An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 1 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Millers Falls No. 1 drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 1.88 Inches (Ref. Id No.: 464218) [Free Shipping]
Archives
Orig. Early Type 3 Jaw Chuck for Millers Falls No. 303 Hand Drill – mjdtoolparts
An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 303 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. According to Millers Falls’ advertising, the chuck is designed to hold 0″ to 1/4″ round shank bits. This early type chuck is in top condition and could be put directly to use. Length = 2.00 Inches (Ref. Id No.: 457004) [Free Shipping]
Lot Of 2 L Millers Falls Pocket Catalogue – Letter E & K
We are not experts in any field.
Orig. Mahogany Storage Box for Millers Falls No. 109 Carving Set – mjdtoolparts
An ORIGINAL MAHOGANY BOX for a set of Millers Falls No. 109 carving tools by the Millers Falls Company, Millers Falls, Massachusetts. The full, original label remains on the inside of this box, which is designed to hold nine original carving tools. Length = 12.25 Inches (Ref. Id No.: 451784) [Free Shipping]
Orig. Gear Wheel for Millers Falls No. 2-01 Hand Drill- 98% Japan – mjdtoolparts
An ORIGINAL GEAR WHEEL for a Millers Falls No. 2-01 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original red japan finish remains on this essentially unused drill component. The original screw to secure the gear wheel to the drill body is included as well. Length = 3.50 Inches (Ref. Id No.: 385420) [Free Shipping]
Cutting Iron for Millers Falls No. 75 Block Plane – 1 5/8 Inch- mjdtoolparts
An ORIGINAL 1 5/8″ WIDTH CUTTING IRON for a Millers Falls No. 75 block plane by the Millers Falls Company, Millers Falls, Massachusetts. This cutter is designed for the No. 75 block plane, which was the functional equivalent of Stanley’s No. 220 block plane. The iron is in top condition and could be put directly to use. Length = 4.38 Inches (Ref. Id No.: 389105) [Free Shipping]
Orig. Crank Handle & Gear Wheel for Millers Falls No. 1 Drill – mjdtoolparts
An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Millers Falls No. 1 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The handle is marked with the Millers Falls name and number designation. The original fixing screws to secure the handle to the gear wheel and the gear wheel to the drill body are included as well. Length = 4.75 Inches (Ref. Id No.: 414319) [Free Shipping]
Orig. Pasteboard Box for Millers Falls No. 35 Auger Bit Depth Stops-mjdtoolparts
An ORIGINAL PASTEBOARD BOX for No. 36 auger bit depth gauges by the Millers Falls Company, Millers Falls, Massachusetts. This box, which is designed to hold one half dozen of the No. 36 gauges, is in excellent condition. It has four intact corners on the box top and the full, original paper label remains on the front of the box. Length = 4.75 Inches (Ref. Id No.: 371593) [Free Shipping]
Orig. 2 1/4″ Red Infill Lever Cap for Millers Falls 15/15 C Planes- mjdtoolparts
An ORIGINAL PATENT TWO-PART LEVER CAP by the Millers Falls Company, Millers Falls, Massachusetts. This uncommon 2 1/4″ width cap came from a Millers Falls No. 15 heavy jack plane and it is the only Millers Falls plane to use a cap of this size. This clean and well preserved lever cap retains nearly all of its original nickel plating and red japan infill paint beneath the semicircular Millers Falls name casting and could be put directly to use. Length = 7.50 Inches (Ref. Id No.: 457284) [Free Shipping]
Orig. Pasteboard Box for Millers Falls No. 2A Hand Drill-Full Label-mjdtoolparts
An ORIGINAL PASTEBOARD BOX for a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The full, original paper label remains on this box, which is in excellent condition. Length = 15.00 Inches (Ref. Id No.: 451513) [Free Shipping]
Orig. Body/Shaft/Cap for Millers Falls No. 2 A Drill – w/ Decal – mjdtoolparts
An ORIGINAL BODY, SHAFT HANDLE AND HANDLE CAP for a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The full, original Millers Fall decal remains on the handle of this extra clean drill body, which retains its original handle cap. If you have a NO. 2 A hand drill having a damaged or degraded handle, this drill component will put you directly back in business. Length = 13.38 Inches (Ref. Id No.: 451517) [Free Shipping]
Orig. Stained Hardwood Screw Cap for Millers Falls No. 2A Drill – mjdtoolparts
An ORIGINAL SCREW-ON CAP for the wooden magazine handle on a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. These handle caps were frequently damaged or degraded. This one is in excellent conditionand it retains nearly all of its original grain painted finish. It could be put directly to use in restoring a Millers Falls No. 2 hand drill having a missing, damaged or degraded handle cap to its former magnificence. Length = 1.50 Inches (Ref. Id No.: 401744) [Free Shipping]
Orig. Gear Wheel Fixing Screw for Millers Falls No. 2 A Hand Drill- mjdtoolparts
An ORIGINAL GEAR WHEEL FIXING SCREW for a Millers Falls No. 2A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This frequently missing, damaged or degraded screw, which secures the gear wheel to the body of the No. 2 A hand drill is in excellent condition and could be put directly to use. Length = 0.38 Inches (Ref. Id No.: 462316) [Free Shipping]
