Orig. 2 3/8″ Iron for Sargent No. 422 Plane – “Type 4” T.M.- mjdtoolparts

An ORIGINAL CUTTING IRON for a Sargent No. 422 jointer plane, No. 410 heavy smoothing plane or No. 418 fore plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width cutter is marked with Sargent’s “V.B.M.” trademark, standing for “Very Best Made” as well as the No. 422 number designation. It is in excellent condition and could be put directly to use. Length = 7.75 Inches (Ref. Id No.: 437770) [Free Shipping]

Orig. Plane Body for Sargent No. 2204 All Steel Block Plane – mjdtoolparts

An ORIGINAL PLANE BODY for a Sargent No. 5206 all-steel low angle block plane by Sargent & Company, New Haven, Connecticut. The original screw to secure the cap and the adjusting knob are included with this plane body, which retains nearly all of its original finish. Length = 4.25 Inches (Ref. Id No.: 344580) [Free Shipping]

Orig. Beech Front Knob & Screw for Sargent No. 3420 Transitional – mjdtoolparts

An ORIGINAL TURNED BEECH FRONT KNOB for a Sargent No. 3420 transitional plane by Sargent & Company, New Haven, Connecticut. This knob is in clean, sound and ready to use condition. The original wood screw to secure the knob to the plane body is included as well. Length = 1.38 Inches (Ref. Id No.: 474618) [Free Shipping]

Early Rosewood Front Knob/Screw for Sargent 8 Inch No. 408 Plane – mjdtoolparts

An ORIGINAL ROSEWOOD FRONT KNOB for an early type Sargent No. 408 smooth plane by Sargent & Company, New Haven, Connecticut. This knob is absent any chips, cracks or other apologies and could be put directly to use. The original threaded rod and brass nut to secure the knob to the plane body is included as well. Length = 1.88 Inches (Ref. Id No.: 441503) [Free Shipping]

Orig. Plane Body for Sargent No. 418 C Fore Plane – 95% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Sargent No. 418 C fore plane by Sargent & Company, New Haven, Connecticut. Fully 95% of the original black japan finish remains on this plane, which has only a few pinpont sized chips in the forward part of the throat to note as an apology. Length = 14.00 Inches (Ref. Id No.: 352492) [Free Shipping]

Orig. Sargent 2 1/8″ Width Tapered Cutting Iron – Excellent – mjdtoolparts

An ORIGINAL 2 1/8″ TAPERED CUTTING IRON for a wooden bench plane by Sargent & Company, New Haven, Connecticut. This extra clean iron is in top condition and could be put directly to use. This old exceptionally well preserved cutting iron is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. Length = 8.00 Inches (Ref. Id No.: 450424) [Free Shipping]

Orig. Sargent & Co., New Haven “Standard Steel Squares” Pamphlet – mjdtoolparts

An ORIGINAL “POCKET” CATALOGUE OF SARGENT STANDARD STEEL SQUARES by Sargent & Company, New Haven, Connecticut. This undated book of 30 pages measures 7 3/4″ tall x 4″ wide. It illustrates and describes the full line of specialized carpenter’s squares offered by Sargent at the time of publication and provides instructions on the use of the specialzed tables for cutting rafters for building construction. It is in top colleector quality condition. Length = 7.75 Inches (Ref. Id No.: 123920) [Free Shipping]

East India Mahogany Handle Sargent 22″ Shaw Patent No. 22 Plane – mjdtoolparts

An ORIGINAL EAST INDIA MAHOGANY REAR HANDLE for a Sargent No. 22 Shaw Patent jointer plane by Sargent & Company, New Haven, Connecticut. This handle is in excellent condition and could be put directly to use. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.75 Inches (Ref. Id No.: 364491) [Free Shipping]

Orig. Frog Mechanism for Sargent No. 407 Plane – No. 2 Size- mjdtoolparts

An ORIGINAL FROG MECHANISM FOR A SARGENT NO. 407 SEVEN-INCH SMOOTHING PLANE by Sargent & Company, New Haven, Connecticut. This freqently damaged part is in superb condition, retaining 95% of its original black japan finish. This No. 2 size frog measures 1 5/8 inches in width and is in top condition. Length = 6.75 Inches (Ref. Id No.: 346888) [Free Shipping]

Orig. 1 5/8″ Cutter for Sargent No. 607 Low Angle Block Plane – mjdtoolparts

An ORIGINAL CUTTING IRON for a 1 5/8 inch width Sargent No. 607 adjustable block plane by Sargent & Company, New Haven, Connecticut. This extra clean cutter is marked with the Sargent name and the product number of the plane. It has a series of milled grooves on the underside to engage the depth of cut adjustment mechanism. Length = 4.25 Inches (Ref. Id No.: 399261) [Free Shipping]

