Founder’s Grade Patent Red Infill Cap Millers Falls No. 9 or 14 – mjdtoolparts

A FOUNDER’S GRADE TWO-INCH WIDTH LEVER CAP by the Millers Falls Company, Millers Falls, Massachusetts. Fully 98% of the original nickel plating remains on this cap, which will fit the Millers Falls No. 9 smoothing plane or No. 14 jack plane. It is in absolutely perfect, unused condition. If you have a Millers Falls No. 9 or 14 plane having a damaged or degraded lever cap, this cap will restore your plane to its former magnificence. As good as they get. Length = 5.50 Inches (Ref. Id No.: 399224) [Free Shipping]

Original Patent Lever Cap for Millers Falls No. 9 or 14 Plane – mjdtoolparts

An ORIGINAL PATENT TWO-PART LEVER CAP by the Millers Falls Company, Millers Falls, Massachusetts. This two inch width cap will fit Millers Falls planes No. 9 (Stanley 4 equivalent) or No. 14 (Stanley No. 5). This unused lever cap retains all of its original nickel plating and red japan infill paint beneath the semicircular Millers Falls name casting and could be put directly to use. Length = 5.00 Inches (Ref. Id No.: 464489) [Free Shipping]

Orig. Patent Lever Cap for Millers Falls 10, 18 or 22 – 2 3/8 Inch- mjdtoolparts

An ORIGINAL NICKEL PLATED LEVER CAP by the Millers Falls Company, Millers Falls, Massachusetts. This 2 3/8 inch width cap will fit Millers Falls planes Nos. 10 (Stanley 4 1/2 equivalent), 18 (Stanley No. 6) and 22 (Stanley No. 7). This clean and ready to use lever cap, which is a single section casting, retains most of its original nickel plating and could be put directly to use. Length = 7.75 Inches (Ref. Id No.: 434842) [Free Shipping]

Original Patent Lever Cap for Millers Falls No. 8 or 11 Plane – mjdtoolparts

An ORIGINAL 1 3/4″ WIDTH LEVER CAP for Millers Falls planes No. 8 and No. 11 by the Millers Falls Company, Millers Falls, Massachusetts. Fully 98% of the original nickel plating remains on this uncommon part, which employs the patented two-section design. Length = 5.00 Inches (Ref. Id No.: 397972) [Free Shipping]

Orig. Cast Iron Leg for Langdon Acme No. 1 Mitre Box – w/ Screw – mjdtoolparts

An ORIGINAL CAST IRON LEG for a Millers Falls No. 1 size mitre box by the Millers Falls Company, Millers Falls, Massachusetts. This leg for a Langdon “Acme” type mitre box is in excellent condition without any chips, cracks or apologies. The original fixing screw to secure the leg assembly to the mitre box is included as well. This leg came from a No. 68 version of the No. 1 size mitre box, but it should fit all No. 1 size Langdon “Acme” mitre boxes. Length = 6.50 Inches (Ref. Id No.: 380028) [Free Shipping]

Orig. Cutting Iron for Millers Falls No. 11 “Jr. Jack” Plane – mjdtoolparts

An ORIGINAL 1 3/4″ WIDTH CUTTING IRON by the Millers Falls Company, Millers Falls, Massachusetts. This extra clean cutting iron, which is marked at the top with the triangular Millers Falls logo, will work with the Millers Falls No. 8 and 8 C eight-inch length smoothing planes (Stanley No. 3 Equivalent) and No. 11 Junior Jack planes. This iron will also fit the Stanley No. 3, 3 C, 603, 603 C, 5 1/4 and 5 1/4 C planes. The iron is in excellent condition and could be put directly to use. Length = 7.25 Inches (Ref. Id No.: 447516) [Free Shipping]

Orig. Cocobolo Hdl. Cap for Millers Falls No. 5 Drill- Glue Repair- mjdtoolparts

An ORIGINAL COCOBOLO CAP for an early type Millers Falls No. 5 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This handle has a perfect glue repair to a crack, but it is fully functional with good, original threads and could be put directly to use. Length = 1.75 Inches (Ref. Id No.: 450663) [Free Shipping]

Orig. Grain Painted Handle Cap for Millers Falls No. 2A Drill – mjdtoolparts

An ORIGINAL SCREW-ON CAP for the wooden magazine handle on a Millers Falls No. 2 A hand drill by the Millers Falls Company, Millers Falls, Massachusetts. These handle caps were frequently damaged or degraded. This one was apparently finished with red lacquer over the cocobolo base used on earlier handles. Some of the later type finish has peeled away on the top of the cap, but it is otherwise in excellent condition. Length = 1.50 Inches (Ref. Id No.: 464241) [Free Shipping]

Founder’s Grade Body for Millers Falls No. 9 C Smooth Plane- 99% – mjdtoolparts

A FOUNDER’S GRADE PLANE BODY for a Millers Falls No. 9 C two-inch width smoothing plane by the Millers Falls Company, Millers Falls, Massachusetts. This old hardware stock item retains all of its original black japan and lacquer finishes and is in unused condition. A great Instant Upgrade item. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. As good as they get. Length = 9.00 Inches (Ref. Id No.: 392979) [Free Shipping]

Millers Falls Co. – Full Format Dealer Catalogue No. 38 – Feb., 1922 – 215 Pgs.

