Orig. 1 3/4″ Iron & Insert for O.V.B. “Gage” No. 22 PLane – mjdtoolparts

An ORIGINAL 1 3/4″ CUTTING IRON AND INSERT PIECE for an O.V.B. brand No. 22 “Gage” type by the Hibbard, Spencer & Bartlett Company, Chicago, Illinois. This iron was made by H.S. & B. by Stanley and it will also work with the G3 and G 3 C smooth planes produced by Stanley. It is in excellent condition and could be put directly to use. Length = 5.13 Inches (Ref. Id No.: 457689) [Free Shipping]

Orig. Box for Starrett No. 22 C Drill Point Gauge – mjdtoolparts

An EXTRA CLEAN ORIGINAL PASTEBOARD BOX for an L.S. Starrett No. 22 C drill point gauge by the L.S. Starrett Company, Athol, Massachusetts. This box is in top condition, retaining its full, original paper label and having four intact corners on both the top and bottom section of the box. Length = 6.63 Inches (Ref. Id No.: 422483) [Free Shipping]

Orig. Stanley Toothing Iron – No. 22 Size – No. 112, 12, 12 1/2 – mjdtoolparts

An ORIGINAL 22 GROOVES PER INCH SCRAPER PLANE CUTTING IRON by STANLEY. These irons, which were designed to perform the function of a “toothing” plane in roughing the surface for glue to secure veneer, were offered in three different sizes. This example is in excellent condition and it is boldly marked with the early Stanley Rule & Level Co. “block letter” form trademark used in the early years of the Twentieth Century. The blade will fit Stanley scrapers No. 112, 12, 12 1/2 and 12 3/4. Length = 5.00 Inches (Ref. Id No.: 447465) [Free Shipping]

Orig. Catalogue of Tools & Hdwe Itsms- John Stortz & Son, No. 22 – mjdtoolparts

An ORIGINAL 1922 GENERAL LINE TOOL CATALOGUE by John Stortz & Son, Philadelphia, Pennsylvania. The entire line of tools and “hardware specialites” offered at the time of publication by this prominent Philadelphia merchant are documented and illustrated in this 126 page softbound catalogue. All manner of ooks , knives , scrapers, hammers, ice harvesting tools, coopers’ tools, caulking irons and much much more are included in this comprehensive catalogue. Length = 11.00 Inches (Ref. Id No.: 409729) [Free Shipping]

Orig. Body for Millers Falls No. 22 Jointer Plane – 95% Japan – mjdtoolparts

An ORIGINAL EXTRA CLEAN CAST IRON PLANE BODY for a Millers Falls No. 22 jointer plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original black japan finish remains on this pristine plane body. An Instant Upgrade for a damaged or degraded Millers Falls No. 22 plane. Length = 22.00 Inches (Ref. Id No.: 386859) [Free Shipping]

Orig. Frog Assembly for No. 22 Union Mfg. Co. Plane-w/ Screws – mjdtoolparts

An ORIGINAL 1 3/4″ WIDTH FROG MECHANISM for a Union No. 22 transitional smoothing plane by the Union Manufacturing Company, New Britain, Connecticut. This frequently damaged or degraded plane component is in excellent condition and could be put directly to use restoring a No. 22 size Union plane. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 6.50 Inches (Ref. Id No.: 423517) [Free Shipping]

2 Vintage small unmarked planes ( Around 5 1/4 Inches Long )

2 Vintage small unmarked planes ( Around 5 1/4 Inches Long ) All of our tools are sold as we received them. With such a large lot we did not have time to clean them up. We have a very large group of old tools, over 600 planes, saws, levels etc. Please take the time to look over our other items. Email me if you have any questions Please leave positive feedback after you’ve received your item and then I will leave you feedback ! Thanks for looking at my auction! International Buyers: You are responsible for any taxes, duties or charges with international shipping that may be charged by your countries customs agency plus any additional shipping costs to ship international over domestic. Char 21/02 # 989 5C _gsrx_vers_1653 (GS 9.7.5 (1653))

Orig. 1 3/4″ “Type 5” Cutting Iron/Chip Brkr. for Sargent 408, 411- mjdtoolparts

An ORIGINAL CUTTING IRON for a No. 408, 408 C or 411 bench plane by Sargent & Company, New Haven, Connecticut. This 1 3/4 inch width cutting iron is marked with the “type 5” trademark showing the Sargent name and the number designation 408. It is in excellent working condition and could be put directly to use. Length = 6.50 Inches (Ref. Id No.: 359365) [Free Shipping]

Orig. Two-Inch Width Frog/Screws for “Type 11” No. 4 & 5 Planes – mjdtoolparts

An ORIGINAL FROG MECHANISM for a Stanley 4, 4 C, 5 or 5 C plane by STANLEY. This later type frog is in excellent condition and could be put directly to use. It came from a “Type 11” version of the No. 5 and it has the yoke for the frog adjustment screw introduced by Stanley in 1910. The original fixing screws to secure the frog to the plane body are included as well, as is the frog adjustment screw. Length = 7.00 Inches (Ref. Id No.: 370538) [Free Shipping]

