Orig. Two Inch Frog Mech. for Millers Falls No. 900 Plane – mjdtoolparts

An ORIGINAL FROG MECHANISM for Millers Falls No. 900 smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. This two-inch width frog is finished with black japan finish and it is in essentially unused condition. The original screws and washers to secure the frog mechanism to the plane body are included as well. Length = 7.00 Inches (Ref. Id No.: 353558) [Free Shipping]

Front Knob/Rear Handle for Millers Falls No. 900 Plane – Hardwood – mjdtoolparts

An ORIGINAL STAINED HARDWOOD FRONT KNOB AND REAR HANDLE for a Millers Falls No. 900 smoothing plane by the Millers Falls Company, Millers Falls, Massachusetts. Nearly all of the original lacquer finish remains on these handles, which include the original screws to secure them to the plane body. Length = 4.50 Inches (Ref. Id No.: 379951) [Free Shipping]

Orig. Unused Body for Millers Falls No. 900 Smoothing Plane – mjdtoolparts

An ORIGINAL CAST IRON PLANE BODY for a Millers Falls No. 900 nine-inch length smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original gray japan finish remains on this clean and well preserved plane body. If you have a plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 9.00 Inches (Ref. Id No.: 352801) [Free Shipping]

Front Knob/Rear Handle for Millers Falls No. 900 Plane – Ebonized – mjdtoolparts

An ORIGINAL EBONIZED FINISH FRONT KNOB AND REAR HANDLE for a Millers Falls No. 900 smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. The Millers Falls name is imprinted in gold lettering on the side of the rear handle. Both the handle and knob are in clean and ready to use condition. The original threaded rods and brass nuts to secure the handle and knob to the plane body are included as well. Length = 4.50 Inches (Ref. Id No.: 353559) [Free Shipping]

Orig. Body & Ratchet Mechanism for Millers Falls No 97 Breast Drill-mjdtoolparts

An ORIGINAL CAST IRON FRAME AND GEARING MECHANISM for a for a Millers Falls No. 97 heavy duty ratcheting breast drill by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original black japan finish remains on this body, which holds the complex gearing mechanism. The gearing mechanism is if perfect mechanical condition. If you have a Millers Falls No. 97 breast drill having a degraded body or fouled gear mechanism, this extra clean and fully functional body will put you directly back in business. 1 1/2″ gw shaft. Length = 15.00 Inches (Ref. Id No.: 380139) [Free Shipping]

Orig. Gear Wheel/Crank Hdl. & Screws for Millers Falls No. 2 Drill- mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL ASSEMBLY for a Millers Falls No. 2 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original fixing screw to secure the gear wheel to the drill body and the screw to secure the crank handle to the gear wheel are included in this ready to use assembly. Length = 6.25 Inches (Ref. Id No.: 447397) [Free Shipping]

Orig. Gear Wheel for Millers Falls No. 5 Hand Drill – 90% Japan – mjdtoolparts

An ORIGINAL GEAR WHEEL for a Millers Falls No. 5 gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. Approximately 90% of the original red japan finish remains on this clean and ready to use drill component. The original screw to secure the gear wheel to the drill body is included as well. Length = 3.50 Inches (Ref. Id No.: 386627) [Free Shipping]

Orig. Gear Wheel for Millers Falls No. 2 A Hand Drill – 90% Japan – mjdtoolparts

An ORIGINAL GEAR WHEEL for a Millers Falls No. 2 A gear driven hand drill by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original red japan finish remains on this essentially unused drill component. The original screw to secure the gear wheel to the drill body is included as well. Length = 3.50 Inches (Ref. Id No.: 380104) [Free Shipping]

Orig. Gear Wheel for Millers Falls No. 77 Hand Drill – w/ Screw – mjdtoolparts

An ORIGINAL CAST IRON GEAR WHEEL for a Millers Falls No. 77 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. Fully 90% of the original red japan finish remains on this clean and undamaged gear wheel. If you have a No. 77 hand drill having a missing, damaged or degraded gear wheel, this will put you directly back in business. Length = 3.25 Inches (Ref. Id No.: 380191) [Free Shipping]

Orig. Gear Wheel Fixing Screw for Millers Falls No. 2 Hand Drill – mjdtoolparts

An ORIGINAL GEAR WHEEL FIXING SCREW for a Millers Falls No. 2 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. This frequently missing essential drill component is designed to fit through the center of the cast iron gear wheel on the Millers Falls hand drill and secure it to the threaded receiver on the body of the drill. The earliest models used a different manner of securing the gear wheel, but this screw will work on most models produced after 1915, or thereabout. Length = 0.38 Inches (Ref. Id No.: 457209) [Free Shipping]

Orig. Gear Wheel & Crank Handle for Millers Falls No. 2 Drill – mjdtoolparts

An ORIGINAL CRANK HANDLE AND GEAR WHEEL for an early Millers Falls No. 2 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. The original screws to secure the crank handle to the gear wheel and the gear wheel to the drill body are included as well. This assembly came from an early Cocobolo handle No. 2 and the handle on the crank is turned from the same material. Much of the original red japan finish is missing, but the handle and gear wheel are otherwise in superb condition and could be put directly to use. Length = 5.50 Inches (Ref. Id No.: 441029) [Free Shipping]