Orig. Body/Knob/Adj. for Sargent No. 607 Low Angle Block Plane – mjdtoolparts

An ORIGINAL BODY, FRONT KNOB AND ADJUSTMENT MECHANISM for a Sargent No. 207 block plane by Sargent & Company, New Haven, Connecticut. This extra clean body is absent any chips, cracks or other apologies and it could be put directly to use restoring a Sargent No. 207 plane having a damaged or degraded body. Length = 7.13 Inches (Ref. Id No.: 399266) [Free Shipping]

Orig. Adjuster Nut/Screw for Sargent No. 607 Low Angle Block Plane- mjdtoolparts

An ORIGINAL DEPTH OF CUT ADJUSTING SCREW AND CAST IRON CUTTER HOLDING FITTING for a Sargent No. 607 low angle block plane by Sargent & Company, New Haven, Connecticut. This frequently missing, damaged or degraded plane component retains its original spiral form cast iron knob. It is in excellent working condition and could be put directly to use restoring a Sargent No. 606 or 607 low angle block plane. Length = 3.00 Inches (Ref. Id No.: 399263) [Free Shipping]

Orig. Plane Body for Sargent No. 196 Rabbet Plane – 95% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Sargent No. 196 one-inch width rabbet plane by Sargent & Company, New Haven, Connecticut. Fully 95% of the original black japan finish remains on this extra clean plane, which has elaborate decoration cast in the side. Length = 10.00 Inches (Ref. Id No.: 456436) [Free Shipping]

Orig. Spur Wheel Nicker & Screw for Sargent No. 79 Rabbet Plane – mjdtoolparts

An ORIGINAL SERRATED CIRCULAR SPUR AND FIXING SCREW for a Sargent No. 79 duplex rabbet plane by Sargent & Company, New Haven, Connecticut. This later type spur is excellent condition and it includes the original screw to secure it to the plane body. When not needed, the spur can be set in such a way that the flat side of the spur is at the bottom. This spur is in top condition and could be put directly to use. Length = 0.75 Inches (Ref. Id No.: 413622) [Free Shipping]

Orig. Plane Body for Sargent No. 198 Rabbet Plane – 95% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Sargent No. 198 1 1/2 inch width rabbet plane by Sargent & Company, New Haven, Connecticut. Fully 95% of the original black japan finish remains on this extra clean plane, which has elaborate decoration cast in the side. Length = 6.75 Inches (Ref. Id No.: 427221) [Free Shipping]

Founder’s Grade Early Type Body for Sargent No. 79 Rabbet Plane – mjdtoolparts

A FOUNDER’S GRADE CAST IRON PLANE BODY for an early type Sargent No. 79 combination rabbet and filletster plane by Sargent & Company, New Haven, Connecticut. Fully 98% of the original black japan finish remains on this unused plane body, which has the ornamental casting used on early versions of the Sargent rabbet and filletster planes. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. As good as they get. Length = 2.88 Inches (Ref. Id No.: 461508) [Free Shipping]

Screw Lock Cap for Sargent No. 34 1/2″ Dado Plane – 95% Japan – mjdtoolparts

An ORIGINAL SCREW LOCK CAP for a Sargent No. 34 1/2″ width cast iron dado plane by Sargent & Company, New Haven, Connecticut. Fully 95% of the original black japan finish remains on this frequently missing, damaged or degraded plane component. The original tensioning screw and the screw to secure the cap to the plane body are included as well. Length = 3.25 Inches (Ref. Id No.: 401729) [Free Shipping]

Founder’s Grade East India Mahogany Front Knob for Sargent No. 22 – mjdtoolparts

A FOUNDER’S GRADE EAST INDIA MAHOGANY FRONT KNOB for a for Sargent Shaw Patent No. 22 jointer plane by Sargent & Company, New Haven, Connecticut. This knob is also appropriate for the Sargent No. 10 Shaw Patent heavy smoothing plane and the Sargent No. 18 Shaw Patent fore plane. The original threaded rod and brass nut to secure the knob to the plane body is included as well. Length = 2.00 Inches (Ref. Id No.: 359492) [Free Shipping]

Founder’s Grade 2 3/8″ Width Frog for Sargent No. 410, 418 & 422 – mjdtoolparts

A FOUNDER’S GRADE FROG MECHANISM for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width frog is in essentially unused condition and could be put directly to use restoring a plane having a missing, damaged or degraded frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. As good as they get. Length = 7.00 Inches (Ref. Id No.: 446423) [Free Shipping]

Orig. Frog & Screws for Sargent No. 410 or 410 C Plane – 2 3/8″ – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This frog, which is designed for use with a 2 3/8 inch width cutting iron is in very little used condition and could be put directly to use. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 463108) [Free Shipping]

Orig. 2 3/8″ Width Lever Cap for Sargent Planes No. 410, 418, 422 – mjdtoolparts

An ORIGINAL LEVER CAP for a Sargent No. 410, 418 or 422 2 3/8″ width bench plane by Sargent & Company, New Haven, Connecticut. This cap is cast with the Sargent name in raised letters inside a recessed rectangle on the face, beneath which is a casting containing the letters V.B.M. – for Very Best Made, a Sargent motto. Length = 7.00 Inches (Ref. Id No.: 467332) [Free Shipping]