Plow Dado Tool for No. 45 & 55 Planes- 3/4 Inch Width – No. 18 – mjdtoolparts

An ORIGINAL 3/4″ WIDTH PLOW DADO TOOL CUTTING IRON, No. 18, by STANLEY. This blade was supplied with the No. 45 and No. 55 combination planes. This cutting iron is designed to fit the Stanley No. 45 and No. 55 combination planes, and it will also work in the Record No. 405 combination plane produced by the Record Tool Works of Sheffield, England and the Large Combination Plane produced by Lee Valley Tools of Ottawa, Ontario, Canada. This example is in clean, sound and ready to use condition. Length = 3.50 Inches (Ref. Id No.: 461126) [Free Shipping]

Original Cap Iron & Screw for Gage G36 Plane – 2 1/4 Inch Width- mjdtoolparts

A FOUNDER’S GRADE SCREW LOCK CAP AND TENSIONING SCREW for a Stanley Gage No. 36 handled transitional smoothing plane by STANLEY. Fully 98% of the original black japan finish remains on this extra clean and ready to use cap, which is designed for use with the 2 1/4 inch width cutting iron used on the G 36. This cap will also work with the Stanley No. G 30 “Gage” transitional fore plane, which also uses a 2 1/4″ width cutting iron. As good as they get. Length = 3.13 Inches (Ref. Id No.: 405973) [Free Shipping]

Original Two-Inch Width Screw Cap for Siegley No. 4 Plane – mjdtoolparts

An ORIGINAL TWO-INCH WIDTH SCREW LOCK CAP for a Siegley No. 4 or 5 size plane by the Siegley Tool Company, Wilkes Barre, Pennsylvania. Fully 95% of the original nickel plating remains on this cap, which is cast with patent information in the tensioning screw. Length = 4.50 Inches (Ref. Id No.: 452341) [Free Shipping]

Orig. Screw Lock Cap for Gage No. 2 Plane – 1 3/4 Inch Width – mjdtoolparts

An ORIGINAL SCREW LOCK CAP for a Gage No. 2 transitional smoothing plane by the Gage Tool Company, Vineland, New Jersey. Fully 95% of the original black japan finish remains on this clean and ready to use cap, which measures just less than 1 3/4 inches in width. Length = 2.75 Inches (Ref. Id No.: 364635) [Free Shipping]

D. Maydole, Norwich, New York – Hammmer Catalogue & Booklet – 71 Pages

A copy of the pocket size catalogue “A CAPTAIN OF INDUSTRY” by the David Maydole Hammer Company, Norwich, New York. This 1923 Edition of 71 pages measures 6 inches in height by 3 inches in width. The booklet tells the story of the rise of David Maydole and includes a full catalogue of Maydole hammers and related tools offered at the time. Length = 6.00 Inches (Ref. Id No.: 464384) [Free Shipping]

Orig. 1 1/4″ Cutting Iron for “Keen Kutter” No. KK240 “Scrub” Plane-mjdtoolparts

An ORIGINAL 1 1/4″ WIDTH CUTTING IRON for a “Keen Kutter” No. 240 “scrub” plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This frequently missing, damaged or degraded cutting iron is marked at the top with the Keen Kutter logo and it retains its original convex form grinding on the leading edge. It is in excellent condition and could be put directly to use. Length = 6.25 Inches (Ref. Id No.: 451951) [Free Shipping]

Orig. 2″ Width Frog for Simmons “Keen Kutter” No. KK 4 or KK 5 – mjdtoolparts

An ORIGINAL FROG MECHANISM for an E.C. Simmons Keen Kutter KK 4 smooth plane or KK 5 jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. The KK designation planes were produced for Simmons by the Ohio Tool Company of Columbus, Ohio. This example is in clean, sound and ready to use condition, retaining some 85% of its original black japan finish. It could be put directly to use on an appropriate size plane. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 447888) [Free Shipping]

Orig. Iron for Keen Kutter No. KK 120 Lever Adjust Block Plane – mjdtoolparts

An ORIGINAL 1 5/8″ WIDTH CUTTING IRON for an E.C. Simmons “Keen Kutter” No. KK 120 lever-adjust block plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This iron, which would have been produced for Simmons by the Ohio Tool Company, is in essentially unused condition. It has a gear rack affixed to the rear of this top bevel grind iron to engage the depth of cut mechanism on the No. KK 120. Length = 5.00 Inches (Ref. Id No.: 379397) [Free Shipping]

Founder’s Grade “Keen Kutter” No. KK 78 Rabbet & Filletster Plane – mjdtoolparts

A FOUNDER’S GRADE “KEEN KUTTER” RABBET PLANE, No. KK 78, by the E.C. Simmons Hardware Company, St. Louis, Missouri. Fully 99% of the original black japan finish remains on this essentially unused example, which was produced for the E.C. Simmons Company by the Ohio Tool Company of Columbus, Ohio. It is complete with all original parts, including the depth stop, fixing screw, fence, rod and screw. The cutting iron is marked with the Keen Kutter logo. As good as they get. Length = 10.00 Inches (Ref. Id No.: 429172) [MediumFlatRate]

