Antique keyless Chuck Three-Jaw Millers Falls No. 5 Drill Very Rare Vintage

The Antique keyless Chuck Three-Jaw Millers Falls No. 5 Drill is a rare vintage collectible tool from the Millers Falls Company in Millers Falls, Massachusetts. This original antique piece was made in the U.S.A., showcasing the craftsmanship and quality of American manufacturing. The unique design of this drill, with its keyless chuck and three-jaw chuck, makes it a valuable addition to any collection of vintage woodworking tools. Ideal for woodworking enthusiasts and collectors, this drill offers a piece of history and nostalgia from the early 20th century.

Founder’s Grade Three-Jaw Chuck for Millers Falls No. 5 Hand Drill- mjdtoolparts

A FOUNDER’S GRADE THREE-JAW CHUCK MECHANISM for a Millers Falls No. 5 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. According to Millers Falls’ advertising, the chuck is designed to hold 0 to 1/4″ round shank bits. This chuck retains its original springs and jaws and it is in essentially unused condition. If you have a Millers Falls No. 5 drill having a missing, damaged or degraded chuck, this will put you directly back in business. As good as they get. Length = 2.25 Inches (Ref. Id No.: 464396) [Free Shipping]

Orig. Three-Jaw Chuck for Millers Falls No 666 Breast Drill – mjdtoolpart

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 666 aluminum body breast drill by the Millers Falls Company, Millers Falls, Massachusetts. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Millers Falls No. 118 breast drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 3.25 Inches (Ref. Id No.: 468461) [Free Shipping]

Orig Three-Jaw Chuck for Millers Falls No 200 Breast Drill – mjdtoolparts

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 200 breast drill by the Millers Falls Company, Millers Falls, Massachusetts. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Millers Falls No. 200 A breast drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 3.25 Inches (Ref. Id No.: 446860) [Free Shipping]

Orig. Plane Body for Millers Falls No. 16 Block Plane – w/ Screws – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Millers Falls No. 16 six-inch length block plane by the Millers Falls Company, Millers Falls, Massachusetts. The original front knob, throat insert, cam lever and adjusting lever as well as the nut to adjust the depth of cut are included with the plane body. The body is in top condition, retaining some 95% of its original black japan finish. Length = 6.00 Inches (Ref. Id No.: 476609) [Free Shipping]

Founder’s Grade Body, Knob & Adj. Lever for Millers Falls No. 16 – mjdtoolparts

A FOUNDER’S GRADE CAST IRON PLANE BODY for a Millers Falls No. 16 six-inch length block plane by the Millers Falls Company, Millers Falls, Massachusetts. The original front knob, throat insert, cam lever and adjusting lever as well as the nut to adjust the depth of cut are included with the plane body. The body is in top condition, retaining some 95% of its original black japan finish. An uncommon Millers Falls plane in uncommonly nice condition. Length = 6.00 Inches (Ref. Id No.: 417277) [Free Shipping]

Founder’s Grade Iron for Millers Falls No. 16 Block Plane- 1 5/8″ – mjdtoolparts

A FOUNDER’S GRADE CUTTING IRON for a Millers Falls No. 16 or No. 17 adjustable block plane by the Millers Falls Company, Millers Falls, Massachusetts. This 1 5/8″ width cutter is in essentially unused condition. It is clearly marked with the Millers Falls logo. The underside has a series of milled grooves to engage the depth of cut adjustment mechanism. Length = 4.75 Inches (Ref. Id No.: 419595) [Free Shipping]

Orig. 1 5/8″ Cutting Iron for Millers Falls No. 16 & 17 Planes – mjdtoolparts

An ORIGINAL 1 5/8 INCH WIDTH CUTTING IRON for a Millers Falls No. 16 or No. 17 block plane by the Millers Falls Company, Millers Falls, Massachusetts. The No. 16 and 17 are the Millers Falls equivalent of the Stanley No. 9 1/2 and No. 15 block planes. This iron is in excellent condition and could be put diretly to use. Length = 4.75 Inches (Ref. Id No.: 450550) [Free Shipping]

Founder’s Grade Body & Adjusting Screw for Millers Falls No. 16 – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Millers Falls No. 16 six-inch length block plane by the Millers Falls Company, Millers Falls, Massachusetts. The nut adjust the depth of cut and the original front insert to regulate the width of the throat are included with the plane body. The body is in top condition, retaining fully 98% of its original black japan finish. Length = 6.00 Inches (Ref. Id No.: 450511) [Free Shipping]

Orig. Front/Rear Saw Guide for Millers Falls No. 16 1/2 Mitre Box – mjdtoolparts

An ORIGINAL SAW GUIDE for a Millers Falls No. 16 1/2 small size mitre box by the Millers Falls Company, Millers Falls, Massachusetts. This saw guide is interchangeable from the front to the rear post and vice versa. It is in excellent condition and could be put directly to use. Length = 4.75 Inches (Ref. Id No.: 424217) [Free Shipping]

Orig. Cam Lever for Millers Falls No. 16 or 17 Block Plane- Unused- mjdtoolparts

An ORIGINAL CAM LEVER for a Millers Falls No. 56 low angle block plane by the Millers Falls Company, Millers Falls, Massachusetts. This lever is in essentially unused condition, retaining fully 99% of its original nickel plating and it could be put directly to use. Length = 1.50 Inches (Ref. Id No.: 456272) [Free Shipping]