Orig. Cast Iron Body for Langdon “Acme” No. 1 Mitre Box – Perfect – mjdtoolparts

An ORIGINAL CAST IRON AND STEEL FRAME for a Millers Falls No. 1 Langdon “Acme” mitre box by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% of the original black and red japan finishes remain on this extra clean mitre box frame. Millers Falls, as did the Langdon Mitre Box Company before them, used to number designations for their mitre boxes. The first specified the size, in this case “No. 1” and the numeric designation, which referred to the size of the saw provided with the mitre box, in this case “No. 68”. Length = 19.38 Inches (Ref. Id No.: 380037) [Free Shipping]

Orig. Empty Box for Millers Falls No. 85 Rabbet Plane- Taped – mjdtoolparts

An ORIGINAL PASTEBOARD BOX for a Millers Falls No. 85 rabbet and filletster plane by the Millers Falls Company, Millers Falls, Massachusetts. The full, original label remains on this box, which has one separated rear corner and some tape repairs on th inside. Length = 10.50 Inches (Ref. Id No.: 419667) [Free Shipping]

Orig. Empty Box for Millers Falls No. 85 Rabbet Plane- Excellent – mjdtoolparts

An ORIGINAL PASTEBOARD BOX for a Millers Falls No. 85 rabbet and filletster plane by the Millers Falls Company, Millers Falls, Massachusetts. The full, original label remains on this box, which has all intact corners with only some minor stains and scuffs on the top and the edges. Length = 10.50 Inches (Ref. Id No.: 390192) [Free Shipping]

Depth Stop for Millers Falls No. 85 Rabbet Plane- 99% Japan – mjdtoolparts

An ORIGINAL CAST IRON DEPTH STOP for a Millers Falls No. 85 rabbet plane by the Millers Falls Company, Millers Falls, Massachusetts. The Millers Falls depth stops for the No. 85 rabbet plane were configured differently than a depth stop for a Stanley plane and the two are not interchangeable. This original Millers Falls depth stop is in top condition and could be put directly to use. Length = 3.00 Inches (Ref. Id No.: 452356) [Free Shipping]

Orig. Breast Pad for Millers Falls No. 120 Breast Drill -w/ Screw – mjdtoolparts

An ORIGINAL CAST IRON BREAST PAD for a Millers Falls No. 120 breast drill by the Millers Falls Company, Millers Falls, Massachusetts. Much of the original finish is missing, but this breast pad is structurally perfect and could be put directly to use. The original square head fixing screw to secure the breast pad to the drill body is included as well. Length = 5.38 Inches (Ref. Id No.: 464257) [Free Shipping]

Orig. 3 Jaw Chuck for Millers Falls No. 343 Hand Drill – Perfect – mjdtoolparts

An ORIGINAL THREE-JAW CHUCK MECHANISM for a Millers Falls No. 343 hand drill by the Millers Falls Company, Millers Falls, Massachusetts. According to Millers Falls’ advertising, the chuck is designed to hold 0 to 1/4″ round shank bits. This chuck retains its original springs and jaws and it is in superb working condition. If you have a Millers Falls No. 343 drill having a missing, damaged or degraded chuck, this will put you directly back in business. Length = 2.00 Inches (Ref. Id No.: 441057) [Free Shipping]

Orig. Front Knob for Millers Falls No. 8 or 8 C Plane – w/ Screw – mjdtoolparts

An ORIGINAL STAINED HARDWOOD FRONT KNOB for a Millers Falls No. 8 or 8 C smooth plane by the Millers Falls Company, Millers Falls, Massachusetts. Fully 95% original lacquer finish remains on this extra clean and ready to use knob. The original threaded rod to secure the knob to the plane body is included as well. Length = 2.50 Inches (Ref. Id No.: 473139) [Free Shipping]

Millers Falls Company – 1925 Dealer Catalog – Full Line – Lg. Format – 195 Pgs.

An original full format dealer size GENERAL LINE CATALOG, No. 39, by the Millers Falls Company, Millers Falls, Massachusetts. This January 1925 Edition of 195 pages measures 10 1/2 inches in height by 7 1/2 inches in width. The full Millers Falls line of drills, braces, saws, levels and boring machines is documented and illustrated in this comprehensive early catalog. Length = 10.50 Inches (Ref. Id No.: 123753) [Free Shipping]

Orig. Replacement Jaws for Millers Falls Leland 1916 Patent Chuck – mjdtoolparts

AnORIGINAL PAIR OF JAWS FOR A LELAND’S PATENT BIT BRACE. These jaws will fit braces produced with the Leland Patent chuck, which was patented on May 30, 1916 by John A. Leland of Montague, Massachusetts and produced by the Millers Falls Company, Millers Falls, Massachusetts. This jaw assembly retains its original spring and it is in ready to use condition. Length = 2.75 Inches (Ref. Id No.: 472059) [Free Shipping]

Orig. Box for Millers Falls No. 909 8″ “Plain” Screwdrivers – mjdtoolparts

An ORIGINAL PASTEBOARD BOX for Millers Falls No. 909 8″ “Plain Screwdrivers” by the Millers Falls Company, Millers Falls, Massachusetts. The full, original paper label remains on this box, which is imprinted on the top and sides with the Millers falls triangular logo. The box is in top condition, with sound corners on both the top and bottom of the box Length = 14.50 Inches (Ref. Id No.: 443981) [Free Shipping]