Orig. Blade for Chaplin’s Impr. No. 1207 Jack Plane- 2 1/8″ Width – mjdtoolparts

An ORIGINAL 2 1/8″ WIDTH CUTTING IRON for a Chaplin’s Improved Patent jack Plane, No. 207, 277, 1207 of 1277 by Tower & Lyon, New York, New York. This cutter will also work with the No. 4 size version of the Chaplin’s Patent, sizes 205, 1205, 255 and 1255. It is in excellent condition and could be put directly to use. Length = 7.25 Inches (Ref. Id No.: 475866) [Free Shipping]

W. Butcher & Co. 2 1/8″ Width Tapered Single Cutting Iron – mjdtoolparts

An original 2 1/8″ width TAPERED CUTTING IRON for a wooden bench plane by W. Butcher, Sheffield, England. This clean and usable cutting iron, which has a circular hole in the center to receive the screw to secure the chip breaker, could be put directly to use. Length = 8.00 Inches (Ref. Id No.: 440662) [Free Shipping]

Unused 2 1/8 Inch Toothing Cutting Iron – R. Groves & Sons – mjdtoolparts

An ORIGINAL 2 1/8″ WIDTH “TOOTHING” CUTTING IRON for a wooden plane by R. Groves & Sons, Sheffield, England. This tapered cutting iron has a series of very narrow milled grooves running vertically on the lower edge of the iron. This forms a very fine grooving edge that is used to score the surface of wood in preparation for the application of wood veneer. It has been boldly struck with the maker imprint and it is in ready to use condition. Length = 7.38 Inches (Ref. Id No.: 420978) [Free Shipping]

Orig. Unused -2 1/8″ Cutting Iron for Record 010 Rabbet Plane – mjdtoolparts

An ORIGINAL NO. 010 RABBET PLANE CUTTING by the Record Tool Works, Sheffield, England. This unused old hardware stock item, which is marked with the designation “Tungsten Vanadium”, has a cutting edge that measures 2 1/8″ in width. The cutter will also fit the Stanley No. 10 or No. 10 1/2 carriage maker’s rabbet planes. Length = 7.00 Inches (Ref. Id No.: 474160) [Free Shipping]

W. Greaves 2 1/8″ Width Chip Breaker & Screw for Tapered Iron – mjdtoolparts

A CLEAN AND USABLE 2 3/8″ CHIP BREAKER FOR A WOODEN BENCH PLANE by W. Greaves & Sons, Sheaf Works, England. This very little used chip breaker is in ready to use condition. The original screw to secure the chip breaker to the plane iron is included as well. Length = 5.25 Inches (Ref. Id No.: 430013) [Free Shipping]

Orig. 2 1/8″ Cutting Iron for Stanley No. 27 Plane- “Type 11” T.M.- mjdtoolparts

An ORIGINAL 2 1/8″ WIDTH CUTTING IRON for a Stanley No. 27 jack plane by STANLEY. The No. 27 transitional jack plane and the No. 127 Liberty Bell transitional jack plane were the only Stanley planes that used the 2 1/8″ width iron. This example, which is marked with the ca. 1912 era “Type 11” tradeamark, is in clean, sound and ready to use condition and could be put directly to use. Length = 6.50 Inches (Ref. Id No.: 415112) [Free Shipping]

Orig. 2 1/8″ Cutting Iron for Stanley No. 10/10 1/2 Planes – S.W. – mjdtoolparts

An ORIGINAL CUTTING IRON FOR A STANLEY NO. 10, 10 1/2 OR 10 1/4 CARRIAGE MAKER’S RABBET PLANE by STANLEY. This cutting iron will also fit the Record 010 rabbet plane or a similarly configured rabbet plane by another maker. It measures 2 1/8 inches in width. This original old cutting iron is marked with the ca. 1920’s era Sweetheart trademark. There is some tarnish on the top of the iron near the trademark, but the face is in excellent working condition. Approximately 5/8″ of the original cutting iron remains. Length = 7.25 Inches (Ref. Id No.: 471692) [Free Shipping]

Moker Piston Ring Compressor Tool Kit 2-1/8 to 7 Inch

Complete Tool Kit: Includes 1x Piston Ring Pliers, 1x Piston Ring Compressor, and 1x Wrench—everything you need to get the job done efficiently and effectively. Simplify Piston Installation: Easily install and remove piston rings up to 6.4mm (1/4″) without twisting.

VINTAGE SEARS CRAFTSMAN NO. 00H BENCH TOP PIPE VISE 1/8″ – 1 1/2″ Used Surplus

EBAYROOMSHELF The product is a vintage Sears Craftsman bench top pipe vice, specifically the model number 00H. Made in the United States, this tool is designed to securely hold and shape pipes ranging in size from 1/8″ to 1 1/2″. With the trusted Craftsman brand and durable construction, this bench top pipe vice is a valuable addition to any collection of plumbing or steam fitting tools.

Orig. Solid Cast 2 1/8″ Cap for Steers Patent No. 405- Brattleboro -mjdtoolparts

An ORIGINAL SCREW LOCK CAP for a Steers Patent No. 404 smooth plane or No. 405 jack plane by the Brattleboro Tool Company, Brattleboro, Vermont. This cap, which is designed for use with a cutting iron measuring 2 1/8 inches in width, is in excellent condition and could be put directly to use. Length = 3.75 Inches (Ref. Id No.: 371054) [Free Shipping]

38334 2-1/8″ Self Feed Wood Drill Bit

High carbon steel for maximum strength and durability Inside cutting blade shaves clean smooth holes Easy to replace feed screw tip available (Century Part #38304 & #38305). Precision milled shank securely tightens into drill chuck eliminate wobble for precise drilling.