An ORIGINAL CHIP BREAKER AND FIXING SCREW for Upson Nut Company transitional planes No. 28, 29, 30, 31 and 36 by the Upson Nut Company, Unionville, Connecticut. This chip breaker, which measures 1 3/8″ in width, is in excellent condition and could be put directly to use. Length = 7.25 Inches (Ref. Id No.: 401084) [Free Shipping]
Archives
Orig. 2 3/8″ Lever Cap for Upson Nut Co. No. 36 Transitional- 95% – mjdtoolparts
An ORIGINAL FROG MECHANISM for an Upson Nut Company No. 36 transitional plane by the Upson Nut Company, Unionville, Connecticut. Fully 95% black japan finish remains on this frog, which is designed for use with a cutting iron measuring 2 3/8″ in width. The original screws to secure the frog to the plane body are included as well.This frog hsa the casting for the Mosher Patent lateral adjustment, which was never used on this plane as the expiration of the Leonard Bailey Patents held by Stanley had expired by the time this was produced and the use of the Bailey style lateral was no longer restricted. Length = 6.50 Inches (Ref. Id No.: 462059) [Free Shipping]
Orig. Body/Frog Mech. for Upson Nut Co. No. 36 Transitional Plane – mjdtoolparts
An ORIGINAL TRANSITIONAL PLANE BODY AND FROG MECHANISM for an Upson Nut No. 36 transitional plane by the Upson Nut Company, Unionville, Connecticut. This plane is designed for use with a cutting iron measuring 2 3/8″ in width. The frog has the distinctive Karrmann Patent lateral adjustment mechanism. Both the body and frog are in excellent condition. Length = 10.00 Inches (Ref. Id No.: 401085) [Free Shipping]
Orig. Stained Beech Handle for Upson Nut No. 26 Transitional Plane- mjdtoolparts
An ORIGINAL STAINED BEECH HANDLE AND CAST IRON BASE for an Upson Nut No. 26 transitional jack plane by the Upson Nut Company, Unionville, Connecticut. The wooden handle is secured from with a screw to the caset iron base and the base is secured to the plane body with four screws through the base. The original screws to secure the handle to the plane body are included with the handle. Length = 1.75 Inches (Ref. Id No.: 472819) [Free Shipping]
Orig. Rear Handle Upson Nut Company No. 36 Transitional Plane – mjdtoolparts
An ORIGINAL BEECH REAR HANDLE for an Upson Nut Company No. 36 transitional plane by the Upson Nut Company, Unionville, Connecticut. The handle is absent any chips, cracks or other apologies and could be put directly to use. The original threaded rod to secure the handle the plane body is included as well. Length = 4.00 Inches (Ref. Id No.: 462060) [Free Shipping]
Orig. 2″ Frog for Upson Nut Co. No. 26 Transitional – 95% – mjdtoolparts
An ORIGINAL FROG MECHANISM for an Upson No. 26 or No. 35 transitional plane by the Upson Nut Company, Unionville, Connecticut. Fully 95% of the original black japan finish remains on this frog, which is designed for use with a cutting iron measuring 2″ in width. The original screws to secure the frog mechanism to the plane body are included as well. Length = 6.50 Inches (Ref. Id No.: 472828) [Free Shipping]
Orig. 2″ Lever Cap for Upson Nut Co. No. 26 Transitional- 95% – mjdtoolparts
An ORIGINAL 2″ WIDTH CAST IRON LEVER CAP for an Upson Nut Company No. 26 or No. 35 transitional plane by the Upson Nut Company, Unionville, Connecticut. Fully 95% of the original black japan finish remains on this cap, which is in top collector quality condition. Length = 5.75 Inches (Ref. Id No.: 472817) [Free Shipping]
Orig. 2 3/8″ Cutting Iron for Upson Nut Co. No. 36 Transitional – mjdtoolparts
An ORIGINAL CUTTING IRON for an Upson Nut Company No. 36 transitional bench plane by the Upson Nut Company, Unionville, Connecticut. This 2 3/8″ width iron, which came from an Upson Nut handled transitional plane, is in excellent condition and could be put directly to use. Length = 8.13 Inches (Ref. Id No.: 462062) [Free Shipping]
Orig. 2 3/8″ Iron/Chip Brkr. for Upson Nut Co. No. 28 Transitional- mjdtoolparts
An ORIGINAL CUTTING IRON AND CHIP BREAKER for an Upson Nut Company No. 28, 29, 30 or 31 transitional plane by the Upson Nut Company, Unionville, Connecticut. The top of the cutter is marked with the name “Upson Nut” bent in an arch above the word “Company”. The slot for the depth of cut engagement lever is set higher on transitional planes owing to the thickness of the sole of such planes. The cutting iron, however, is interchangeable with the patented metallic planes produced by this short-lived company. The cutter & chip breaker measure 2 3/8″ in width. Length = 7.75 Inches (Ref. Id No.: 424488) [Free Shipping]
Founder’s Grade Body for Upson Nut Co. No. 26 Transitional Plane – mjdtoolparts
A FOUNDER’S GRADE TRANSITIONAL PLANE BODY FOR AN UPSON NUT NO. 26 TRANSITIONAL PLANE by the Upson Nut Company, Unionville, Connecticut. This body was used with the Karrmann Patente frog mechanism, which was unique to this company. The plane body is clearly marked with the maker name and it is in ready to use condition. Length = 15.00 Inches (Ref. Id No.: 472821) [Free Shipping]