East India Mahogany Rear Hdl. for Sargent 22″ No. 422 Jtr. Plane- mjdtoolparts

An ORIGINAL MAHOGANY REAR HANDLE for Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This handle is also appropriate for the Sargent No. 418 fore plane. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.38 Inches (Ref. Id No.: 471727) [Free Shipping]

Early Rosewood Front Knob for Sargent No. 422 Plane- w/ Screw- mjdtoolparts

An ORIGINAL ROSEWOOD FRONT KNOB for an early type Sargent No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This knob is absent any chips, cracks or other apologies and could be put directly to use. The original threaded rod and brass nut to secure the knob to the plane body is included as well. Length = 2.00 Inches (Ref. Id No.: 388070) [Free Shipping]

Early Rosewood Rear Handle for Sargent 22″ No. 422 Jointer Plane- mjdtoolparts

An EARLY AND ORIGINAL ROSEWOOD HANDLE for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This extra clean handle has one small sliver missing at the top, but it is otherwise in excellent condition, retaining nearly all of its original finish. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.38 Inches (Ref. Id No.: 388068) [Free Shipping]

Orig. Cutting Iron for Sargent No. 422 Jointer Plane – “Type 2” – mjdtoolparts

An ORIGINAL CUTTING IRON for a Sargent No. 422 jointer plane, No. 410 heavy smoothing plane or No. 418 fore plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with Sargent’s “Type 2” oval form trademark at the top. It is in clean and sound condition and it is clearly marked with the early Sargent logo. Length = 7.25 Inches (Ref. Id No.: 457303) [Free Shipping]

Orig. “Type 2” Cast Iron Body for Sargent No. 422 Jointer – 95%- mjdtoolparts

An ORIGINAL “TYPE 2” CAST IRON PLANE BODY for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. Fully 95% of the original black japan finish remains on this early plane body, which uses a 2 3/8 inch width cutting iron. The “Type 2” planes used the early type “horseshoe lateral” frog and are disinguished from the “Type 3” planes by having cylindrical receivers for the frog screws, rather than circuclar openings buttressed with a square casting to serve as reinforcement. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 22.00 Inches (Ref. Id No.: 388069) [Free Shipping]

Orig. 2 3/8″ Iron for Sargent No. 422 C Plane – “Type 4” T.M.- mjdtoolparts

An ORIGINAL CUTTING IRON for a Sargent No. 422 jointer plane, No. 410 heavy smoothing plane or No. 418 fore plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with Sargent’s “V.B.M.” trademark, standing for “Very Best Made”. This “Type 4” version of Sargent’s cutting irons is distinguished by having the nnumber of the plane for which it is intended imprinted on the top of the iron as part of the logo, in this case. It is in excellent condition and could be put directly to use. Length = 7.75 Inches (Ref. Id No.: 447518) [Free Shipping]

Orig. 2 3/8″ Width Chip Breaker for Sargent No. 410, 418 & 422 – mjdtoolparts

An ORIGINAL CHIP BREAKER for a Sargent No. 410, 418 or 422 bench plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width chip breaker has the distinctive oval cutout that differentiates Sargent from Stanley chip breakers. The market leader, the Stanley Rule & Level Company, used specialized threads that were designed not to work with competitors planes and vice versa. This Sargent chip breaker is in excellent condition and could be put directly to use on an appropriate Sargent plane. Length = 6.00 Inches (Ref. Id No.: 468855) [Free Shipping]

Orig. Cutting Iron for Sargent No. 422 Jointer Plane – “Type 6” – mjdtoolparts

An ORIGINAL CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width later type cutter is marked with the Sargent logo and is in top working condition. This plane is marked with the “Type 6″ version of the Sargent logo, which includes the number of the plane for which it was designed, the No. 422, but it will also work with other planes by Stanley, Millers Falls and others that use a 2 3/8” width cutting iron. Length = 7.38 Inches (Ref. Id No.: 446420) [Free Shipping]

Orig. Lever Cap for Sargent No. 410, 418 & 422 Planes – Early – mjdtoolparts

An EXTRA EARLY SMOOTH FACE LEVER CAP for a Sargent No. 410 heavy jack plane, No. 418 for plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This cap has a “keyhole” opening in the face and it has smooth casting. These caps were used only on “Type 1” and “Type 2” Sargent planes. The underside is cast with the designation marked “418/422”. It is designed for use with a 2 3/8″ width cutting iron. This one needs a bit of a cleanup, but it is without any chips, cracks or other apologies and could be put directly to use. Length = 7.00 Inches (Ref. Id No.: 434838) [Free Shipping]

Founder’s Grade Later Type Frog for Sargent No. 410, 418 & 422 – mjdtoolparts

A FOUNDER’S GRADE LATER TYPE FROG MECHANISM for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width frog is in essentially unused condition and could be put directly to use restoring a plane having a missing, damaged or degraded frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. As good as they get. Length = 7.00 Inches (Ref. Id No.: 473830) [Free Shipping]

Orig. Forward Fixing Screw for Sargent Planes No. 414, 418 & 422 – mjdtoolparts

An FORWARD FIXING SCREW FOR THE REAR HANDLE on a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This screw will work on Sargent planes No. 414, 415, 418, 422 and 424 to secure the front portion of the rear handle to the body of the plane. It is in excellent condition and could be put directly to use. Length = 4.38 Inches (Ref. Id No.: 463113) [Free Shipping]

Founder’s Grade Nickel Cap for Sargent No. 216/217 Block Planes – mjdtoolparts

A FOUNDER’S GRADE NICKEL PLATED CAM LOCK CAP for a Sargent No. 217 block plane by Sargent & Company, New Haven, Connecticut. Fully 98% original nickel plating remains on this extra clean cap, which was designed for use with a cutting iron measuring 1 5/8″ in width. As good as they get. Length = 4.25 Inches (Ref. Id No.: 402162) [Free Shipping]

Founder’s Grade Body/Nose for Sargent No. 81 Side Rabbet Plane – mjdtoolparts

A FOUNDER’S GRADE CAST IRON NICKEL PLATED PLANE BODY for a Sargent No. 81 showcase rabbet plane by Sargent & Company, New Haven, Connecticut. This very little used plane body retains Fully 98% of its original nickel plating. The removable nose section is included with the plane body. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. As good as they get. Length = 3.00 Inches (Ref. Id No.: 449863) [Free Shipping]

Orig. 1 1/2″ Sash Iron for Sargent No. 1080/1085 Planes – mjdtoolparts

An EXTRA CLEAN 1 1/2″ SASH CUTTING IRON, No. 21, by Sargent & Company, New Haven, Connecticut. This cutting iron, which was the reverse of the profile on the No. 22 sash cutting iron, was provided with the Sargent No. 1080 and No. 1085 combination plane. This example is in unused condition and could be put directly to work. Length = 3.50 Inches (Ref. Id No.: 351573) [Free Shipping]