An ORIGINAL BOX FOR A 7/8″ BEVEL EDGE CHISEL, No. LN-BE7/8, by the Lie-Nielsen Tool Works, Warren, Maine. This original box is in essentially unused condition and is marked on both the top and the end of the box. Length = 11.75 Inches (Ref. Id No.: 447969) [Free Shipping]
Archives
Founder’s Grade 2 5/8″ Width Lie-Nielsen Iron for No. 8 & 608 – mjdtoolparts
A FOUNDER’S GRADE 2 5/8″ WIDTH CUTTING IRON for a No. 8 bench plane by the Lie-Nielsen Tool Works, Warren, Maine. This old hardware stock iron is in unused, original factory condition and could be put directly to use. As good as they get. Length = 8.00 Inches (Ref. Id No.: 470863) [Free Shipping]
Orig. Early Box for Lie-Nielsen LN-66 Scratch Beader – Unused – mjdtoolparts
An ORIGINAL EARLY TYPE LIE-NIELSEN BOX for No. 66 scratch beader by the Lie-Nielsen Tool Works, Warren, Maine. This box dates from the early days of Lie-Nielsen. It is unused condition. There is no number marking on the outside of the box. Length = 7.25 Inches (Ref. Id No.: 467868) [Free Shipping]
Founder’s Grade 2 1/4″ Width Lie-Nielsen Iron for No. 5 1/2 – mjdtoolparts
A FOUNDER’S GRADE 2 1/4″ WIDTH CUTTING IRON for a No. 5 1/2 size plane by the Lie-Nielsen Tool Works, Warren, Maine. This uncommon 2 1/4″ width iron, which was produced for Hock Tools in France, has been hardened to A2 and it is so marked at the top of the iron. A top quality iron in ready to use condition. As good as they get. Length = 7.00 Inches (Ref. Id No.: 457045) [Free Shipping]
VINTAGE FULTON BENCH PLANE MARKED 3 – VERY GOOD COND
VINTAGE FULTON BENCH PLANE MARKED 3 – MADE IN THE USA OVERALL LENGTH – 1O INCHES X 2 9/16 INCHES WITH A 2 INCH WIDE CUTTING IRON WITH A PARTIAL LABEL ON THE TOTE CONDITION – VERY GOOD IT HAS SOME SMALL NICKS & SCRATCHES IN THE STEEL THE METAL HAS DARKENED WITH AGE THE WOODEN TOTE & FRONT KNOB HAS SOME PAINT & PAINT SPLATTER PLEASE TAKE A GOOD LOOK AT THE PICTURES
Antique bench BRACKET vise right angle wood carvers hold down vintage tool NO 1
Antique bench BRACKET vise right angle wood carvers hold down vintage tool NO 1. Condition is Used. Shipped with USPS Ground Advantage.
Vintage Clamp On Bench Vise Rare Size Anthol? Antique No Makers Mark Found
Estate find. Missing the small plate/washer at top of clamping screw. Handle is bent. Operates freely. Jaws are 2.75” wide and opens to 4”.
Antique bench BRACKET vise right angle wood carvers hold down vintage tool NO 1
Says it is an 1 1/2″ See pictures.
Solar MFG Co Antique Wooden Spirit Level 18 Inch
Great level. Center horizontal bubble works great. The other bubble for the vertical read is busted and can be repaired. Nice piece and is the perfect working size of a hand level. My favorite.
Solar Mfg. Co. Old Hardware Stock 1 3/4 Inch Cutting Iron – mjdtoolparts
An extra clean 1 3/4 inch TAPERED CUTTING IRON by the Solar Manufacturing Company. This tapered profile iron is marked with the imprint of this obscure maker in block letters. It looks to have been very little used. Length = 7.13 Inches (Ref. Id No.: 347498) [Free Shipping]
19TH C. W.M.C. ROSS 37 LIGHT ST. BALTIMORE WOODEN SHIP MOLDING PLANE
William C. Ross was born in Baltimore in 1817 and made planes from 1849 until 1869.
