2-SNAP RING PLIERS, (1-KD-446 7″, 1-UNBRANDED 6″) 1-SET (12) TIPS

The 2-SNAP RING PLIERS set includes 7″ Outer Ring pliers with the brand KD and a 6″ unbranded inter ring pliers, along with a set of (12) tips of different angles. These pliers are made in the United States and come with a California Prop 65 warning. Perfect for collectors or enthusiasts, these high-quality tools are designed for precision and ease of use in various projects and tasks.

Orig. 1 3/4″ “Type 5” Cutting Iron/Chip Brkr. for Sargent 408, 411- mjdtoolparts

An ORIGINAL CUTTING IRON for a No. 408, 408 C or 411 bench plane by Sargent & Company, New Haven, Connecticut. This 1 3/4 inch width cutting iron is marked with the “type 5” trademark showing the Sargent name and the number designation 408. It is in excellent working condition and could be put directly to use. Length = 6.50 Inches (Ref. Id No.: 359365) [Free Shipping]

Orig. Two-Inch Width Frog/Screws for “Type 11” No. 4 & 5 Planes – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Stanley 4, 4 C, 5 or 5 C plane by STANLEY. This later type frog is in excellent condition and could be put directly to use. It came from a “Type 11” version of the No. 5 and it has the yoke for the frog adjustment screw introduced by Stanley in 1910. The original fixing screws to secure the frog to the plane body are included as well, as is the frog adjustment screw. Length = 7.00 Inches (Ref. Id No.: 370538) [Free Shipping]

Original Lever Cap for Early Stanley No. 5 1/2- 2 1/4 Inches- mjdtoolparts

An ORIGINAL 2 1/4″ LEVER CAP for an early type Stanley No. 5 1/2 plane. The No. 5 1/2 was changed to the same 2 3/8 inch width as the No. 4 1/2, 6 and 7 in the early years of the Twentieth Century. This old style version measures 2 1/4 inches in width. It is cast with the Stanley name inside the Notched Rectangle logo and has the pre-kidney shape opening for the fixing screw. It is in excellent condition and could be put directly to use. Length = 5.75 Inches (Ref. Id No.: 346748) [Free Shipping]

Orig. L. & I.J. White 1909 General Line Catalogue – 174 Pages – mjdtoolparts

A 1909 GENERAL LINE CATALOGUE by the L. & I.J. White Company, Buffalo, New York. This 174 publication measures 9″ tall x 6″ wide. It is in nearly new condition. The full White line as it then existed is illustrated with engravings in this substantial and nearly perfectly preserved book. Length = 9.00 Inches (Ref. Id No.: 300000) [Free Shipping]

Orig. Rosewood Rear Handle for Sargent 22″ No. 422 Jointer Plane- mjdtoolparts

An EARLY AND ORIGINAL ROSEWOOD HANDLE for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This early handle, which came from a “Type 1” version of the No. 422 jointer plane, retains nearly all of its original finish. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.38 Inches (Ref. Id No.: 421142) [Free Shipping]

Orig. Horseshoe Lateral Frog for Sargent No. 422 Plane – 2 3/8″ – mjdtoolparts

An ORIGINAL FROG MECHANISM for an early type Sargent No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width frog is the early type with the so-called horseshoe lateral that was used on very early Sargent planes. This frog could be put directly to use restoring a plane having a missing, damaged or degraded frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 474458) [Free Shipping]

Founder’s Grade Iron/Chip Brkr. for Sargent No. 422 Plane, Type 5- mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with the “Type 5” trademark showing the Sargent name and is in excellent working condition. It is also marked with the “422” designation for the number of the plane on which it was originally provided. This iron and chip breaker would be appropriate for any Sargent bench plane that uses a 2 3/8 inch width cutting iron. As good as they get. Length = 7.88 Inches (Ref. Id No.: 473832) [Free Shipping]

Orig. Frog and adj. lever for Chaplin’s No. 422 Block Plane – 2″- mjdtoolparts

An ORIGINAL FROG AND ADJUSTMENT LEVER for a Chaplin’s Patent No. 422 adjustable throat extra wide block plane by Tower & Lyon, New York, New York. The frog mounts on a raised boss in the body and is secured by the small screw. The lever adjustment screws into a second raised boss behind the cutter and it engages the milled grooves on the base of the frog. Length = 3.25 Inches (Ref. Id No.: 347486) [Free Shipping]

Orig. Chip Breaker & Screw for Sargent No. 410, 418 or 422 Plane – mjdtoolparts

An ORIGINAL CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut with original screw. This 2 3/8″ width chip breaker is in top condition and could be put directly to use. The original screw to secure the chip breaker to the plane iron is included as well. Length = 6.00 Inches (Ref. Id No.: 471722) [Free Shipping]

Orig. Later Type Mahogany Handles for Sargent No. 418, 422 Planes- mjdtoolparts

An ORIGINAL LATER TYPE MAHOGANY FRONT KNOB AND REAR HANDLE for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. These handles, which have Sargent’s later type “tall” front knob, will also work with the Sargent No. 410 and No. 418 planes. The original screws to secure the handles to the plane body are included as well. Length = 4.38 Inches (Ref. Id No.: 457377) [Free Shipping]

