B.D. Washburn & Co. Catalogue – Agents for Star Tool Company- Full Line- 40 Pgs.

An 1874 GENERAL LINE HARDWARE CATALOGUE by B.D. Washburn & Company, Boston, Massachusetts. This early and important catalog documents and illustrates the full line of marking gauges, try squares and bevels offered by the Star Tool Company of Middletown, Connecticut, for whom B.D. Washburn served as agents in Boston. The 40 page catalog measures 9 1/2″ in height by 6″ in width. This is the only example of a catalog documenting and illustrating full Star Tool Company product line of which we are aware. Length = 9.50 Inches (Ref. Id No.: 311783) [Free Shipping]

Orig. Early Type 7/8″ Plough Iron for Stanley No. 50 Combo. Plane- mjdtoolparts

An ORIGINAL 7/8 INCH SIZE PLOUGH CUTTING IRON for a Stanley No. 50 combination plane by STANLEY. This cutter was one of six plough cutters added to the No. 50 in 1914. This is the early style and does not have the milled grooves in the back to engage the depth of cut adjustment lever introduced in 1936. Length = 3.25 Inches (Ref. Id No.: 366254) [Free Shipping]

Orig. 1 1/2″ Sash Iron for Sargent No. 1080/1085 Planes – mjdtoolparts

An EXTRA CLEAN 1 1/2″ SASH CUTTING IRON, No. 21, by Sargent & Company, New Haven, Connecticut. This cutting iron, which was the reverse of the profile on the No. 22 sash cutting iron, was provided with the Sargent No. 1080 and No. 1085 combination plane. This example is in unused condition and could be put directly to work. Length = 3.50 Inches (Ref. Id No.: 351573) [Free Shipping]

Orig. Cutting Iron for 2″ No. 5 & 605 Planes – “Type 11”- mjdtoolparts

An ORIGINAL CUTTING IRON FOR A STANLEY NO. 4 or 5 BENCH PLANE by STANLEY. This blade measures two-inches in width. It is marked with Stanley’s ca. 1915 era Type 11 V-shaped trademark. It is in clean, sound and ready to use condition and could be put directly to use. Length = 6.75 Inches (Ref. Id No.: 395959) [Free Shipping]

Orig. 2″ “Type 2” Iron for Sears Craftsman No. 5264 Smooth Plane – mjdtoolparts

An ORIGINAL “TYPE 2” TWO-INCH WIDTH CUTTING IRON for a Sears “Craftsman” brand No. 5264 smooth plane by Sears, Roebuck & Company, Chicago, Illinois. This two-inch cutter width plane is in essentially unused condition and it is marked on the top with the “Type 2” early Craftsman logo. Length = 7.50 Inches (Ref. Id No.: 451971) [Free Shipping]

Orig. 2 3/8″ Cap Iron for Birmingham No. 104 22″ Jointer Plane – mjdtoolparts

An ORIGINAL SCREW LOCK CAP for a Birmingham “Mosher’s Patent” No. 103 fore plane or No. 104 jointer plnne by the Birmingham Plane Manufacturing Company, Birmingham, Connecticut. This cap for a Mosher Patent plane measures 2 3/8″ in width. It is in excellent condition and could put directly to use. Length = 5.00 Inches (Ref. Id No.: 388729) [Free Shipping]

Lakeside Brand No. 9 1/2 Size Block Plane Cutting Iron – 1 5/8″ – mjdtoolparts

An original WARD’S LAKESIDE BRAND CUTTING IRON for No. 9 1/2 size plane by Montgomery Ward & Company, Chicago, Illinois. This 1 5/8″ width cutter is marked with the block letter Lakeside trademark. It has a series of milled grooves in the underside to engage the depth of cut adjustment mechanism. Length = 4.50 Inches (Ref. Id No.: 366335) [Free Shipping]

Restoration Grade Body for Stanley No. 8 Plane, Type 5- 60% Japan -mjdtoolparts

An ORIGINAL “TYPE 5” CAST IRON PLANE BODY for a Stanley No. 8 twenty-four inch length jointer plane by STANLEY. Fully 85% of the original black japan finish remains on this early “first lateral” version of the No. 8. The plane is absent any chips, cracks or other apologies and could be put directly to use. Length = 24.00 Inches (Ref. Id No.: 456165) [Free Shipping]

