Orig. Beech Front Knob & Screw for Sargent No. 3420 Transitional – mjdtoolparts

An ORIGINAL TURNED BEECH FRONT KNOB for a Sargent No. 3420 transitional plane by Sargent & Company, New Haven, Connecticut. This knob is in clean, sound and ready to use condition. The original wood screw to secure the knob to the plane body is included as well. Length = 1.38 Inches (Ref. Id No.: 474618) [Free Shipping]

Orig. Plane Knob Fixing Screw – No. 5 Plane Low Knob Type – mjdtoolparts

An ORIGINAL KNOB BOLT AND BRASS NUT for a low knob version of the Stanley No. 5 jack plane by STANLEY. This bolt has the early type cylindrical brass nut to tighten the front knob to the plane body. It is in excellent condition and could be put directly to use. Length = 1.75 Inches (Ref. Id No.: 451376) [Free Shipping]

Orig. Mahogany Knob/Screw for Winchester No. 3010 Jack Plane -mjdtoolparts

An ORIGINAL TURNED MAHOGANY FRONT KNOB for a Wincheter No. 3010 bench plane by the Winchester Repeating Arms Company, New Haven, Connecticut. This knob, which fits the Winchester equivalent of the Stanley No. 5 jack plane, was produced for Winchester by cross-town neighbor Sargent & Company of New Haven, Connecticut. The original threaded rod and brass nut to secure the knob to the plane body are included as well. Length = 2.75 Inches (Ref. Id No.: 423740) [Free Shipping]

Early Rosewood Front Knob/Screw for Sargent 8 Inch No. 408 Plane – mjdtoolparts

An ORIGINAL ROSEWOOD FRONT KNOB for an early type Sargent No. 408 smooth plane by Sargent & Company, New Haven, Connecticut. This knob is absent any chips, cracks or other apologies and could be put directly to use. The original threaded rod and brass nut to secure the knob to the plane body is included as well. Length = 1.88 Inches (Ref. Id No.: 441503) [Free Shipping]

Orig. Front Knob/Screw for Sears Craftsman No. 5264 Smooth Plane – mjdtoolparts

An ORIGINAL FRONT KNOB AND FIXING SCREW for a Sears “Craftsman” brand No. 5246 smoothing plane by Sears, Roebuck & Company, Chicago, Illinois. This knob has a few scuffs and scratches, but it is otherwise in excellent condition and could be put directly to use. Length = 2.75 Inches (Ref. Id No.: 441962) [Free Shipping]

Orig. Rosewood Knob/Screw for Stanley No. 8 Plane – Type 14 – mjdtoolparts

An ORIGINAL LATER TYPE “TALL” FRONT KNOB for a Stanley No. 4 1/2 heavy smoothing plane, No. 8 or No. 8 C 24″ length jointer plane by STANLEY. This clean, sound and ready to use knob, which came from a “Type 14” version of the No. 8 plane, could be put directly to use. The planes of the “Type 14” version were the first to have the raised ring cast in the front of the bed to secure the handle and this knob has the distinctive tapered base designed to accommodate that raised ring. The original threaded rod and brass nut to secure the knob to the plane body are included as well. Length = 2.75 Inches (Ref. Id No.: 434927) [Free Shipping]

Stanley 4 & 5 Plane Screws Brass Nuts for Handle Knob 20 TPI Thread No. 4 & 5

Stanley Plane Parts NEW! 1 Set of Handle and Knob Screws, Brass Nuts and washers as described below. (20 Threads Per Inch ) Fits Stanley No. 4 and No. 5 planes Note: Please READ ALL of Description & Specs below to ensure this Screw/Nut Set will fit your need. Handle Screw specifications:3-3/4″ Length3/16″ Diameter20 TPI (Threads Per Inch) COARSE ThreadKnob Screw Specifications:2-1/4″ Length3/16″ Diameter20 TPI (Threads Per Inch) COARSE ThreadBrass Nut Specifications:1/2″ Length7/16″ Outside DiameterInternal Threads are 3/16″ x 20 TPI (which fits screws listed above) Slotted HeadPLEASE READ FOLLOWING BEFORE PURCHASING! This Screw Set will fit Stanley No. 4, Millers Falls, Craftsman and other Planes that use Screws and Nuts as described above. PLEASE examine the photos and check the specifications in this listing to see if this set will work on your plane. This set contains the “older” style thread style screws/nuts. These screws are considered COARSE Thread. I have attached a photo to show the difference in the COARSE Thread and the “Newer” FINE THREAD that comes on newer style Stanley Planes. Buyer is responsible for ensuring the thread style in this listing is what is needed. I do accept returns but Buyer responsible for ALL shipping costs (including return shipping cost AND any shipping if an EXCHANGE of the different thread is needed. ANY REFUND processed will be MINUS the ORIGINAL SHIPPING COST. I have tried to thoroughly explain and describe the screws and nuts in this listing so I cannot pay any additional shipping in the case the buyer failed to read and understand what this listing contains. IF IN DOUBT WHETHER THIS SCREW SET WILL FIT YOUR PLANE…. CONTACT ME AND SEND ME A PHOTO OF YOUR OLD SCREWS YOU ARE REPLACING AND i WILL ASSIST IN CONFIRMING IF THESE SCREWS WILL BE A MATCH TO YOUR SCREWS. Sorry to be so direct regarding shipping, but I have had to many exchanges due to buyer not fully understanding what is contained in the listing. Shipping cost an average of 4.25 per shipment (within the USA) and I simply cannot pay for extra shipments back and forth. *Inv# 904-700 90055

Stanley Knob Screw

Stanley plane knob screw and threaded rod. This is for 1 rod and 1 screw. If you want multiple select the quantity.

Orig. Plane Knob Fixing Screw – For No. 7 & 607 Tall Plane Knobs – mjdtoolparts

An ORIGINAL KNOB BOLT AND BRASS NUT for a low knob version of the Stanley No. 6 fore plane or No. 7 jointer plane by STANLEY. This bolt has the early type cylindrical slotted brass barrel nut. This knob bolt is for the earlier, “low” front knob, which measures about 1/2″ shorter in height than the later “tall” knobs, which were added after 1922. It is in excellent condition and could be put directly to use. Length = 2.50 Inches (Ref. Id No.: 451443) [Free Shipping]

Orig. Rosewood Front Knob and Screw for Standard Rule No. 34 – mjdtoolparts

An ORIGINAL TURNED ROSEWOOD FRONT KNOB for a Standard Rule Company No. 32, 33 or 34 transitional jointer plane by the Standard Rule Company, Unionville, Connecticut. The original wood screw to secure the knob to the plane body is included with the knob. Length = 1.50 Inches (Ref. Id No.: 364400) [Free Shipping]