Orig. Transitional Body for Stanley No. 27 1/2 Plane- 95% – mjdtoolparts

A FOUNDER’S GRADE TRANSITIONAL PLANE BODY for a Stanley No. 27 1/2 transitional heavy jack plane by STANLEY. Fully 98% of the original black japan and lacquer finishes remain on this essentially unused plane body. As good as they get. Length = 15.00 Inches (Ref. Id No.: 462068) [Free Shipping]

Stanley No. 27 – 1/2 Inch Beading Tool-for No. 45/55 Planes- mjdtoolparts

An ORIGINAL 1/2 INCH WIDTH BEADING TOOL CUTTING IRON, No. 27, by STANLEY. This blade was supplied with the No. 45 and No. 55 combination planes. It will also work with the No. 405 combination plane produced by the Record Tool Works of Sheffield, England. This example is in excellent condition and could be put directly to use. Length = 3.50 Inches (Ref. Id No.: 333391) [Free Shipping]

Orig. Tropical Hardwood Handle for Stanley No. 13 Plane – Decal – mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD REAR HANDLE for a Stanley No. 3 or 5 1/4 bench plane by STANLEY. This extra clean handle has a great grain pattern to the rosewood and it is superb condition. Most of the original decal remains. on the handle. This handle, which came from a “Type 13” version of the No. 3, is in top condition and could be put directly to use. Length = 4.38 Inches (Ref. Id No.: 431815) [Free Shipping]

Founder’s Grade Cutter & Insert for Stanley G35 Transitional Plane- mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND INSERT for a Stanley “Gage” No. G 35 transitional plane by STANLEY. This two-inch width cutter retains its original attachment to engage the unique depth of cut engagement used on the Gage planes. It is ini top condition and could be put directly to use. This cutter will also work with the G 4 and G 5 iron body “Gage” planes. As good as they get. Length = 5.50 Inches (Ref. Id No.: 379837) [Free Shipping]

Founder’s Grade Cutter/Insert for Stanley Gage G4 & G5- Sweetheart- mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND INSERT for a Stanley No. G 4, G 5, G 4 C, G 5 C “Gage” pattern bench plane by STANLEY. This unused old hardware stock item includes the original fitting to secure the cutting iron to the depth of cut mechanism. A superb and unused Stanley cutting iron in original hardware store condition. Length = 5.63 Inches (Ref. Id No.: 390876) [Free Shipping]

Orig. Upward Bent Cam Lever for No. 65 Low Angle Block Plane – mjdtoolparts

An ORIGINAL CAM LEVER for adjusting the throat on a Stanley No. 65 block plane by STANLEY. This later type plane component is in unused condition and could be put directly to use. It has the upturned lever used on later versions of the Stanley aduustable throat block planes, but it will work with both early and later versions of the No. 65. This frequently missing part will also fit Stanley planes Nos. 9 1/2, 9 3/4, 16, 17, 15, 15 1/2, 18 and 19. Length = 1.50 Inches (Ref. Id No.: 476518) [Free Shipping]

Orig. Chip Breaker for Stanley No. 23, 24 & 35 Planes -2″ Width – mjdtoolparts

An ORIGINAL CHIP BREAKER for a Stanley transitional plane No. 24, 26 or 35 by STANLEY. It is in excellent condition and could be put directly to use. Chip breakers for Stanley transitional planes have the rectangular slot to receive the lateral adjustment mechanism set higher on the face owing to the increased depth of the body on wooden bodied planes. Length = 5.75 Inches (Ref. Id No.: 472042) [Free Shipping]

Orig. Complete Front Saw Guide for Stanley No. 460 Mitre Box- mjdtoolparts

An ORIGINAL COMPLETE FRONT SAW GUIDE ASSEMBLY for a Stanley No. 460 mitre box by STANLEY. This assembly has a tapered base that is secured to the moveable arm of the mitre box by a large slotted screw that is included with the saw guide assembly. The front saw guide has a different release mechanism from the rear saw guide as it is triggered by a the saw trip clamp, rather than by lifting the saw. This example is in essentially unused condition and it could be put directly to use restoring a Stanley No. 460 mitre box. Length = 17.50 Inches (Ref. Id No.: 415827) [Free Shipping]

Orig. 2 1/4″ Iron & Insert for Stanley Gage No. G6 Fore Plane – mjdtoolparts

An ORIGINAL CUTTING IRON AND INSERT FITTING for a Stanley “Gage” No. G6 or G6 C for plane by STANLEY. This uncommon 2 1/4″ width cutting iron is in top condition. The original screw on insert to secure the iron to the depth of cut adjustment mechanism is included as well. Both are in very little used condition. Length = 5.38 Inches (Ref. Id No.: 456883) [Free Shipping]

Orig. Plane Knob Fixing Screw – No. 5 Plane Low Knob Type – mjdtoolparts

An ORIGINAL KNOB BOLT AND BRASS NUT for a low knob version of the Stanley No. 5 jack plane by STANLEY. This bolt has the early type cylindrical brass nut to tighten the front knob to the plane body. It is in excellent condition and could be put directly to use. Length = 1.75 Inches (Ref. Id No.: 451376) [Free Shipping]

Orig. Rosewood Knob/Screw for Stanley No. 8 Plane – Type 14 – mjdtoolparts

An ORIGINAL LATER TYPE “TALL” FRONT KNOB for a Stanley No. 4 1/2 heavy smoothing plane, No. 8 or No. 8 C 24″ length jointer plane by STANLEY. This clean, sound and ready to use knob, which came from a “Type 14” version of the No. 8 plane, could be put directly to use. The planes of the “Type 14” version were the first to have the raised ring cast in the front of the bed to secure the handle and this knob has the distinctive tapered base designed to accommodate that raised ring. The original threaded rod and brass nut to secure the knob to the plane body are included as well. Length = 2.75 Inches (Ref. Id No.: 434927) [Free Shipping]

Orig. 1 5/8″ “Type 11” Iron for Stanley No. 18/19 Block Planes – mjdtoolparts

An ORIGINAL CUTTING IRON for a Stanley No. 18 block plane by STANLEY. This cutter, which is marked with the ca. 1915 V-shape “Type 11” trademark will fit Stanley block planes No. 9 1/4, 9 1/2, 15, 16, 17, 18 and 19. It is in excellent condition and could be put directly to use. Length = 4.50 Inches (Ref. Id No.: 449243) [Free Shipping]

Original Body for Stanley No. 4K 1/2 – Type 13 – 95% Japan Finish – mjdtoolparts

An extra clean CAST IRON PLANE BODY for a Stanley No. 4 1/2 heavy smoothing plane, Type 13 body by STANLEY. Fully 95% of the original black japan finish remains on this very little used plane body, which has a few small spots of pitting on the sides that will not adversely affect functionality. A great Instant Upgrade item in ready to use condition. Length = 9.00 Inches (Ref. Id No.: 472353) [Free Shipping]