This is a lever cap for a Stanley No. 40. Fremont NH 03044. 54 Danville Rd.
Archives
3441 Stanley No. 40; Lever Cap
This is the lever cap for a Stanley No. 40. Fremont NH 03044. 54 Danville Rd.
Unused Beech Hdl./Knob Stanley No. 40 Scrub Plane-Founder’s Grade- mjdtoolparts
An ESSENTIALLY UNUSED PAIR OF BEECH HANDLES FOR A STANLEY NO. 40 SCRUB PLANE by STANLEY. Fully 98% of the original lacquer finish remains on these handles, which are in our highest Founder’s Grade condition. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. If you have a Stanley No. 40 having damaged or degraded handles, these old hardware stock handles will restore your plane to its original magnificence. Length = 4.50 Inches (Ref. Id No.: 453528) [Free Shipping]
4437 Stanley No. 40; Iron, SW Trademark
This is an iron with a SW trademark for a Stanley No. 40. Fremont NH 03044. 54 Danville Rd.
Founder’s Grade 1 1/4″ Iron for Stanley No. 40 Plane- Unused Cond.- mjdtoolparts
A FOUNDER’S GRADE 1 1/4″ WIDTH CUTTING IRON for a Stanley No. 40 “scrub” plane by STANLEY. This iron, which is in unused, original condition, is marked with the “Notched Rectangle” trademark introduced in the 1930’s. As good as they get. Length = 5.63 Inches (Ref. Id No.: 413523) [Free Shipping]
Orig. Box for Stanley No. 40 Scrub Plane – Full Orig. Label – mjdtoolparts
An ORIGINAL PASTEBOARD BOX for a Stanley No. 40 “Scrub” plane by STANLEY. The full, original paper label remains on this box. A most unusual original box in top collector quality condition. Length = 10.13 Inches (Ref. Id No.: 417309) [Free Shipping]
Vintage Eclipse No 40 PG Adjustable Hacksaw
Vintage Eclipse No 40 PG Adjustable Hacksaw. Condition is Used. Dispatched with Royal Mail Tracked 48 with Age Verification.
Vintage Lot LITTCO No. 40 4″ & 2 2″ Basic C Clamps Super Strength Alloy USA Nice
Clamps are used. The Littco has paint on it. Overall they are 8n good co diction with no cracks. Please see all enlarged photos for details. Item ships to contiguous United States. Carrier depends on buyer location. Please review description and photos in full and be sure you understand the item and description is to your satisfaction before bidding /buying. I do not accept returns. Thank you for viewing my item and have a great day! 042622.ws4
3183 Stanley No. 40; Iron, “P” Trademark
This is an iron for a Stanley No. 40. Wood parts may have toolbox dings, but are free of checks or repairs, unless otherwise noted. 54 Danville Rd.
Orig. Rosewood Rear Handle for Stanley No. 40 Scrub Plane-w/ Screw- mjdtoolparts
An ORIGINAL BRAZILIAN ROSEWOOD REAR HANDLE for a Stanley No. 40 scrub plane by STANLEY. This frequently damaged or degraded component is in clean, sound and ready to use condition. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.50 Inches (Ref. Id No.: 472861) [Free Shipping]
Orig. Screw Lock Cap for Marples & Sons No. M40 Grooving Plow – mjdtoolparts
An ORIGINAL SCREW LOCK CAP for a William Marples No. M40 grooving plow plane by Wm. Marples & Sons, Hibernia Works, Sheffield, England. Fully 95% of the original red japan finish remains on this frequently missing, damaged or degraded plane component. The original tension screw is included with the cap. Length = 1.75 Inches (Ref. Id No.: 456684) [Free Shipping]
VTG Stanley No.40 Chisel 1/2”Cabinetmaker Tool NOS Rare Composition Handle NEW
VTG Stanley No.40 Chisel 1/2” Cabinetmaker Tool NOS Rare Composition Handle NEW The box is in ok condition NOS RareWith Metal striking cap! SEE DETAILED PICTURES Made in the USA The original factory grind needs to be honed to your liking, and away you will cut. ANY QUESTIONS JUST ASK GOOD LUCK AND HAPPY BIDDING
Vintage Stanley No. 40 Bevel Edge Paring Chisel 3/4 ” Everlasting Chisel Tool
5 1/4 ” long. 8 3/4″ total length.