Orig. Crank Hdl. & Gear Wheel for Millers Fall No. 2A Hand Drill – mjdtoolparts
An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Millers Falls No. 2A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original fixing screws to secure the crank handle to the gear wheel and the gear wheel to the drill body are included as well. Length = 5.88 Inches (Ref. Id No.: 403830) [Free Shipping]
Founder’s Grade Auxiliary Handle for Millers Falls No. 2 A Drill – mjdtoolparts
A FOUNDER’S GRADE AUXILIARY SIDE HANDLE for a Millers Falls No. 2 A gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. frequently. This frequently missing, damaged or degraded drill component is in unused condition and could be put directly to use. As good as they get. Length = 2.25 Inches (Ref. Id No.: 451515) [Free Shipping]
Founder’s Grade Chuck for Millers Falls No. 2 A Hand Drill-Perfect- mjdtoolparts
A FOUNDER’S GRADE THREE-JAW CHUCK MECHANISM for a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This chuck retains its original springs and jaws and it is in unused condition. If you have a Millers Falls No. 2 A drill having a missing, damaged or degraded chuck, this will put you directly back in business. As good as they get. Length = 2.50 Inches (Ref. Id No.: 460903) [Free Shipping]
Orig. Crank Handle Fixing Screw for Millers Falls No. 2 A Drill – mjdtoolparts
An ORIGINAL MACHINE SCREW to secure the crank handle on a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This 3/16″ diameter screw holds the handle tight against the cast iron gear wheel when it is screwed into the receiver hole on the gear wheel. Length = 0.38 Inches (Ref. Id No.: 470443) [Free Shipping]
Founder’s Grade Handle/Gear Wheel for Millers Fall No. 2A Drill – mjdtoolparts
A FOUNDER’S GRADE CRANK HANDLE AND GEAR WHEEL for a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original fixing screws to secure the crank handle to the gear wheel and the gear wheel to the drill body are included as well. Fully 95% of the original red japan and nickel finishes remain on this extra clean and ready to use drill component. Length = 4.88 Inches (Ref. Id No.: 417890) [Free Shipping]
Orig. Cococoblo Cap for Millers Falls No. 2A Hand Drill-98% Finish- mjdtoolparts
An ORIGINAL SCREW-ON CAP for the wooden magazine handle on a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. These handle caps were frequently damaged or degraded. This one is in excellent conditionand it retains nearly all of its original grain painted finish. It could be put directly to use in restoring a Millers Falls No. 2 hand drill having a missing, damaged or degraded handle cap to its former magnificence. Length = 1.50 Inches (Ref. Id No.: 397858) [Free Shipping]
Orig. Gear Wheel/Crank Handle for Millers Falls No. 2A Hand Drill – mjdtoolparts
An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Millers Falls No. 2A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original fixing screws to secure the crank handle to the gear wheel and the gear wheel to the drill body are included as well. Length = 4.88 Inches (Ref. Id No.: 458782) [Free Shipping]
Orig. 3 Jaw Chuck for Millers Falls No. 2 A Hand Drill – Perfect – mjdtoolparts
An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Millers Falls No. 2 A drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 2.25 Inches (Ref. Id No.: 470441) [Free Shipping]
Orig. Unused Body for Millers Falls No. 900 CG-B PLane- Black/Red – mjdtoolparts
An ORIGINAL AND ESSENTIALLY UNUSED BODY AND FROG MECHANISM for a Millers Falls NO. 900 CG-B smoothing plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 98% of the original black and red japan finishes remain on this extra clean Millers Falls plane body and frog. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 402292) [Free Shipping]
Orig. Iron/Chip Brkr. for Millers Falls No. 900 CG-B Plane – mjdtoolparts
An ORIGINAL TWO-INCH WIDTH CUTTING IRON AND CHIP BREAKER for a Millers Falls No. 900 CG-B smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. This cutter and chip breaker are in unused condition and could be put directly to use. Length = 8.00 Inches (Ref. Id No.: 402290) [Free Shipping]
Orig. Front Knob/Rear Hdl. for Millers Falls No. 900 CG-B Plane – mjdtoolparts
An ORIGINAL “EBONIZED” FINISH FRONT KNOB AND REAR HANDLE for a Millers Falls No. 900 CG-B smoothing plane by the Millers Falls Company, Millers Falls, Massachusetts. These handles are in top condition and could be put directly to use restoring a Millers Falls smoothing plane. The original Phillips head long screws to secure the handle and knob to the plane body are included as well. Length = 4.50 Inches (Ref. Id No.: 402291) [Free Shipping]
Orig. Two Inch Frog Mech. for Millers Falls No. 900 Plane – mjdtoolparts
An ORIGINAL FROG MECHANISM for Millers Falls No. 900 smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. This two-inch width frog is finished with black japan finish and it is in essentially unused condition. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 353558) [Free Shipping]