Orig. Early Type Cutting Iron for Sears No. 3730 Rabbet Plane – mjdtoolparts

An ORIGINAL CUTTING IRON for a Sears “Craftsman” brand filletster plane, No. 3730, by Sears, Roebuck & Company, Chicago, Illinois. This cutter, which is marked with the early oval form logo, is in excellent condition and could be put directly to use. Length = 3.75 Inches (Ref. Id No.: 450174) [Free Shipping]

Depth Stop for Millers Falls No. 85 Rabbet Plane- 99% Japan – mjdtoolparts

An ORIGINAL CAST IRON DEPTH STOP for a Millers Falls No. 85 rabbet plane by the Millers Falls Company, Millers Falls, Massachusetts. The Millers Falls depth stops for the No. 85 rabbet plane were configured differently than a depth stop for a Stanley plane and the two are not interchangeable. This original Millers Falls depth stop is in top condition and could be put directly to use. Length = 3.00 Inches (Ref. Id No.: 452356) [Free Shipping]

Orig. Depth Stop & Shouldered Screw for Stanley No. 78 Rabbet Plane-mjdtoolparts

An ORIGINAL DEPTH STOP AND SHOULDERED SCREW for a Stanley No. 78 duplex filletster and rabbet plane. This stop and screw will fit the No. 78 duplex rabbet filletster plane and Stanley Rabbet Planes Nos. 180, 181, 182, 190, 191 and 192. These plane components were frequently lost and have become difficult to find. These are in excellent condition and stand ready to restore your No. 78 to its full capabilities. Length = 2.00 Inches (Ref. Id No.: 449955) [Free Shipping]

Orig. Screws for Side Plate – Stanley No. 140 Rabbet Plane- mjdtoolparts

A PAIR OF ORIGINAL SIDE PLATE FIXING SCREWS for a Stanley No. 140 plane by STANLEY. These screws were used to secure the removable side plate on the No. 140 skew rabbet block plane. As was the case with all of Stanley’s screws, these use an uncommon pitch thread that was essentially unique to Stanley. Length = 0.75 Inches (Ref. Id No.: 473003) [Free Shipping]

Orig. Lever Cap for Sears “Craftsman” NO. 3730 Rabbet Plane – mjdtoolparts

An ORIGINAL LATER TYPE SCREW LOCK CAP for a Sears Craftsman brand rabbet and filletster plane, No. 3720, by Sears, Roebuck & Company, Chicago, Illinois. This ca. 1950’s cap retains approximately 90% of its original black japan finish. The original tension screw to secure the cutting iron to the plane is included as well. Length = 3.00 Inches (Ref. Id No.: 374703) [Free Shipping]

Original Body for Stanley No. 191 Rabbet Plane-1 1/4 Inch- Unused – mjdtoolparts

An ORIGINAL CAST IRON BODY for a Stanley No. 191 1 1/4 inch width rabbet plane by STANLEY. This plane body is in essentially unused condition and it retains fully 98% of its original black japan finish as well as the original nicker spurs on the side. A great Instant Upgrade item in top collector quality condition. Length = 10.00 Inches (Ref. Id No.: 342091) [Free Shipping]

Later Type Screw Lock Cap Iron for Craftsman No. 3720 Rabbet Plane -mjdtoolparts

An ORIGINAL LATER TYPE SCREW LOCK CAP for a Sears Craftsman brand rabbet and filletster plane, No. 3720, by Sears, Roebuck & Company, Chicago, Illinois. This ca. 1950’s cap retains approximately 90% of its original black japan finish. The original tension screw to secure the cutting iron to the plane is included as well. Length = 3.00 Inches (Ref. Id No.: 359097) [Free Shipping]

Orig. Cutting Iron for Stanley No. 99 Side Rabbet Plane- Unmarked – mjdtoolparts

An ORIGINAL CUTTING IRON for a Stanley No. 99 side rabbet plane by STANLEY. This frequently missing or degraded part is in excellent condition. It is ground and tapered for use on the left-handed No. 99 plane only. There are no marks on the blade, but it is the iron produced and used by Stanley. Length = 2.88 Inches (Ref. Id No.: 399596) [Free Shipping]

Founder’s Grade Body for Stanley No. 99 Side Rabbet Plane – 98% – mjdtoolparts

A FOUNDER’S GRADE NICKEL PLATED CAST IRON PLANE BODY for a Stanley No. 99 side rabbet plane by STANLEY. This Type 3 version of the No. 99 was originally fitted with a depth stop on the side away from the handle. It is in unused condition, retaining some 99% of its original nickel plating. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. As good as they get. Length = 4.00 Inches (Ref. Id No.: 382514) [Free Shipping]

Orig. Nicker Spur and Screw for Stanley No. 191 Rabbet Plane – mjdtoolparts

An ORIGINAL NICKER SPUR AND SET SCREW for Stanley rabbet planes No. 190, 191 and 192 by STANLEY. This screw has three sharpened cutting edges and one point without a cutter to allow it to be retracted when not in use. This example is in excellent condition and could be put directly to use. Length = 0.63 Inches (Ref. Id No.: 404177) [Free Shipping]

Founder’s Grade Blade for Sears Craftsman No. 3730 Rabbet Plane -mjdtoolparts

A FOUNDER’S GRADE ORIGINAL CUTTING IRON FOR A SEARS CRAFTSMAN RABBET AND FILLETSTER PLANE by Sears, Roebuck & Company, Chicago, Illinois. This 1 1/2 inch width cutter is in unused condition. It is marked with the Craftsman logo and the number designation. As good as they get. Length = 3.75 Inches (Ref. Id No.: 386589) [Free Shipping]

Orig. “Type 6” Arms for Stanley No. 46 Skew Rabbet Plane – Type 6 – mjdtoolparts

A PAIR OF LONG ARMS for a Stanley No. 46 skew rabbet and dado plane by Stanley. These arms are frequently missing or degraded. These, which came from a “Type 6” version of the No. 46, are in excellent condition. The original fixing screw to secure the slitting cutter and the slitter depth stop is not included with this pair. Length = 5.50 Inches (Ref. Id No.: 425684) [Free Shipping]

Orig. Cutting Iron for Stanley No. 278 Rabbet Plane – Unmkd. Type – mjdtoolparts

An ORIGINAL CUTTING IRON for a Stanley No. 278 rabbet & filletster plane by STANLEY. The cutter has milled grooves on the back side to engage the lever adjustment mechanism for the depth of cut. As was the case on early examples of the No. 278, this cutter is not marked with a trademark or maker imprint, but it will fit in and work with all models of the No. 278 that were produced. Length = 1.00 Inches (Ref. Id No.: 459190) [Free Shipping]