Orig. Boxwood Nuts & Washers for Wm. C. Ross Screw Arm Plow Plane – mjdtoolparts
BOTH ORIGINAL BOXWOOD NUTS AND MATCHING WASHERS for a William C. Ross unhandled plow plane by William C. Ross, 44 Light Street, Baltimore, Maryland. These nuts and washers are in excellent condition and could be put directly to use. Length = 1.75 Inches (Ref. Id No.: 430845) [Free Shipping]
Orig. Cutting Iron for Stanley Handyman No. H1204 Smooth Plane- 2″- mjdtoolparts
An ORIGINAL CUTTING IRON AND CHIP BREAKER for a Stanley No. H1204 Handyman smooth plane by STANLEY. This extra clean and little used iron and chip breaker are in ready to use condition. The iron is marked with the product number as well as the Handyman name. Length = 9.00 Inches (Ref. Id No.: 404388) [Free Shipping]
Orig. Later Type Box for Stanley No. H1204 Handyman Plane – mjdtoolparts
An ORIGINAL PASTEBOARD BOX for a Stanley later type “Victor” smoothing plane, No. 1104, by STANLEY. This extra clean box retains its full, original paper label. Length = 9.88 Inches (Ref. Id No.: 424038) [Free Shipping]
Orig. Lever Cap for Stanley H1204 Handyman Smooth Plane – 2″ – mjdtoolparts
An ORIGINAL CAST IRON NICKEL PLATED LEVER CAP for a Stanley No. H1204 smooth plane by STANLEY. Fully 98% of the original nickel plating remains on this cap, which is cast with the Stanley Handyman designation in a angled rectangular recess on the face that is filled with red japanning. Length = 5.50 Inches (Ref. Id No.: 363285) [Free Shipping]
Good User Vintage Stanley No. H1204 (12-204E)Type 20 Smooth Plane Inv#BR06
Here we have a fine hardly used Stanley No. H1204 Type 20 Ca 1962-67 (4 size) smooth plane that clean an ready-to-go. The blue painted tote and knob are in hardly used condition and with no cracks or repairs, only a few typical scars.
Orig. Cutter/Chip Breaker for Stanley No. H1204 Smooth Plane – 2″ – mjdtoolparts
An ORIGINAL CUTTING IRON AND CHIP BREAKER for a Stanley No. H1204 Handyman smooth plane by STANLEY. This extra clean and little used iron and chip breaker are in ready to use condition. The iron is marked with the product number as well as the Handyman name. Length = 9.00 Inches (Ref. Id No.: 422325) [Free Shipping]
Orig. Plane Body for Stanley Handyman H1204 Plane- Gray Japan – mjdtoolparts
An ORIGINAL CAST IRON PLANE BODY for a Stanley Handyman No. H1204 plane smooth plane by STANLEY. Fully 95% of the original gray japan finish remains on this very little used Instant Upgrade item. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 359359) [Free Shipping]
Founder’s Grade Iron & Chip Breaker for Stanley “Handyman” H1204- mjdtoolparts
A FOUNDER’S GRADE CUTTING IRON AND CHIP BREAKER for a Stanley “Handyman” smoothing plane, No. H1204 by STANLEY. “Made in England”. This essentially unused condition cutting iron is marked with the Stanley name, the “Handyman” logo and the designation “Made in England”. As good as they get. Length = 7.63 Inches (Ref. Id No.: 388720) [Free Shipping]
STANLEY No. 112 Scraper Plane with Original Stanley Iron “S” Casting Rosewood
Great example of a Stanley 112 cabinet makers and veneer scraper plane. “S” foundry casting on the sole. The tote and knob display the highly sought after beauty of Rosewood. Sole and wings are in pristine condition with less than expected staining and surface defects give the age of the tool.
Antique Plane W Rosewood Wedge G. Heyerick – Sorby Cast Steel Woodworking Tool
Antique Steel Plane W Rosewood Wedge G. Heyerick Wood Woodworking Tool. Solid steel plane is triple marked G. Heyerick ? May be a rare tool, as I could not find any info on the manufacturer. The plane is in good condition with a few marks on either side. The rear of block has a small separation at the weld. Original blade is good and needs sharpening. Blade is stamped I Sorby Cast Steel. I have not messed with it, and has original old patina. . See all photos
Wide 1 1/2″ H. Slater Rosewood Infill Shoulder Plane W. Marples & Sons Iron
There is little left to the iron, but plane is in great condition. It does show mild surface wear – but no abuse. The iron is stamped W. Marples & Sons Cast Steel.
STANLEY #SB 4~ ENGLISH~ VINTAGE BENCH PLANE~ EARLY/MID 20TH CENTURY
STANLEY No.SB 4 Smooth Plane.
Founder’s Grade Lever Cap for English Stanley No. SB-4 Plane – mjdtoolparts
A FOUNDER’S GRADE CAP for a later type Stanley No. SB-4 English made No. 4 size plane by Stanley Tools, Sheffield, England. This cap, which is in unused condition, retains fully 99% of its original black japan finish and the original Stanley label on the top. Length = 5.25 Inches (Ref. Id No.: 473469) [Free Shipping]
Orig. Plane Body for Stanley, England No. SB 4 Smooth Plane – mjdtoolparts
An ORIGINAL CAST IRON PLANE BODY for a Stanley No. SB4 later type smooth plane by Stanley Tools, Sheffield, England. Fully 98% of the original blue japan finish remains on this unused plane body. As good as they get. Length = 9.25 Inches (Ref. Id No.: 473472) [Free Shipping]