Orig. Screw Lock Cap for Seymour Smith & Son No. 4 Spokeshave – mjdtoolparts

An ORIGINAL SCREW LOCK CAP for a Seymour Smith No. 4 double spoke shave by Seymour Smith & Son, Oakville, Connecticut. The original tensioning screw to secure the cutting iron is included with this cap, which is in excellent conditoin, retaining some90% of its original black japan finish. Length = 2.13 Inches (Ref. Id No.: 363749) [Free Shipping]

Orig. Cutting Iron Screw Clamp for Otis A. Smith Fales Patent Plane-mjdtoolparts

An ORIGINAL CUTTER BOLT and locking cap for a Fales Patent combination plane by Otis A. Smith of Rockfall, Connecticut. This cast iron cap and brass fixing screw are in excellent condition and could be put directly to use restoring a Fales Patent plane having a missing, damaged or degraded cutter bolt and cap. Length = 2.00 Inches (Ref. Id No.: 475096) [Free Shipping]

Orig. Rear Handle for Otis A. Smith Fales Patent Plane – mjdtoolparts

An ORIGINAL MAHOGANY REAR HANDLE for a Fales Patent combination plane by Otis A. Smith, Rockfall, Connecticut. This knob is mounted to the plane body by a pair of screws. This example is in excellent condition and could be put directly to use. Length = 3.75 Inches (Ref. Id No.: 475098) [Free Shipping]

Orig. Nicker Spur for Otis A. Smith Fales Patent Plane – mjdtoolparts

An ORIGINAL NICKER SPUR for a Fales Patent combination plane as produced by Otis A. Smith of Rockfall, Connecticut. This nicker, which is designed to fit in a slot behind the front knob, is in excellent condition and could be put directly to use restoring a Fales Patent plane. Length = 1.50 Inches (Ref. Id No.: 475099) [Free Shipping]

Unused Stanley/North Brothers No. 331 5/32″ Yankee Screwdriver Bit-mjdtoolparts

An ORIGINAL UNUSED SCREWDRIVER BIT for a Stanley “Yankee” “Handyman” No. 133H or No. 233H spiral ratchet screwdriver by the North Brothers Division of Stanley Tools, Philadelphia,Pennsylvania. This screwdriver has a 5/32″ slotted tip and it is in unused condition. Length = 2.25 Inches (Ref. Id No.: 382524) [Free Shipping]

Unused Stanley/North Brothers No. 3111 1/4″ Yankee Screwdriver Bit-mjdtoolparts

An ORIGINAL AND UNUSED SLOTTED SCREWDRIVER BIT, No. 3111, for a Stanley or North Brothers Yankee No. 31 A or No. 131 A spiral ratchet screwdriver by the North Brothers Division of Stanley Tools, New Britain, Connecticut. This 1/4 inch tip screwdriver is designed for slotted screws in sizes in sizes 6 through 10. Length = 4.00 Inches (Ref. Id No.: 368878) [Free Shipping]

Unused “Yankee” No. 4595 Fluted 1 1/2″ Screwdriver – North Bros. – mjdtoolparts

An UNUSED 1 1/2″ BLADE “YANKEE” SCREWDRIVER, No. 4595, by the North Brothers Division of Stanley Tools, Philadelphia, Pennsylvania. This fluted handle grip screwdriver is in original hardware store condition, retinaing some 99% of its original blue enamel finish. It is marked on the handle with the Stanley name, “Yankee” designation and product number. Length = 4.25 Inches (Ref. Id No.: 389897) [Free Shipping]

Unused Stanley/North Brothers No. 3113 5/16″ Yankee Screwdriver Bit-mjdtoolparts

An ORIGINAL AND UNUSED SLOTTED SCREWDRIVER BIT, No. 3113, for a Stanley or North Brothers Yankee No. 31 A or No. 131 A spiral ratchet screwdriver by the North Brothers Division of Stanley Tools, New Britain, Connecticut. This 5/16 inch tip screwdriver is designed for slotted screws in sizes in sizes 10 through 16. Length = 4.00 Inches (Ref. Id No.: 368883) [Free Shipping]

Orig. North Bros. “Yankee” Screwdriver Accessory Price Card – mjdtoolparts

An ORIGINAL ACCESSORY PRICE SHEET for “Yankee” push drills and screwdrivers by the North Brothers Division of Stanley Tools, Philadelphia, Pennsylvania. This sheet, which is printed on heavy stock pink paper, has a metal reinforced “hang” hole at the top to allow the price listing do be displayed for ready reference. It is in excellent condition, noting that someone saw fit to write, “Do not use these prices” at the top. Indeed. Length = 11.00 Inches (Ref. Id No.: 391133) [Free Shipping]

Stanley/North Bros. No. 68-601 Yankee No. 1 Sq. Drive S’driver Bit- mjdtoolparts

An UNUSED NO. 1 SIZE SQUARE DRIVE SCREWDRIVER BIT, No. 68-601 for “Yankee” spiral ratcheting screwdrivers No. 30, 130 and 130 B by the North Brothers Division of Stanley Tools, Philadelphia, Pennsylvania. This uncommon bit is in unused, original condition and could be put directly to use. Length = 3.00 Inches (Ref. Id No.: 429660) [Free Shipping]