Founder’s Grade 2 3/8″ Iron/Chip Brkr. for Sargent No. 422 Plane – mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width cutter is marked with the early Sargent “Type 2” oval logo and is in top condition. Early Sargent irons were not marked with the specifict product number and this iron and chip breaker would be appropriate for any early Sargent bench plane that uses a 2 3/8 inch width cutting iron. As good as they get. Length = 8.00 Inches (Ref. Id No.: 388067) [Free Shipping]

Founder’s Grade Early Rosewood Hdl./Knob for Sargent No. 422 Plane- mjdtoolparts

A PAIR OF FOUNDER’S GRADE EARLY TYPE ROSEWOOD HANDLES for a Sargent No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. Handles fashioned from Brazilian Rosewood were used on only the earliest Sargent planes. These handles came from a “Type 2” version of the No. 418 and look to have been little, if ever, used. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. As good as they get. Length = 4.50 Inches (Ref. Id No.: 396802) [Free Shipping]

Orig. Lever Cap for Sargent Planes No. 410, 418 & 422-Cast w/ No. – mjdtoolparts

An ORIGINAL LEVER CAP for Sargent No. 422 2 3/8 inch width jointer plane by Sargent & Company, New Haven, Connecticut. This cutter, which is cast with the designation 418 on the back, will also fit the Sargent No. 410 heavy smooothing plane and the Sargent No. 418 fore plane. Length = 7.00 Inches (Ref. Id No.: 362444) [Free Shipping]

Orig. Blade & Chip Breaker for Sargent No. 422 Jtr. Plane- 2 3/8″- mjdtoolparts

An ORIGINAL CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with the “Type 5” trademark showing the Sargent name and is in excellent working condition. This iron and chip breaker would be appropriate for any Sargent bench plane that uses a 2 3/8 inch width cutting iron. Length = 7.88 Inches (Ref. Id No.: 390466) [Free Shipping]

Early Rosewood Knob/Screw for Type 1 Sargent No. 422 Plane- mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD FRONT KNOB for an early type Sargent No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This knob, which came from a “Type 1” Sargent jointer plane, is absent any chips, cracks or other apologies and could be put directly to use. The original threaded rod and brass nut to secure the knob to the plane body is included as well. Length = 2.00 Inches (Ref. Id No.: 421140) [Free Shipping]

Founder’s Grade Body for Sargent No. 422 Jointer Plane – 98% – mjdtoolparts

A FOUNDER’S GRADE LATER TYPE CAST IRON PLANE BODY for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. Fully 98% of the original black japan finish remains on this Instant Upgrade plane body, which uses a 2 3/8″ width cutting iron. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. As good as they get. Length = 14.00 Inches (Ref. Id No.: 473829) [Free Shipping]

Orig. Early Type Sargent 2 3/8″ Lever Cap – Mkd. “414 / 422” – mjdtoolparts

An EXTRA EARLY SMOOTH FACE LEVER CAP for a Sargent No. 410 heavy jack plane, No. 418 for plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This cap has a “keyhole” opening in the face and it has smooth casting. These caps were used only on “Type 1” and “Type 2” Sargent planes. The underside is cast with the designation marked “418/422”. It is designed for use with a 2 3/8″ width cutting iron. Length = 7.00 Inches (Ref. Id No.: 402163) [Free Shipping]

Orig. Cutting Iron for Sargent No. 422 Jointer Plane – Oval T.M. – mjdtoolparts

An ORIGINAL CUTTING IRON for a Sargent No. 422 jointer plane, No. 410 heavy smoothing plane or No. 418 fore plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with Sargent’s earliest, “Type 1”, oval form trademark at the top. It is in clean, sound and ready to use condition. Length = 8.00 Inches (Ref. Id No.: 429721) [Free Shipping]

Later Type Tall Mahogany Front Knob for Sargent No. 422 Plane-Screw-mjdtoolparts

A LATER TYPE TALL MAHOGANY FRONT KNOB for Sargent No. 410 heavy smooth plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. The original threaded rod and brass nut to secure the knob to the plane body are included as well. Length = 2.00 Inches (Ref. Id No.: 379809) [Free Shipping]

Orig. 2 3/8″ Iron for Sargent No. 422 Plane – “Type 4” T.M.- mjdtoolparts

An ORIGINAL CUTTING IRON for a Sargent No. 422 jointer plane, No. 410 heavy smoothing plane or No. 418 fore plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width cutter is marked with Sargent’s “V.B.M.” trademark, standing for “Very Best Made” as well as the No. 422 number designation. It is in excellent condition and could be put directly to use. Length = 7.75 Inches (Ref. Id No.: 437770) [Free Shipping]

Original Lever Cap for Sargent No. 422 Jointer Plane -V.B.M. Cast – mjdtoolparts

An ORIGINAL LEVER CAP for a Sargent No. 410, 418 or 422 2 3/8 inch width bench plane by Sargent & Company, New Haven, Connecticut. This cap is cast with the Sargent name in raised letters inside a recessed rectangle on the face, beneath which is a casting containging the letters V.B.M. – for Very Best Made, a Sargent motto. Length = 5.38 Inches (Ref. Id No.: 352489) [Free Shipping]

Orig. Plane Body for Sargent No. 422 Jointer Plane – 95% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. Fully 95% of the original black japan finish remains on this Instant Upgrade plane body, which uses a 2 3/8″ width cutting iron. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 14.00 Inches (Ref. Id No.: 446424) [Free Shipping]