Vintage Millers Falls Co. Level Cast Iron 2 1/2″ Bubble / Spirit Level 1890

This is a Rare Antique Millers Falls Co. cast iron bubble/spirit level from “1890”. The level measures 2 1/4″ inches long 8 1/16″ wide and 5/8″ high. The bubble is intact. Might have been attached to a breast speed drill or a knee brace drill of some kind? Stamped on top, MILLERS FALLS CO. PATd JAN 21ST 1890. Pre-owned has signs of use, works as it should. Solid. Super cool to own or use. Remember the Bubble is intact and works!

Original Lever Cap for Early Stanley No. 5 1/2- 2 1/4 Inches- mjdtoolparts

An ORIGINAL 2 1/4″ LEVER CAP for an early type Stanley No. 5 1/2 plane. The No. 5 1/2 was changed to the same 2 3/8 inch width as the No. 4 1/2, 6 and 7 in the early years of the Twentieth Century. This old style version measures 2 1/4 inches in width. It is cast with the Stanley name inside the Notched Rectangle logo and has the pre-kidney shape opening for the fixing screw. It is in excellent condition and could be put directly to use. Length = 5.75 Inches (Ref. Id No.: 346748) [Free Shipping]

Orig. L. & I.J. White 1909 General Line Catalogue – 174 Pages – mjdtoolparts

A 1909 GENERAL LINE CATALOGUE by the L. & I.J. White Company, Buffalo, New York. This 174 publication measures 9″ tall x 6″ wide. It is in nearly new condition. The full White line as it then existed is illustrated with engravings in this substantial and nearly perfectly preserved book. Length = 9.00 Inches (Ref. Id No.: 300000) [Free Shipping]

SARGENT 107-16 wood block plane 1 5/8″ MADE IN USA SEARS PLANE

The SARGENT 107-16 wood block plane is a classic tool made in the USA by the well-known brand, SARGENT. With a 2″ width and 7 1/8″ length, this antique original piece is a collectible item for woodworking enthusiasts. This high-quality, all-American made plane is a great addition to any carpentry or woodworking collection, showcasing the craftsmanship and history of American tools.

Orig. Rosewood Rear Handle for Sargent 22″ No. 422 Jointer Plane- mjdtoolparts

An EARLY AND ORIGINAL ROSEWOOD HANDLE for a Sargent No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This early handle, which came from a “Type 1” version of the No. 422 jointer plane, retains nearly all of its original finish. The original threaded rod and brass nut to secure the handle to the plane body is included as well. Length = 4.38 Inches (Ref. Id No.: 421142) [Free Shipping]

Orig. Horseshoe Lateral Frog for Sargent No. 422 Plane – 2 3/8″ – mjdtoolparts

An ORIGINAL FROG MECHANISM for an early type Sargent No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8 inch width frog is the early type with the so-called horseshoe lateral that was used on very early Sargent planes. This frog could be put directly to use restoring a plane having a missing, damaged or degraded frog. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 474458) [Free Shipping]

Founder’s Grade Iron/Chip Brkr. for Sargent No. 422 Plane, Type 5- mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Sargent No. 410 heavy smoothing plane, No. 418 fore plane or No. 422 jointer plane by Sargent & Company, New Haven, Connecticut. This 2 3/8″ width cutter is marked with the “Type 5” trademark showing the Sargent name and is in excellent working condition. It is also marked with the “422” designation for the number of the plane on which it was originally provided. This iron and chip breaker would be appropriate for any Sargent bench plane that uses a 2 3/8 inch width cutting iron. As good as they get. Length = 7.88 Inches (Ref. Id No.: 473832) [Free Shipping]

Orig. Frog and adj. lever for Chaplin’s No. 422 Block Plane – 2″- mjdtoolparts

An ORIGINAL FROG AND ADJUSTMENT LEVER for a Chaplin’s Patent No. 422 adjustable throat extra wide block plane by Tower & Lyon, New York, New York. The frog mounts on a raised boss in the body and is secured by the small screw. The lever adjustment screws into a second raised boss behind the cutter and it engages the milled grooves on the base of the frog. Length = 3.25 Inches (Ref. Id No.: 347486) [Free Shipping]

Orig. Lever Cap for Sargent Planes No. 410, 418 & 422-Cast w/ No. – mjdtoolparts

An ORIGINAL LEVER CAP for Sargent No. 422 2 3/8 inch width jointer plane by Sargent & Company, New Haven, Connecticut. This cutter, which is cast with the designation 418 on the back, will also fit the Sargent No. 410 heavy smooothing plane and the Sargent No. 418 fore plane. Length = 7.00 Inches (Ref. Id No.: 362444) [Free Shipping]