Orig. Screw Lock Cap for Tower & Lyon Chaplin Pat. Block No. 15 – mjdtoolparts

An ORIGINAL SCREW LOCK CAP for a No. 15 Chaplin’s Patent block plane by Tower & Lyon, New York, New York. This cap is designed for use with the No. 15 plane, which uses a 1 5/8 inch cutting iron. Approximately 90% of the original black japan finish remains. Length = 4.00 Inches (Ref. Id No.: 446083) [Free Shipping]

parts or restore as-is incomplete Tower & Lyon Chaplin’s Patent wood block plane

You are bidding on one incomplete Tower & Lyon Chaplin’s patent wood block plane as pictured. It has some condition issues, so please keep reading.It is marked on the iron with “O R CHAPLIN’S PATS TOWER & LYON NEW YORK MAY 7 ’72 JULY …….”. The last part of that date isn’t legible, but that date is July 4, 1876. The first patent turns out to be patent 126,519, awarded to Orril R Chaplin of Boston, Massachusetts, for his improvements in carpenter’s planes. The second patent turns out to be patent 179,494, awarded to John J Tower of New York City for his improvements to the tote and knob on bench planes, and seemingly not really relevant to this plane. But it is good advertising.Overall length of the body is about 6-7/16″. The iron is about 1-9/16″ in width at the lower edge, and is about 4-3/4″ in length. The plane features the corrugations on the top side of the body, the smooth sole, the adjusting lever under the frog or blade support, and the throat is not adjustable on this plane. The cap is missing from the plane. There is a hole in each side of the plane, near the top of each arched side, and I don’t believe that those holes are original. I’m guessing that the throat has been opened up on the forward edge under the cross rib, and the corners aren’t square as can be seen.Condition would otherwise be good. The sole has a variety of scratches and several small casting flaws. The japanning on the top side is worn in places, and there is some rust showing through the japanning around the front knob. The front knob unthreads easily, and has some rust showing through the nickeling. The blade support and lever are in good condition. The iron has some patina (color) and lots of lengthwise scratches, and was probably sanded to clean it up.EXCEPT as noted, there are no cracks or chips or chunks missing from any of the castings, and everything operates properly. SHIPPING: Over 1 pound, shipped USPS Ground Advantage in a padded envelope, insurance is included. No International shipping. l sell what I enjoy, and I collect antique woodworking tools and I enjoy photography! The queue is overflowing with tools right now, as they seem to be finding me faster than I can list them. So please keep watching my postings as I have LOTS more to list!Searching my listings: I have lots to see! Some of you will undoubtedly enjoy browsing through everything, but if you want to hone in on something specific, I suggest you click on the “Visit Store” link in Seller Information section in the upper right of this listing. That will lead you to my extensive system of categories. How to subscribe to my eBay newsletter? Every Friday eBay sends out my newsletter featuring 10 of my most interesting new listings. To subscribe, click the VISIT STORE to go to my eBay store and then click on the heart symbol that is labeled SAVE SELLER. That will automatically get you on the mailing list for the newsletters. They are free, and you can unsubscribe at any time. ETHICS IN DESCRIPTIONS: I also buy for my collecting on eBay, and I have been burned too many times by misleading (duh did I forget to mention …….) descriptions, and auctions with pictures only of the left side because the right side was trashed. Life is much simpler for me if I disclose what I know or see about an item before you bid, and especially before you receive it in the mail. I come from the handshake school of doing business, and hopefully you are like me and understand what that means. What goes around, comes around.RETURN POLICY: I believe that if you give honest descriptions, and include enough pictures, you shouldn’t need a return policy. However, that doesn’t mean that I won’t make an occasional mistake. Please bid with the assurance that if I have made an error in my listing, I WILL take care of you. And if you have made an error, and bought the wrong size, for example, I will still take care of you (but I’ll let you pay the return shipping!).USPS POSTAGE RATE INCREASES: I use the Post Office for everything, and yes, the shipping charges just keep going up and up. The Post Office now has several prices increases during each year, raising a few things but not everything at each increase. And they now raise their rates during the Holidays, which means early October to late January. Their big increases are in January, timed to start at the end of the Holiday rates, and this year is no exception. And it’s not just the postage rates, the insurance charges and the delivery signature charges have also gone up. There is now a surcharge for Priority Mail packages over 20″ long, and another for Priority Mail packages over 30″ long, because those longer packages won’t fit in their automatic machines. And the Post Office has discontinued the Regional Flat Rate boxes, which were often less expensive for certain sizes and weights. I try to pick the best shipping option for each listing, based both on what is the least expensive and on what I think is needed to protect the item. If the value is $250 or over, eBay requires your signature at delivery for the buyer and seller protections to be in effect.SALES TAX: Interstate sales tax is now the reality on all the major selling websites including eBay. If I ship to a state where eBay is required to collect sales tax, eBay will charge you the sales tax for your location. There is lots of information available from eBay that explains it in much more detail. The sales tax is completely out of my hands — I don’t have anything to do with deciding whether to charge tax, I don’t have anything to do with deciding the tax rate, and I never see any of the funds that are collected, they go directly to eBay.SELLING OUTSIDE OF EBAY: Why would I risk my lengthy good standing with eBay to save you a couple of dollars? Especially when you ask on an email that is sent through the eBay email system? Please don’t ask, the answer is no.INTERNATIONAL SHIPPING: I no longer ship Internationally other than Canada. If you are in Canada, ask for what the shipping would cost, but be prepared for it to be $$$$$. AUCTIONS: I won’t end an auction listing early to sell it to you directly. As a bidder, I really dislike going back at the end of an auction to bid, only to discover that the seller had ended the auction early. So I won’t do that for you, or to you.PACKAGING: Please check my feedback — I package well. I figure if you take the time to purchase from me, then I can take the time to package it well, and not just throw it into a cereal box with a scrap of newspaper.I hope someday I will meet some of you as we trudge the happy road of tool collecting!

