Orig. Lever Cap for Stanley H1204 Handyman Smooth Plane – 2″ – mjdtoolparts

An ORIGINAL CAST IRON NICKEL PLATED LEVER CAP for a Stanley No. H1204 smooth plane by STANLEY. Fully 98% of the original nickel plating remains on this cap, which is cast with the Stanley Handyman designation in a angled rectangular recess on the face that is filled with red japanning. Length = 5.50 Inches (Ref. Id No.: 363285) [Free Shipping]

Orig. Plane Body for Stanley Handyman H1204 Plane- Gray Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Stanley Handyman No. H1204 plane smooth plane by STANLEY. Fully 95% of the original gray japan finish remains on this very little used Instant Upgrade item. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 359359) [Free Shipping]

Founder’s Grade Iron & Chip Breaker for Stanley “Handyman” H1204- mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Stanley “Handyman” smoothing plane, No. H1204 by STANLEY. “Made in England”. This essentially unused condition cutting iron is marked with the Stanley name, the “Handyman” logo and the designation “Made in England”. As good as they get. Length = 7.63 Inches (Ref. Id No.: 388720) [Free Shipping]

Orig. Screw Lock Cap for Stanley Gage G6 or G6 C-2 1/4 Inch Width- mjdtoolparts

An ORIGINAL SCREW LOCK CAP for Stanley Gage No. G 6 plane by STANLEY. Fully 95% of the original black japan finish remains on this frequently missing, damaged or degraded plane component. The cap is designed to secure the 2 1/4 inch width cutting iron used on the Gage fore type iron bench planes. Length = 3.50 Inches (Ref. Id No.: 366134) [Free Shipping]

Plow Dado Tool for No. 45 & 55 Planes- 3/4 Inch Width – No. 18 – mjdtoolparts

An ORIGINAL 3/4″ WIDTH PLOW DADO TOOL CUTTING IRON, No. 18, by STANLEY. This blade was supplied with the No. 45 and No. 55 combination planes. This cutting iron is designed to fit the Stanley No. 45 and No. 55 combination planes, and it will also work in the Record No. 405 combination plane produced by the Record Tool Works of Sheffield, England and the Large Combination Plane produced by Lee Valley Tools of Ottawa, Ontario, Canada. This example is in clean, sound and ready to use condition. Length = 3.50 Inches (Ref. Id No.: 461126) [Free Shipping]

Original Cap Iron & Screw for Gage G36 Plane – 2 1/4 Inch Width- mjdtoolparts

A FOUNDER’S GRADE SCREW LOCK CAP AND TENSIONING SCREW for a Stanley Gage No. 36 handled transitional smoothing plane by STANLEY. Fully 98% of the original black japan finish remains on this extra clean and ready to use cap, which is designed for use with the 2 1/4 inch width cutting iron used on the G 36. This cap will also work with the Stanley No. G 30 “Gage” transitional fore plane, which also uses a 2 1/4″ width cutting iron. As good as they get. Length = 3.13 Inches (Ref. Id No.: 405973) [Free Shipping]

Orig. Later Type 3/16″ Plough Iron for Stanley No. 50 Combo. Plane- mjdtoolparts

An ORIGINAL 3/16″ WIDTH PLOUGH CUTTING IRON for a Stanley No. 50 combination plane by STANLEY. This cutter was one of two plough cutters added to the No. 50 in 1936. This is the later style and has been machined with the milled grooves in the back to engage the depth of cut adjustment lever introduced in 1936. It was designated as cutter No. B in later Stanley catalogues. Length = 3.25 Inches (Ref. Id No.: 377040) [Free Shipping]

Orig. Rosewood Knob for Type 3 Stanley No. 45 Plane – Base Chips – mjdtoolparts

An original TURNED ROSEWOOD FRONT KNOB for an early Stanley No. 45 combination plane by STANLEY. These knobs were mounted on the nose of the body on early versions of the No. 45, Type 1 through Type 6. This one came from a “Type 3” version of the No. 45. It is in excellent condition, noting some chips from the base that will not adversely affect functionality. The original threaded rod and brass nut to secure the knob to the plane body are included as well. Length = 1.38 Inches (Ref. Id No.: 447844) [Free Shipping]

Orig. “Type 9” Rosewood Front Knob for Stanley No. 3 Plane – mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD FRONT KNOB for a Stanley No. 3, 3 C, 5 1/4 or 5 1/4 C plane as well as the No. 605 1/4 Bedrock plane by STANLEY. This early form example is in excellent condition and could be put directly to use. The original threaded rod and brass fixing nut are included with the knob. Length = 2.00 Inches (Ref. Id No.: 458976) [Free Shipping]