A GENERAL LINE CATALOGUE OF TOOLS, No. 38, by the Millers Falls Company, Millers Falls, Massachusetts. This February, 1922 Edition of 215 pages documents and illustrates the full Millers Falls line as it then existed. The book measures 5 1/4″ tall x 3 3/4″ wide and it is in top collector quality condition. Length = 10.50 Inches (Ref. Id No.: 123751) [Free Shipping]

Orig. Crank Hdl. & Gear Wheel for Millers Fall No. 5 Hand Drill-mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL ASSEMBLY for a Millers Falls No. 5 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original fixing screw to secure the gear wheel to the drill body and the screw to secure the crank handle to the gear wheel are included in this ready to use assembly. Length = 4.88 Inches (Ref. Id No.: 391066) [Free Shipping]

Orig. Body for Millers Fall “Buck Rogers” Plane- No. 714 – 95% – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Millers Falls No. 714 “Buck Rogers” jack plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original bluish gray japan finish remains on this plane body, which is marked on the side with the Millers Falls name and number designation. Length = 14.00 Inches (Ref. Id No.: 475577) [Free Shipping]

Extra Clean Long 13/16″ Ship Auger Bit – Millers Falls Company – mjdtoolparts

An EXTRA CLEAN 13/16″ DIAMETER, 22 1/2″ LENGTH, SHIP TYPE AUGER BIT by the Millers Falls Company, Millers Falls, Massachusetts. This bit has a small lead screw and is without spurs on the outside of the leading face. It has a tapered shank designed to accommodate the jaws of a ratchet bit brace. This essentially unused condition auger bit could be put directly to use. Length = 18.00 Inches (Ref. Id No.: 397950) [Free Shipping]

Orig. Cocobolo Rear Handle for Millers Falls No. 22 Jointer Plane – mjdtoolparts

An ORIGINAL BRAZILIAN ROSEWOOD REAR HANDLE for Millers Falls No. 10, 18 or 22 2 3/8″ width bench plane by the Millers Falls Company, Millers Falls, Massachusetts. Nearly all of the original lacquer finish remains on this clean and exceptionally well preserved tropical hardwood handle. Rosewood handles were used only on the very first Millers Falls planes produced, after which grain painted and stained hardwood handles were used. Length = 4.50 Inches (Ref. Id No.: 464510) [Free Shipping]

Founder’s Grade Body for Millers Falls No. 14 Jack Plane-99% Japan- mjdtoolparts

A FOUNDER’S GRADE CAST IRON PLANE BODY for Millers Falls No. 14 jack plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 98% of the original black japan finish remains on this two-inch width plane body from the earliest days of the short-lived Millers Falls plane manufacturing enterprise. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. A great Instant Upgrade item. As good as they get. Length = 14.00 Inches (Ref. Id No.: 404141) [Free Shipping]

Founder’s Grade Side Handle for Millers Falls No. 5 Hand Drill – mjdtoolparts

An original AUXILIARY SIDE HANDLE for a Millers Falls No. 5 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. frequently. This frequently missing, damaged or degraded drill component is in excellent condition and could be put directly to use. Length = 2.25 Inches (Ref. Id No.: 452256) [Free Shipping]

Founder’s Grade Later Hdls. for Millers Falls No. 8/8 C Plane – mjdtoolparts

A FOUNDER’S GRADE FRONT KNOB AND REAR HANDLE for a Millers Falls No. 8 or 8 C eight-inch length smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. These later type handles retain 99%+ of their original grain painted finish and are in brand new, unused condition. The original Phillips head screws to secure the handle and knob to the plane body are included with the handles. As good as they get. Length = 4.50 Inches (Ref. Id No.: 447119) [Free Shipping]

Orig. Early Three-Jaw Chuck for Millers Falls No. 5 Hand Drill – mjdtoolparts

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 5 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. According to Millers Falls’ advertising, the chuck is designed to hold 0 to 1/4″ round shank bits. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Millers Falls No. 5 drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 2.00 Inches (Ref. Id No.: 401987) [Free Shipping]