Original World Trade Center Embossed Key WTC Twin Towers 9/11 September 11th

This is an original door key from the World Trade Center in New York City. It is the embossed (raised lettering) version of the key which is harder to find than the often sold stamped versions which sometimes come up for sale. It is from the estate of an ex employee. It was found in a mixed bag of house keys. That is all the info I have on it and I do not have any names. The key is in used condition as seen in photos. Please view all photos for condition and sizing measurements before purchase. Thanks!

parts or restore Tower & Lyon Chaplins patent wood block plane w/ lever adjuster

You are bidding on one Tower & Lyon Chaplin’s patent wood block plane as pictured. It has some condition issues, so please keep reading.It is marked on the iron with “O R CHAPLIN’S PATENTS TOWER & LYON NEW YORK MAY 7 ’72 JULY 4 ’76”. The first patent turns out to be patent 126,519, awarded to Orril R Chaplin of Boston, Massachusetts, for his improvements in carpenter’s planes, including the lever cap design used on this plane.The second patent turns out to be patent 179,494, awarded to John J Tower of New York City for his improvements to the tote and knob on bench planes, and seemingly not really relevant to this plane. But it is good advertising.Overall length of the body is about 6-7/16″. The iron is about 1-9/16″ in width at the lower edge, and is about 4-9/16″ in length. Both sides of this plane, especially the left side, are paper thin along the upper edges, and the left side upper edge is almost knife-like because it is so sharp, and requires careful handling. The upper edge on the left side has numerous little chips, one large chip at the front end, and a crack which is visible in the 4th picture. The upper edge on the right side is much better, but still has some tiny chips. The throat is also chipped in one corner. Condition would otherwise be good, and it would benefit from a cleaning. The sole has some light pitting and some lengthwise scratches from a cleaning. Much of the japanning remains. The front knob has a few dings and really needs cleaning. The support for the iron has a bit of pitting. The iron has lots of patina (color) but no pitting. The japanning on the cap is worn especially on top, and both lugs on the cap are intact. Except as noted, there are no other cracks or chips or chunks missing from any of the castings, and everything operates properly. SHIPPING: 2 pounds when boxed, insurance is included. No International shipping. I sell what I enjoy, and I collect antique woodworking tools and I enjoy photography! The queue is overflowing with tools right now, as they seem to be finding me faster than I can list them. So please keep watching my postings as I have LOTS more to list! Searching my listings: I have lots to see! Some of you will undoubtedly enjoy browsing through everything, but if you want to hone in on something specific, I suggest you click on the “Visit Store” link in Seller Information section in the upper right of this listing. That will lead you to my extensive system of categories. How to subscribe to my eBay newsletter? Every Friday eBay sends out my newsletter featuring 10 of my most interesting new listings. To subscribe, click the VISIT STORE to go to my eBay store and then click on the heart symbol that is labeled SAVE SELLER. That will automatically get you on the mailing list for the newsletters. They are free, and you can unsubscribe at any time. ETHICS IN DESCRIPTIONS: I also buy for my collecting on eBay, and I have been burned too many times by misleading (duh did I forget to mention …….) descriptions, and auctions with pictures only of the left side because the right side was trashed. Life is much simpler for me if I disclose what I know or see about an item before you bid, and especially before you receive it in the mail. I come from the handshake school of doing business, and hopefully you are like me and understand what that means. What goes around, comes around.RETURN POLICY: I believe that if you give honest descriptions, and include enough pictures, you shouldn’t need a return policy. However, that doesn’t mean that I won’t make an occasional mistake. Please bid with the assurance that if I have made an error in my listing, I WILL take care of you. And if you have made an error, and bought the wrong size, for example, I will still take care of you (but I’ll let you pay the return shipping!).SALES TAX: Interstate sales tax is rapidly becoming a reality in more and more states. If I ship to a state where eBay is required to collect sales tax, eBay will charge you the sales tax for that state. There is lots of information available from eBay that explains it in much more detail. The sales tax is completely out of my hands — I don’t have anything to do with deciding whether to charge tax, I don’t have anything to do with deciding the tax rate, and I never see any of the funds that are collected, they go directly to eBay.SELLING OUTSIDE OF EBAY: Why would I risk my lengthy good standing with eBay to save you a couple of dollars? Especially when you ask on an email that is sent through the eBay email system? Please don’t ask, the answer is no. SHIPPING IN THE US: I would rather that you spend your money on my stuff, and not on shipping. I package well, and have a great track record of getting everything to each buyer, and getting it there in one piece. I try to pick the best shipping option for each listing, based on what is the least expensive, and based on what I think is needed to protect the item. I use the US Post Office for everything. If the value is $250 or over, eBay requires your signature at the USPS delivery for the buyer and seller protections to be in effect.USPS POSTAGE RATE INCREASE AS OF January. Every year the US Postal Service raises rates in mid to late January, and this year is no exception. INTERNATIONAL SHIPPING: I no longer ship Internationally.AUCTIONS: I won’t end an auction listing early to sell it to you directly. As a bidder, I really dislike going back at the end of an auction to bid, only to discover that the seller had ended the auction early. So I won’t do that for you, or to you.PACKAGING: Please check my feedback — I package well. I figure if you take the time to purchase from me, then I can take the time to package it well, and not just throw it into a cereal box with a scrap of newspaper.I hope someday I will meet some of you as we trudge the happy road of tool collecting!

