Old Vintage Williams, J.H. Williams, J.H.W. Co. Wrench Set Of 5

Old Vintage Williams, J.H. Williams, J.H.W. Co. , all have the W diamond. Wrench Set Of 5. Good variety of old Williams. Includes the following. – 1934-1947 Williams double open-ended wrench, 90D, 9/16”-1/2” – 1934-1947 Williams double open-ended wrench, 725B, 9/16”-1/2” – 1934-1947 Williams double open-ended wrench, 723, 7/16”-3/8” – 1914-1924 J.M.W. & Co., double open-ended wrench, #25, 5/16”-1/4” – J.H. Williams, off-set face pin spanner, 422, zero on back

Orig. Rosewood Rear Handle for Sargent 22″ No. 422 Jointer Plane- mjdtoolparts

An EARLY AND ORIGINAL ROSEWOOD HANDLE for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This early handle, which came from a “Type 1” version of the No. 422 jointer plane, retains nearly all of its original finish. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.38 Inches (Ref. Id No.: 421142) [Free Shipping]

Teknion T422 Office Furniture Key

Teknion T422 file cabinet, desk and cubicle replacement key. Genuine Original Equipment Part. Also known as: Boulevard, Corry Jamestown, Global, Metal Arc, Pundra, Wesko.

Orig. Frog and adj. lever for Chaplin’s No. 422 Block Plane – 2″- mjdtoolparts

An ORIGINAL FROG AND ADJUSTMENT LEVER for a Chaplin’s Patent No. 422 adjustable throat extra wide block plane by Tower & Lyon, New York, New York. The frog mounts on a raised boss in the body and is secured by the small screw. The lever adjustment screws into a second raised boss behind the cutter and it engages the milled grooves on the base of the frog. Length = 3.25 Inches (Ref. Id No.: 347486) [Free Shipping]

Orig. Horseshoe Lateral Frog for Sargent No. 422 Plane – 2 3/8″ – mjdtoolparts

An ORIGINAL FROG MECHANISM for an early type Sargent No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width frog is the early type with the so-called horseshoe lateral that was used on very early Sargent planes. This frog could be put directly to use restoring a plane having a missing, damaged or degraded frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 474458) [Free Shipping]

Founder’s Grade Iron/Chip Brkr. for Sargent No. 422 Plane, Type 5- mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with the “Type 5” trademark showing the Sargent name and is in excellent working condition. It is also marked with the “422” designation for the number of the plane on which it was originally provided. This iron and chip breaker would be appropriate for any Sargent bench plane that uses a 2 3/8 inch width cutting iron. As good as they get. Length = 7.88 Inches (Ref. Id No.: 473832) [Free Shipping]

Orig. Chip Breaker & Screw for Sargent No. 410, 418 or 422 Plane – mjdtoolparts

An ORIGINAL CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut with original screw. This 2 3/8″ width chip breaker is in top condition and could be put directly to use. The original screw to secure the chip breaker to the plane iron is included as well. Length = 6.00 Inches (Ref. Id No.: 471722) [Free Shipping]

Orig. Later Type Mahogany Handles for Sargent No. 418, 422 Planes- mjdtoolparts

An ORIGINAL LATER TYPE MAHOGANY FRONT KNOB AND REAR HANDLE for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. These handles, which have Sargent’s later type “tall” front knob, will also work with the Sargent No. 410 and No. 418 planes. The original screws to secure the handles to the plane body are included as well. Length = 4.38 Inches (Ref. Id No.: 457377) [Free Shipping]

Founder’s Grade 2 3/8″ Iron/Chip Brkr. for Sargent No. 422 Plane – mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width cutter is marked with the early Sargent “Type 2” oval logo and is in top condition. Early Sargent irons were not marked with the specifict product number and this iron and chip breaker would be appropriate for any early Sargent bench plane that uses a 2 3/8 inch width cutting iron. As good as they get. Length = 8.00 Inches (Ref. Id No.: 388067) [Free Shipping]