Orig. Knurled Steel Handle Cap for Millers Falls No. 343 Hand Drill-mjdtoolparts

An ORIGINAL KNURLED STEEL HANDLE CAP for a Millers Falls No. 343 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This uncommon cap for the knurled steel handle No. 343 drill is in excellent condition and could be put directly to use. Length = 1.75 Inches (Ref. Id No.: 441058) [Free Shipping]

Millers Falls Co., Millers Falls, Mass.- Catalog No. B (39), 1925 Ed.- 195 Pgs

An original general line POCKET CATALOG OF TOOLS, No. B (39), by the Millers Falls Company, Millers Falls, Massachusetts. This January 1925 Edition of 195 pages measures 5 1/4 inches in height by 3 3/4 inches in width. The full Millers Falls line of braces, drills, planes and related tools as it existed at the time is documented and illustrated in this comprehensive catalog. Length = 5.25 Inches (Ref. Id No.: 123788) [Free Shipping]

Millers Falls Co. – 1886 Edition General Line Catalog – 32 Pages – mjdtoolparts

An extremely early GENERAL LINE CATALOG by the Millers Falls Company, Millers Falls, Massachusetts. This 1886 edition of 32 pages documents the entire Millers Falls line as it existed tt that time. The catalog measures 9″ in height by 5 3/4″ in width. It is in excellent condition, noting a piece of paper pasted to the top left-hand corner of the cover. Length = 9.00 Inches (Ref. Id No.: 134839) [Free Shipping]

Orig. Eight Page Fanfold Promo. Sheet of Millers Falls Hand Tools – mjdtoolparts

An ORIGINAL PROMOTIONAL ADVERTISING INSERT of “Millers Falls Hand Tools” as produced by the Millers Falls Company of Millers Falls, Massachusetts. This eight-page fanfold insert, which was likely packed with Millers Falls tools in their original boxes, mesaures 12″ tall by 7″ in width when fully unfolded. An uncommon Millers Falls advertising sheet in top collector quality condition. Length = 12.00 Inches (Ref. Id No.: 464214) [Free Shipping]

Millers Falls Co., Millers Falls, Mass.- Catalog No. B (39)- Jan. 1925 – 195 Pgs

A GENERAL LINE CATALOG, No. B (No. 39), by the Millers Falls Company, Millers Falls, Massachusetts. This January 1925 Edition of 195 pages measures 5 1/2 inches in height by 4 inches in width. The full line of specialized tools offered by this market leading company at the time is illustrated and documented in this comprehensive catalog. Length = 5.50 Inches (Ref. Id No.: 123775) [Free Shipping]

Millers Falls Original Knob for No. 9 or 14 Smooth or Jack Plane – mjdtoolparts

An ORIGINAL UNUSED FRONT KNOB for a Millers Falls No. 9 or 9 C smoothing plane by the Millers Falls Company, Millers Falls, Massachusetts. All of the original lacquer finish remains on this knob, which is appropriate for the Millers Falls No. 9 or 14 series of planes. Length = 2.13 Inches (Ref. Id No.: 464484) [Free Shipping]

Orig. Box for Millers Falls No. 55 Block Plane – Full Paper Label -mjdtoolparts

An ORIGINAL PASTEBOARD BOX for a Millers Falls No. 55 lever adjust block plane by the Millers Falls Company, Millers Falls, Massachusetts. This box, which has four intact corneres on both the top and bottom portions of the box, retains its full, original paper label and is in excellent collector quality condition. Length = 6.00 Inches (Ref. Id No.: 439399) [Free Shipping]

Cutting Iron for Millers Falls No. 16 Block Plane- 1 5/8 Inch – mjdtoolparts

An ORIGINAL 1 5/8″ WIDTH CUTTING IRON for a Millers Falls No. 16 or No. 17 block plane by the Millers Falls Company, Millers Falls, Massachusetts. The No. 16 and 17 are the Millers Falls equivalent of the Stanley No. 9 1/2 and No. 15 block planes. This iron is in top condition and could be put diretly to use. Length = 4.75 Inches (Ref. Id No.: 450815) [Free Shipping]

Cam Lock Cap for Millers Falls No. 700 Block Plane – 1 5/8 Inch- mjdtoolparts

An ORIGINAL CAST IRON SCREW LOCK CAP for a Millers Falls No. 700 non-adjustable block plane by the Millers Falls Company, Millers Falls Massachusetts. The cap retains fully 95% of its original black japan finish. The tension screw, which is secured on the underside of the cap, retains nearly all of its original nickel plating. Length = 4.50 Inches (Ref. Id No.: 466758) [Free Shipping]

Orig. Crank Hdl./Gear Wheel/Screw for Millers Falls No. 105 Drill – mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL for a Millers Falls No. 105 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original fixing screws to secure the gear wheel to the drill body and the screw to fasten the crank handle to the gear wheel are included as well. Length = 4.50 Inches (Ref. Id No.: 428479) [Free Shipping]

Founder’s Grade Millers Falls No. 4 Nickel Plated Jeweler’s Drill – mjdtoolparts

A FOUNDER’S GRADE NICKEL PLATED JEWELER’S HAND DRILL, No. 4, by the Millers Falls Company, Millers Falls, Massachusetts. Fully 99% of the original nickel plating remains on this pristine Millers Falls drill, which has a rosewood crank handle. exagonal chuck. These early nickel plated drills were likely to have their plating peel following exposure to moisture, but this one must have been in a very dry place for the last 125 years. As good as they get. Length = 8.00 Inches (Ref. Id No.: 468597) [Free Shipping]