Orig. Plane Body Chaplin’s Improved No. 1211- 24 Inch Length – mjdtoolparts

An ORIGINAL CAST IRON BODY for a Chaplin’s Improved Patent twenty-four inch length jointer plane, No. 1211, by Tower & Lyon, New York, New York. This plane, which takes a 2 5/8 inch width cutting iron is in superb condition, retaining some 90% of its original black japan finish and the front and back rods for securing the knob and handle to the plane. If you have a Chaplin’s Improved No. 1211 plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 24.00 Inches (Ref. Id No.: 345380) [Free Shipping]

Orig. Plane Body Chaplin’s Improved No. 1211- 24 Inch Length – mjdtoolparts

An ORIGINAL CAST IRON BODY for a Chaplin’s Improved Patent twenty-four inch length jointer plane, No. 1211, by Tower & Lyon, New York, New York. This plane, which takes a 2 5/8 inch width cutting iron is in superb condition, retaining some 95% of its original black japan finish. If you have a Chaplin’s Improved No. 1211 plane having a chipped, damaged or degraded body, this extra clean and undamaged component will put you back in business. Length = 24.00 Inches (Ref. Id No.: 364264) [Free Shipping]

48708-9N00A Ignition Switch Electronic Steering Lock Compatible with Nissan

[Compatible Models] 48708-9N00A Ignition Lock Kit Compatible with Nissan Altima 2007-2013, Nissan GTR 2009-2011, Nissan Maxima 2009-2010, Nissan 370Z 2010-2012. [Replace Part Number] Ignition Switch Electronic Steering Lock replace for 48708-9N00A/ D8700-JF00D/ D8700JF00D/ 48700-9N0/ 48700-9N00B/ 487009N00B/ 48700JF00A/ 48700-JF00A/ 48700-JF00B/ 48700-JF00C.

Vintage KNIPEX 99-250 Concreters Nippers 10 Inch End Cutting Pliers Germany

Vintage KNIPEX Concreters’ Nippers, model 99 250, made in Germany. Also known as tower pincers, end cutting nippers, or steel fixers’ nippers. Forged steel construction with 10-inch (250 mm) overall length. Marked “KNIPEX 99-250” and “Germany” on the handles. Condition Good vintage condition. Jaws are clean and align properly. Shows light surface wear and patina from normal use. Opens and closes smoothly.

Orig. Later Type 2″ Cutter for Chaplin’s Improved No. 1205 Plane – mjdtoolparts

An ORIGINAL 2 1/8″ WIDTH CUTTING IRON for a Chaplin’s Improved smoothing plane, No. 1205, by Tower & Lyon, New York, New York. This extra clean cutter is clearly marked with the maker name and patent information. Unlike bench planes by Stanley and other major makers, the jack plane size of the Chaplin’s Improved plane uses a slightly wider cutting iron, measuring 2 1/8″ in width. Length = 6.38 Inches (Ref. Id No.: 393372) [Free Shipping]