Early Antique Stanley No. 40-1/2 Scrub Plane 1888-1902 Logo “B” Casting
Very early, possibly first year made, Stanley no. 40 1/2 scrub plane. It does show the repair line. The cutter is quite short from use but is likely original to the plane. Thus, I believe this plane was likely made in 1902, or the first year of production.
Original Plane Body for Stanley No. 40 Scrub Plane- Sound & Usable- mjdtoolparts
An ORIGINAL CAST IRON BODY FOR A STANLEY NO. 40 SCRUB PLANE by STANLEY. This plane takes a 1 1/4 inch width cutting iron. It is complete without any chips and cracks, noting a small “hang” hole in front of the front knob that will not adversely affect funtionality. Fully 95% of the original black japan finish remains. Length = 9.75 Inches (Ref. Id No.: 467103) [Free Shipping]
Stanley No. 40 Bevel Edge Bench Chisel Set Of 8
Selling this set of 8 Stanley Everlast chisels number 40. The sizes in inches are 1.5, 1.25, 1, .75, .50, .50, .375, .25. They seem to be very sharp. The chisel that is 1.25 inches has a gap/space between the black Handel and the metal top. Any questions please ask
4435 Stanley No. 40; Tote, Beech
This is a tote for a Stanley No. 40. It is made of beech. Fremont NH 03044. 54 Danville Rd.
Orig. Rosewood Front Knob for Stanley No. 40 Scrub Plane-w/ Screw- mjdtoolparts
An ORIGINAL BRAZILIAN ROSEWOOD FRONT KNOB for a Stanley No. 40 scrub plane by STANLEY. The original threaded rod and brass nut to secure the knob to the plane body is included as well. Length = 4.50 Inches (Ref. Id No.: 423599) [Free Shipping]
4337 Stanley No. 40; Lever Cap
This is a lever cap for a Stanley No. 40. Fremont NH 03044. 54 Danville Rd.
Orig. Plane Body for Stanley No. 40 “Scrub” Plane – 1 1/4″ Width – mjdtoolparts
An ORIGINAL CAST IRON BODY FOR A STANLEY NO. 40 SCRUB PLANE by STANLEY. This plane takes a 1 1/4 inch width cutting iron. It is complete without any chips and cracks and could be put directly to use. Fully 85% of the original black japan finish remains. Length = 9.75 Inches (Ref. Id No.: 474538) [Free Shipping]
Orig. Plane Body for Recod No. 40 Plane- Complete & Excellent – mjdtoolparts
An ORIGINAL PLANE BODY for a Record No. 040 grooving plow plane by the Record Tool Works, Sheffield, England. Fully 95% of the original nickel plating remains on this extra clean and uncommon plane body. Length = 5.50 Inches (Ref. Id No.: 474165) [Free Shipping]
Brown & Sharpe No 40 Micrometer Machinist Tool In Original Box
Estate purchase Original box Overall good condition
Set James Swan No. 40 Brace Bits Wood Tool Drill Twist Auger w/Box Carpenter’s
These appear to be only lightly used with mild wear. The 1″ is a bit dark. Expect minor evidence of use or imperfections, dings etc. from age. We have been giving quality service to the on-line collector community for over 19 years.
Stanley No. 40 Multi-Plane Pattern Makers V logo (1912-1918)
Stanley No. 40 Multi-Plane Pattern Makers V logo (1912-1918) early set with irons in a very nice wooden box, seldom seen for sale, good usable condition, no unwanted markings tattoos. Will be carefully packaged for shipping.
Antique Warranted Superior Tree Hand Saw The Blade is 40” No Missing Teeth
The is a vintage Warranted Superior logging saw, a collectible carpentry tool often used for rustic decor. Features: Typically features a large metal blade and a distinctive wooden handle. Condition: Antique saws often show signs of age, including patina, surface rust, scuffs, and scratches. This particular one is in very good condition! Usage: Historically used for logging or woodworking, they are now popular as decorative items in rustic settings. Variations: Available in both one-man and two-man versions, with varying tooth patterns.