Orig. Cutter Bolt/Wing Nut for Type 3 Stanley No. 46 Skew – Plane- mjdtoolparts

An ORIGINAL CUTTER BOLT AND WING NUT for a Stanley No. 46 plane by STANLEY. This plane component, which includes the original yoke and screw to secure the cutter bolt in the plane body, came from a “Type 3” version of the No. 46. It is in excellent condition and could be put directly to use. Length = 1.00 Inches (Ref. Id No.: 459114) [Free Shipping]

Founder’s Grade Fence for “Type 3” Stanley No. 79 Plane – Unused – mjdtoolparts

A FOUNDER’S GRADE FENCE FOR A STANLEY NO. 79 SIDE RABBET PLANE. This Type 3 version is frequently missing from the plane. The original fixing screws to secure the fence to the plane body and regulate the depth of cut are included with the fence. This example is in top condition and could be put directly to use. As good as they get. Length = 5.00 Inches (Ref. Id No.: 475286) [Free Shipping]

Orig. “Type 11” TM Iron & Chip Brkr. for Stanley No. 3 Plane – mjdtoolparts

An ORIGINAL CUTTING IRON AND CHIP BREAKER for a Stanley No. 3 or 5 1/4 plane by STANLEY. The cutting iron is marked with the ca. 1912 V-shape trademark on this clean and ready to use example. The blade measures one and three-quarter inches in width. This is the proper cutting iron for “Type 11” and “Type 12” Stanley bench planes. Length = 7.00 Inches (Ref. Id No.: 408738) [Free Shipping]

Orig. “Type 13″ 1 3/8” Frog & Screws for Stanley No. 3/5 1/4 Planes-mjdtoolparts

An ORIGINAL FROG MECHANISM for Stanley 3 or 3 C smoothing plane by STANLEY. This plane, which came from a “Type 13” version of the No. 3 plane, has the frog adjustment feature introduced beginning with Type 10 Stanley planes. It will work with all Stanley No. 3 planes of Type 10 through Type 15. The original fixing screws and washers to secure the frog to the plane body are included with the frog. Length = 4.50 Inches (Ref. Id No.: 363229) [Free Shipping]

Orig. Rosewood Handle & Screws for Stanley No. 3 Planes -Type 15- mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD REAR HANDLE for a Stanley No. 3 or 3 C bench plane by STANLEY. This handle, which came from a Type 15 Stanley plane appears never to have been used. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.25 Inches (Ref. Id No.: 449260) [Free Shipping]

Orig. Early Type 3 Line 2″ Cap for Stanley No. 604 & 605 Planes – mjdtoolparts

An ORIGINAL BEDROCK LEVER CAP for a Stanley No. 604, 604 C, 605 or 605 C Bedrock two-inch width smoothing or jack plane by STANLEY. This lever cap is cast with the name “STANLEY R. & L. Co. BED ROCK” on this two-inch width lever cap, which is absent any chips, cracks or other apologies. Length = 5.25 Inches (Ref. Id No.: 416309) [Free Shipping]

Rare Stanley 5 1/2, 605 1/2 Early Cutting Iron – 2 1/4 Inch – mjdtoolparts

A rare EARLY PATTERN 2 1/4″ WIDTH CUTTING IRON by Stanley. Early versions of the No. 5 1/2 and No. 605 1/2 series used this iron, which was unique those Stanley planes. The No. 5 1/2 was changed to use the 2 3/8″ width iron used on the No. 4 1/2, 6 and 7 beginning in 1939. This 2 1/4″ width example is marked with the Sweetheart trademark and is in excellent working condition. Length = 7.63 Inches (Ref. Id No.: 440160) [Free Shipping]

Orig. 1 1/2″ Cap/Screw for No. 190 Rabbet Plane- “S” Casting- mjdtoolparts

An ORIGINAL CAP IRON AND TENSIONING SCREW for a Stanley No. 190 rabbet plane by STANLEY. This frequently missing, damaged or degraded cap is in excellent condition, retaining fully 90% of its original black japan finish. This early cap has the cast iron, nickel plated fixing screw that is cast with the Stanley name. The cap measures 1 1/2″ in width. Length = 3.75 Inches (Ref. Id No.: 425282) [Free Shipping]

Shouldered Screw for Stanley No. 78 Depth Stop – Also 190 Series – mjdtoolparts

AN ORIGINAL SHOULDERED SCREW FOR A STANLEY RABBETING PLANE. This screw is used to secure the front cast iron depth stop in place on the Stanley No. 78 duplex rabbet & filletster plane as well as Stanley cast iron rabbeting planes Nos. 180, 181, 182, 190, 191 and 192. This example is in excellent condition and could be put directly to use. Length = 1.25 Inches (Ref. Id No.: 332074) [Free Shipping]