Knuckle Joint Cap for Stanley No. 18, 19, 65 Block Planes – 90% – mjdtoolparts

An ORIGINAL KNUCKLE JOINT CAP for a Stanley block plane by STANLEY. This pristine part is marked with the early block letter Stanley trademark. Fully 98% of the original nickel plating remains on this part, which is proper for a Stanley No. 65, 18 or 19 block plane. Length = 4.00 Inches (Ref. Id No.: 360913) [Free Shipping]

Orig. Plane Body for Stanley No. 5 Plane- Type 7 – 85% Japan – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Stanley No. 5 jack plane, Type 7, by STANLEY. Approximately 85% of the original black japan finish remains on this well preserved body, which is absent any chips, cracks or other apologies and could be put directly to use. The inside of the handle receiver is cast with the foundry designations “0” and “B” on this early Stanley plane body. If you have a plane having a chipped, damaged or degraded body, this clean and undamaged component will put you back in business. Length = 14.00 Inches (Ref. Id No.: 456285) [Free Shipping]

Early Pat. Date Iron/Chip Brkr. for Stanley No. 135 Plane – 2 1/8″ -mjdtoolparts

An ORIGINAL 2 1/8 INCH WIDTH CUTTING IRON AND CHIP BREAKER for a Stanley Liberty Bell handled smooth plane, No. 135, by STANLEY. The iron is marked with the early circular trademark, which includes the date of the 1876 Traut & Richards Patent under which the planes of the Liberty Bell series were produced. The original screw to secure the plane iron to the chip breaker and the screw having a raised ridge to engage the Justus A. Traut lever adjustment mechanism patented in 1876 are included as well. Length = 7.50 Inches (Ref. Id No.: 357124) [Free Shipping]

Reprint of July 1, 1872 Stanley Fanfold Pamphlet – Miller Patents – mjdtoolparts

A REPRINT OF A VERY EARLY STANLEY ADVERTISING PAMPHLET dated July 1, 1872 by STANLEY. This ten-page fanfold document illustrates the Miller Patent planes, shows a “Type 1” No. 9 3/4 on the cover, lists and illustrates the full line of cast iron and transitional bench planes and throws in promotional pages for the Wheeler Patent countersink, Stanley cabinet makers’ screwdrivers and a cabinet maker’s clamp. A great snapshot of the Stanley Rule & Level Company as it entered the plane making business in earnest. Length = 6.00 Inches (Ref. Id No.: 416917) [Free Shipping]

FREE SHIPPING: Cap Screw for Stanley Planes to Secure Chip Breaker- mjdtoolparts

An ORIGINAL CAP IRON FIXING SCREW for Stanley bench planes by STANLEY. This screw, which secures the chip breaker to the cutting iron is in excellent condition and could be put directly to use. Stanley used a non-standard thread for many of their parts, including this screw, which will fit Stanley bench planes No. 3 and higher. Length = 0.50 Inches (Ref. Id No.: 458893) [Free Shipping]

Founder’s Grade for Stanley No. 5 or 5 C Planes – Type 11 Version – mjdtoolparts

An FOUNDER’S GRADE FROG MECHANISM for a Stanley 4, 4 C, 5 or 5 C plane by STANLEY. This “Type 11” version has the yoke for the frog adjustment introduced by Stanley in 1910. It is in essentially unused condition, retaining 98% of its original black japan finish, and could be put directly to use. The original screws and washers to secure the frog to the plane body are included as well. As good as they get. Length = 4.50 Inches (Ref. Id No.: 456759) [Free Shipping]

Stanley antique Wood Plane #45 Combination Plane Beautiful All Original U.S.A.*

The Stanley antique Wood Plane #45 is a beautiful combination plane made in the United States. This original piece from the renowned brand Stanley is a valuable collectible for woodworking enthusiasts. With its antique charm and all original components, this plane is not only a functional tool but also a piece of history that showcases the craftsmanship of American woodworking.