Orig. 1 3/4″ Plane Body for KK 3 Smoothing Plane- 75% Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons “Keen Kutter” No. KK 3 smoothing plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This body, which is designed for use with a cutting iron measuring 1 3/4 inches in width, retains approximately 75% of its original black japan finish. There is some very light pitting on the sole, but this body is otherwise in excellent condition and could be put directly to use. Length = 8.00 Inches (Ref. Id No.: 379152) [Free Shipping]

Orig. Plane Body for KK 5 1/2 Jack Plane- 2 1/4″ – 95% Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for “Keen Kutter” No. KK 5 1/2 heavy jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane body, which is designed for use with a cutting iron measuring 2 1/4″ in width, retains fully 95% of its original black japan finish. The plane, which is cast with the KK 5 1/2 number designation on the top of the toe, was produced for Simmons by the Ohio Tool Company. A great Instant Upgrade item. Length = 15.00 Inches (Ref. Id No.: 390073) [Free Shipping]

Orig. Frog Mechanism. for Keen Kutter KK 3 or KK 3 C Planes – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Keen Kutter No. KK 3 smoothing plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane component is in top condition and could be put to use replacing a damaged or degraded frog on a Keen Kutter 1 3/4 inch width smoothing plane. The original fixing screws and washers to secure the frog to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 455306) [Free Shipping]

Orig. Plane Body for KK 4 Smooth Plane- Two Inch – 85% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons Keen Kutter No. KK 4 smooth plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane designed for use with a two inch width cutting iron. Approximately 85% of the original black japan finish remains. Length = 9.00 Inches (Ref. Id No.: 352536) [Free Shipping]

Orig. Chip Brkr./Screw for E.C. Simmons KK4 and KK5 Planes – mjdtoolparts

An ORIGINAL CHIP BREAKER AND FIXING SCREW for a No. KK 4 “Keen Kutter” smooth plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This chip breaker, which was produced for Simmons by the Ohio Tool Company of Columbus, Ohio, includes the with original fixing screw to secure the chip breaker to the cutting iron. This two-inch width chip breaker will work with both the KK 4 and KK 5 planes as well as their corrugated sole equivalents. Length = 5.13 Inches (Ref. Id No.: 448738) [Free Shipping]

Orig. Plane Body for KK 4 Smoothing Plane-Two Inch – 90% Paint – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Keen Kutter KK 4 smoothing plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This body, which is designed for use with a two-inch width cutting iron, is in excellent condition, retaining a full 90% of its original black japan finish. Length = 9.00 Inches (Ref. Id No.: 343274) [Free Shipping]

Orig. Plane Body for KK 5 Jack Plane- Two Inch – 95% Japan Finish – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for an E.C. Simmons Keen Kutter No. KK 5 jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. Fully 95 of the original black japan finish remains and this plane appears to have been very little used. It is absent any chips, cracks or other apologies and could be put directly to use. Length = 14.00 Inches (Ref. Id No.: 424496) [Free Shipping]

Orig. Plane Body for KK 5 1/2 Jack Plane- 2 1/4″ -Enhanced Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for “Keen Kutter” No. KK 5 1/2 C heavy jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This plane body, which is designed for use with a cutting iron measuring 2 1/4″ in width, has had its black japan finish “enhanced” by a previous owner. The plane, which is cast with the KK 5 1/2 number designation on the top of the toe, was produced for Simmons by the Ohio Tool Company. Length = 15.00 Inches (Ref. Id No.: 388126) [Free Shipping]

Orig. Cap for Keen Kutter KK 5 1/2 Plane – 2 1/4″ – Excellent – mjdtoolparts

An ORIGINAL LEVER CAP for for an E.C. Simmons “Keen Kutter” No. KK 5 1/2 or KK 5 1/2 C heavy jack plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. This chip breaker, which is designed for use with a cutting iron measuring 2 1/4″ in width, is in excellent condition, noting some very minor roughage to the leading edge, and could be put directly to use. Length = 5.25 Inches (Ref. Id No.: 390069) [Free Shipping]

Orig. Beech Handle & Front Knob for Keen Kutter KK 31 Plane – mjdtoolparts

An ORIGINAL BEECH FRONT KNOB AND REAR HANDLE for an E.C. Simmons “Keen Kutter” No. KK 31 transitional jointer plane by the E.C. Simmons Hardware Company, St. Louis, Missouri. These handles, which were included on the planes produced for Simmons by the Ohio Tool Company, are in super condition, and could be put directly to use restoring a an early type Keen Kutter fore or jointer plane. The original screws to secure the handle and knob to the plane body are included as well. Length = 4.50 Inches (Ref. Id No.: 401643) [Free Shipping]

Armstrong Mfg. Co., Bridgeport, Conn. – 1892 General Line Catalog – 56 Pages

A 1892 GENERAL LINE CATALOGUE by the Armstrong Manufacturing Company, Bridgeport, Connecticut. This 56 page catalogue measurs 7 inches in height by 5 inches in width. Taps and dies, pipe threading tools, wrenches and a variety of vises are documented and illustrated in this comprehensive catalogue. Length = 7.00 Inches (Ref. Id No.: 138949) [Free Shipping]