfolk Screw-Sink 1 1/4 x #8 Boatbuilders Countersink Bit NOS Circle Sink
Vintage Norfolk Screw-Sink 1 1/4” x #8 Boatbuilders Countersink Bit NOS Circle Sink SEE DETAILED PICTURES Here is a rare find a Vintage Norfolk Circle Sink Screw-Sink Boatbuilders Countersink Drill Bit New In the original package unused. Won in an old hardware store auction. Used in woodworking to Drill Countersink And Counterbore all in one operation. A long discontinued product. Still used in the boatbuilding world. 1 sizes included 1 – 1 1/4” x #8 WATCH MY LISTINGS I HAVE MORE OF MANY DIFFERENT SIZES WHICH I WILL BE LISTING SOON ANY QUESTIONS JUST ASK GOOD LUCK AND HAPPY BIDDING
Set Of 5 Plug Cutter Woodworking Set w/ Holder 5/8–1-1/4 Vintage USA
Designed for creating clean, precise wood plugs, dowels, and joinery work, this set is perfect for woodworking professionals and DIY enthusiasts. joinery tools. woodworking drill bits. wood plug cutter.
Vtg Black & Decker No 704 Electric Drill Type W 5/16” Heavy Duty Tool
For your consideration is a vintage Black & Decker No 704 Electric Drill Type W 5/16” Heavy Duty Tool. This drill runs well and is in good condition. Thank you for your interest.
4″ Cross Drill Press Vise Slide Milling 2 Way Clamp Machine Heavy Duty
Feature: Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. .
Egg Beater Hand Drill Unmarked – Possible Stanley Defiance – Red Gear 11-1/4″
This is a classic egg‑beater style hand drill with a red gear wheel and turned wooden handle. Red gear wheel with classic early‑mid 20th century styling. Wood handle is solid with no cracks. Ideal for display, woodworking, tool collections, or restoration projects.
Reamer bit for Brace three bladed 1 1/4 in wide
This is the only one I have seen with this drastic angle. There are marks but none I can ID.
Approx. 40+ Long Gun Drills, 1-1/4″ diam. down, Machinist Lathe Mill Tool, Used
Approx. 40+ Long Gun Drills, 1-1/4″ diam. down, Machinist Lathe Mill Tool, Used These drills are in used condition, they range from 1.25″ diameter on down. There may actually be one or two other drills in there which are larger than 1.25″ diameter. These came from an old machine shop and need to go to a good home. Sold as shown, check pics for details. Any questions contact me and I’ll do my best to help,Jesse
Lot Of 2 Sterling 1-1/4″ Mini Vices; Hobbyist Vice or for Small Mill / Drill
This lot includes two mini vices made by Sterling, a well-known brand in the tool industry. These vices are perfect for hobbyists or for use with small mills and drills. They have a 1-1/4″ jaw opening and are made in India. One box has been opened but not used the other box is still unopened.
VINTAGE! GEO. C. GRISWOOD & CO., T-HANDLE AUGER DRILL, 1 & 1/4 IN. DIAMETER
C. GRISWOOD & CO., T-HANDLE AUGER DRILL, 1 & 1/4 IN. A few small holes in the handle. Otherwise in very nice condition for it’s age.
Vintage 60s SEARS CRAFTSMAN “100” MODEL 5/16″ INDUSTRIAL DRILL 315.7810 W/Case
What you see is exactly what you’ll receive. Includes drill Polishing arbor Bits Case
Push drill, bits, (2) 5/16″ shank, notched .
You’re buying the (2) push drill bits, shown in the photo.They are in good condition, the Flathead has some marring on the blade. The Flathead is marked Yankee and the Phillips has no maker name, although is marked with size designation.There is a 3/8″ Flathead screwdriver bit, and a #1 Phillips head bit.These bits have notches and 5/16″ shanks, and will fit several Millers falls drills and probably many Yankees and others also.Make sure and check the dimension of your drill chuck before buying.
1/4 Inch Auger Drill Bit for Wood, 24″ Long Carbon Steel Quick Change Hex Sha…
UPC: Does not apply. EAN: Does not apply.
1-1/4” HSS Twist Drill – 12.75” OAL – 3MT Shank
1-1/4” HSS Twist Drill. Tooling & Accessories, Drilling.
Sears Craftsman #20921 Power Wood Boring 18 Drill Bit Set: 3/8″ – 1 1/4″ USA
2 Sears Craftsman power wood boring bit sets. 20921 and 2087. 3/8″ – 1 1/4″ wood boring bits and wood screw pilot bits. Used in good working condition.
Antique Large 1-1/4” T Handle Auger Bit 15” Long Wood Drill Primitive Farm Tool
These are great for drilling deep holes in barn beams. The handle is 2″ thick in the middle and 16″ long.
VINTAGE CRAFTSMAN HAND DRILL 1071 EGG BEATER STYLE 14 1/4″ LONG With 4 DRILLS
The Vintage Craftsman Hand Drill 1071 is a collectible tool with a classic egg beater style design, measuring 14 1/4″ in length. Made in the United States, this original piece from Craftsman is ideal for woodworking and carpentry projects. The set includes 4 additional drills, making it a versatile addition to any toolbox for both functionality and nostalgia.
Brad Point Wood Drill Bits for Woodworking, 6mm (1/4″) Dia Brad Point Drill, …
Application: Suitable for various drill drivers, such as bench drills, electric drills, and cordless drills. The drill bits can be applied in different types of softwood, hardwood, plywood, plastic, rubber, and polyurethanes, especially suitable for drilling precise holes in wooden furnitures.
Vintage MILLERS FALLS No. 2130 Right Angle Drill Drive 1/4” IN BOX W/ Paperwork
Vintage MILLERS FALLS tools No. 2130 Right Angle Drill Drive. Fits all 1/4” drills with 3/8” – 24T spindles. Original in BOX With Paperwork. Drives twist drills. Power wood bits. Sanding, polishing, buffing and other attachments. For 1/4” electric drills. For work in corners between studs, in any hard to reach places. Made in the USA.
VINTAGE SORBY WOOD HAND DRILL BITS 1 & 1,1/4in + 1,1/2in
A 1,1/2in bit (maker hard to see. HERE WE HAVE 4 DIFFERENT WOOD BRACE DRILL BITS. ).
VINTAGE Stanley Drill & Countersink 1 1/4″ x #10 (04-608) NEW OLD STOCK!
VINTAGE Stanley Drill & Countersink 1 1/4″ x #10 (04-608) NEW OLD STOCK! RARE!! Check out my other Stanley Screw-Link products. Will combine shipping! Box CC
WOOD COUNTER PILOT BIT 8-9, 1-1/4, VINTAGE
Vintage 1/4″ Electric Drill Model 315.7710 With Jig Saw Adpter Kit with a case
SEE ALL PICS. HARD TO FIND SAW ADAPTER IN THE KIT . The vintage 1/4″ Electric Drill Model 315.7710 by Craftsman is a collectible piece that comes with a jig saw adapter kit and a case. This original United States-made tool is perfect for woodworking enthusiasts or collectors of vintage tools. Its compact size and reliable brand make it a valuable addition to any workshop or collection.