Unused Stanley/North Brothers No. 3180 Yankee Drill Point Adapter -mjdtoolparts

An ORIGINAL AND UNUSED DRILL BIT CHUCK ADAPTER, No. 3180, for a Stanley “Yankee” No. 31A or No. 131A spiral ratchet screwdriver by the North Brothers Division of Stanley Tools, Philadelphia, Pennsyvlania. This device has a 5/16″ diameter as to the screwdriver bits for the 31 and 131 screwdrivers. It is designed to secure in the slot to hold the screwdriver bit in the No. 31A and 131A screwdrivers to allow it to hold the smaller size drill points used on the “Yankee” No. 41 and No. 44 push drills. It is in unused condition and could be put directly to use. Length = 1.50 Inches (Ref. Id No.: 385579) [Free Shipping]

Unused Stanley/North Brothers No. 3012 1/4″ Yankee Screwdriver Bit-mjdtoolparts

An ORIGINAL AND UNUSED SLOTTED SCREWDRIVER BIT, No. 3012, for a Stanley or North Brothers Yankee No. 30 A or No. 130 A spiral ratchet screwdriver by the North Brothers Division of Stanley Tools, New Britain, Connecticut. This 1/4″ tip screwdriver is designed for slotted screws in sizes in sizes 6 through 10. Length = 4.00 Inches (Ref. Id No.: 388318) [Free Shipping]

E.C. Atkins & Company, Indianapolis – 1895 General Line Catalog – 136 Pages

An original 1895 EDITION GENERAL LINE CATALOGUE by E.C Atkins & Company, Indianapolis, Indiana. This 136 pages catalog measaures 6 1/2 inches in height by 4 1/4 inches in width. The full line of Atkins saws and related tools for lumbermen and saw mills is documented and illustrated in this comprehensive catalogue. Length = 6.50 Inches (Ref. Id No.: 123725) [Free Shipping]

Orig. 1895 Ridgway & Son “Perfectoin” Water Wheel 112 Page Booklet- mjdtoolparts

An ORIGINAL WATER WHEEL PROMOTIONAL BOOKLET as produced by Craig Ridgway & Son of Coatesville, Pennsylvania. This substantial softbound publication of 112 pages illustrates specifications, recommendations for usage as well as detailed diagrams and charts precisely describing the offerings of this special purpose company. The book measures 9″ in height by 6″ wide and it is in excellent collector quality condition. Length = 9.00 Inches (Ref. Id No.: 461193) [Free Shipping]

Orig. 1927 Supplee-Biddle 850 Page Gen. Line Catalogue – mjdtoolparts

An ORIGINAL CATALOGUE OF HARDWARE AND TOOLS by the Supplee-Biddle Hardware Company of Philadelphia, Pennsylvania. This 1927 Edition clothbound catalogue, No. 27, includes 850 pages of tools and related items. It measures 9 3/4″ tall by 8″ wide. There is some torn binding on the spine, but it is othewise in excellent condition and it documents the Supplee-Biddle line as it existed at the time of publication. Length = 9.75 Inches (Ref. Id No.: 470643) [Free Shipping]

Extra Clean 1 13/16″ Tapered Single Cutting Iron- Humphreysville – mjdtoolparts

An ORIGINAL 1 13/16″ WIDTH SINGLE CUTTING IRON for a wooden bench plane by the Humphreysville Manufacturing Company, Seymour, Connecticut. This tapered cutting iron is in superb condition and could be put directly to use in an appropriate size plane or if you are making your own plane. Length = 6.88 Inches (Ref. Id No.: 392063) [Free Shipping]

Extra Clean Long 13/16″ Dbl. Spur Auger Bit – Snell Mfg. Company – mjdtoolparts

An EXTRA CLEAN 13/16″ DIAMETER, 22 1/2″ LENGTH, SHIP TYPE AUGER BIT by the Snell Manufacturing Company, Fiskdale, Massachusetts. This bit has a small lead screw and is without spurs on the outside of the leading face. It has a tapered shank designed to accommodate the jaws of a ratchet bit brace. This essentially unused condition auger bit could be put directly to use. Length = 18.00 Inches (Ref. Id No.: 397949) [Free Shipping]

Extra Clean Long 5/8″ Sgl. Spur Auger Bit – Snell Mfg. Company – mjdtoolparts

An EXTRA CLEAN 5/8″ DIAMETER, 28 1/2″ LENGTH, SINGLE SPUR AUGER BIT by the Snell Manufacturing Company, Fiskdale, Massachusetts. This bit has a lead screw and a tapered shank designed to accommodate the jaws of a ratchet bit brace. This essentially unused condition auger bit could be put directly to use. Length = 18.00 Inches (Ref. Id No.: 430813) [Free Shipping]

Early S.R. & L. Co. Arch T.M. Cutter for No. 192 – 1″- Little Used- mjdtoolparts

An ORIGINAL CUTTING IRON FOR A STANLEY NO. 192 ONE-INCH WIDTH RABBET PLANE by STANLEY. This little used iron is marked with the Stanley Rule & Level Company arch trademark used in the 1880’s and 1890’s. It is in clean, sound and ready to use condition and could be put directly to work. Length = 4.00 Inches (Ref. Id No.: 421145) [Free Shipping]